How to disable the opening video on Microsoft Combat Flight Simulator3

Similar Questions

• How to disable the onboard video HP ENVY 700-210xt.

  I try to install the card EVGA 650 TI boost.  How to disable integrated video.

  Product HP ENVY 700-210xt number: E9G99AV.

  There the

  This was the solution: http://support.hp.com/us-en/document/c03653200

• Satellite C855 1VD - how to disable the "open - Panel" marketing?

  Hello

  I want to disable the feature ' open - panel power on ", I checked the BIOS setting where it is disabled. However, the laptop boot always starts when I open the Panel. Also tried via the application of parameters of system Toshibe in Windows 8, no effect.

  Satellite C855 1VD - Windows 8
  BIOS is version 3.27 (cannot find a newer BIOS update)

  Can someone help me?

  THX.

  Diego.

  Procedure is described in http://aps2.toshiba-tro.de/kb0/FAQ2C03FA0001R01.htm?
  A complete stop and it will work if your laptop is turned off.

• How to disable the connection of identity when opening Outlook Express

  How to disable the connection of identity when opening Outlook Express

  In OE: File | Identities | Manage identities | Properties and uncheck the option to require a password.

• How to disable the scaling software IPR and PPP compatible as Microsoft Office.

  original title: scaling software IPR and PPP compatible as Microsoft Office.
   
  Hello!
  Does anyone know how to disable the scaling of the DPI (or how custom scale) in IPR software compatible?
  In particular, how can I disable display picture in "Microsoft Office 2010"?
  Disable in properties of control does not work as it does for non-Microsoft programs.
  I have a screen 1440 x 900, and for most of the tasks, I prefer the screen so it should be about 4' of me usually use scaling of IPR. The problem is that in MS Office, the Ribbon of the toolbar > 25% of the screen on this setting. Hide the Ribbon is an option, but if I could selectively disable scaling (as I do with the chrome) - all my problems could be solved.
  Thanks for the advice/input!
  Rich

  Thank you for your empty insulting response. I wonder if your answer is just an automated response.

  Well, I was going to answer the Fahimulla K and politely point out that they may have misunderstood your question because you seem to have the "how-to" down to "Disable the display timing of high DPI settings" in the compatibility of most of the Programs tab.  So say what you said apparently is that Microsoft Office 2010 programs do not seem to allow that (the selection isn't activated - grey - so you cannot select)- but you have decided to go in a different direction (more rude/crude) before I got the chance.

  It will not win you a favor here - it is above all a forum for peer-to-peer (user to user).  Politeness a bit for the people spend their time (and as far as I know - the real Employees from Microsoft that poster here do still their choice, not obligation) goes a long way.  A little profanity goes even further - but not in the desired direction.  * smile *.

  However, I had planned on looking into this because he was intrigued, so despite the generally rude responses by you in the two posts, I found you so far - I'll post the results of my research (and my job steps) here in case it might be useful to someone.  I'll probably respond to the other post and a link to this post as well.

  At this stage, while having access to several computers, some with Office 2007 again and others with Office 2010 32 bit, I had not found the time to test and see if it is linked to all Office 2010 64-bit or not.  I confirmed that this setting does not seem to be available in Windows 7 (64 bit) for individual products Microsoft Office 2010 (64-bit versions.)

  An interesting thing I found in the Microsoft Knowledge Base has been "scale of the graphical object Microsoft Graph is reduced inside the bounding box when you insert it into a workbook in Excel" where they actually change you the setting in the Task Manager process tab-->.  This doesn't seem to work (not yet available) for common products (Word, Excel, etc.) as he says he does it to the CHART. EXE.

  So by doing research and without more information from you (such as possibly critical details that you probably have Windows 7 64-bit and 64-bit Microsoft Office 2010) and tests on one machine 64-bit Windows 7 but 32-bit Office 2010 - I note the checkboxes in the compatibility settings are available.  I first thought about this possibility when I noticed a part of this article:
  http://www.SevenForums.com/tutorials/316-compatibility-mode.html
  ... when they say, ' "NOTE: If the compatibility options are grayed out, then it is a 64-bit program and cannot be changed.".

  So - I would say the second part of the answer of the Fahimulla K would be a great place to start (and you did, looking at this post from you in the forums Microsoft Office... about a minute after the display of it here.)

  I think that you maybe isn't luck if - * if * you run the 64-bit version of Office 2010 that is.  Even Microsoft (for a long time - maybe still) recommended and installed Office 2010 32-bit default products.

  • http://social.technet.Microsoft.com/forums/en/Office2010/thread/40d17c38-90e0-48D9-8F83-d9721a24b063
  • http://Office.Microsoft.com/en-us/Word-help/choose-the-32-bit-or-64-bit-version-of-Microsoft-Office-HA010369476.aspx

  Not for the reason will be addressed during the conversation; even though it is an interesting puzzle and would not be limited to just Microsoft Office - but any 64-bit application, you can install.  Their idea was that in general there is some 64-bit plugins and same problem with 32-bit plugins that existed / exist for Microsoft Office.

  My suggestion, if my hypothesis about what architecture of Microsoft Office that you have installed is correct, would be to uninstall Microsoft Office 2010 64 bit and install Microsoft Office 2010 32-bit.

  Hope that helps someone.

• Sliding right key while pressing F8 bar opens in the AUTOCAD program. How to disable the same?

  Original title: disable f8 for straight sliding bar

  Hello

  I am new to windows 8 and when I work in the AUTOCAD program of mi I need to press the f8 key again and again, but every time I press it, the right slider bar openes and I can not use the KEY COMMAND in AUTOCAD, which is essential for a quick job.  How to disable the luck o the function key f8

  Thank you!

  Hi Lucie,.

  For a better understanding of the issue, let me know if you referring to the charm Bar or slider to the AutoCAD program?

  If you are referring to the bar of charms, he will not open by pressing the F8 key. For more information on the charms bar, refer to the following article.

  Using the charms for things you often

  If you are referring to the scroll bar with in the AutoCAD program, you can check with the help of AutoCAD if there are all the settings can be changed.

  http://forums.Autodesk.com/T5/custom/page/page-ID/discussions-page

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I don't have a message to tell me the image my takes up screen is set to full screen. How to disable the who and the fade slow when he goes to fs?

  In Firefox 42

  When a site like youtube when I make the video fullscreen it just melted slow useless when it does. And then tells me that it is full screen. I know that it is full screen for two reasons. One, I hit the button fullscreen. Two, the video takes up my entire screen. The message point. Use the fade. How can I disable them?

  To disable the fade, you can change these preferences of the topic: config page.

  • full-screen - api .transition - duration.enter: "0 0".
  • full-screen - api .transition - duration.leave: "0 0".

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  I do not know how to disable the warning, but it might be possible to hide this message with code to userChrome.css or elegant.
  This message is displayed for security reasons because a malicious script can switch to full screen mode and take over the entire window without noticing you (i.e. show a fake office).

• 5102na HP OMEN: how to disable the audio correction Bang & Olufsen horrible?

  Is there someone who could tell me please how to disable the audio correction Bang & Olufsen? I'm sure that some people like it but I work with audio and I can't really how it changes the sound. I tried to open the Bang & Olufsen sign but I cannot unselect the correction in the section "listening experience", nor that I can change the associated equalization. Please someone help, thanks!

  I found a solution: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-Audio-compression-and-volume-fluctuation-HP-ENVY-m6/m-p/5137867/highlight/true#M67144

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio. This is the device driver for BeatsAudio (a bit sneaky, wouldn't you say?).
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with the high definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes.
  12. Now enjoy your music with no compression!

  Thanks to SteveCT99

  This does not disable audio-Bang & Olufsen, but I just installed this EQ across the system instead: http://sourceforge.net/projects/equalizerapo/

  HP needs to release a driver which allow us access to the "Improvements" tab so we can turn off "Loudness equalization" (although "Loudness equalization" should not be on by default in the first place).

  The current driver is default.

• How to disable the backup works when you print an email?

  How to disable the backup works when you print an email.  Whenever I try to print an e-mail, save it as a PDF is displayed.  I then have to save, then open the file to print.

  Hello

  Thanks for posting your query on the Microsoft Community.

  To disable this feature, you need to uninstall Adobe reader and then check if still back you the question quickly.

  Kind regards

  Jesinta Rozario

• How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  Original title: SoundMAX Integrated Digital Audio

  How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  I need SoundMAX Integrated Digital Audio

  Hello

  Why you trying to update the audio, video and game controllers?

  The following steps may be helpful:

  1. open the Device Manager.

  2. Locate the audio, video and game controllers and expand it.

  3 click the sound card, and then click Update driver.

  For more information: http://support.microsoft.com/kb/283658

• How to disable the screen saver

  Hello world

  Does anyone know how to disable the screensaver for Winodws 7 via Group Policy or regisity.

  Thank you

  Ivan

  Hello

  Thanks for your posting in Microsoft Community

  Open the Start Menu and type gpedit.msc into the search box and press ENTER.
  When the local Group Policy Editor opens, navigate to User Configuration-Administrative Templates-Control Panel-personalization. Then in the right column, double-click on prevent the background screen change.
  Now, check the radio button next to Enabled, and then click OK.
  Back on the screen of group policy, double-click on prevent changing the screen saver.
  In the next screen select the next radio button to activate it, click OK, and then close the Group Policy Editor.
  If you click on to change the screen saver, an error message appears to let them know that the function is disabled.

• How to disable the zoom pinch?

  Hello

  I'm having the same problem with a KVS of Photo of Photo Booth by...

  I use a piece of software which allows this application to run, turns the corner thingies and the windows button on a Tablet samsung win8 ATIV 500 t.  The problem is that the software is not disable the Jack/zoom feature so that customers are trying to get their photos thought greater than the zoom works but it is screwing up the kiosk application because he has his own zoom.  I tried to find the options to turn off the feature, but my Tablet says that I don't even have a mouse installed.

  Help, please!

  Carl

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-TMS/how-to-disable-pinch-zoom-on-Windows-8-touchscreen/286c093d-2445-4956-8307-32f1714645f5

  Hi Carl,

  -What is the correct/complete message you receive while turning pinch zoom feature off?

  Synaptics and Cypress is the most popular touch-pad drivers. I'll show you how to disable the zoom gesture using each.

  First Synaptics disable the pinch zoom:

  1. Press the Windows key + X, select Control Panel.
  2. In the options list, select mouse and then click on mouse to the top of the search results. This will open the mouse properties window.
  3. Then, click on the tab to the right, the device settings and click on the settings button.
  4. In the left column, click Pinch Zoom and uncheck the box on the right labeled enable Pinch Zoom.
  5. Click OK to save your preferences.

  For laptops with the touchpad Cypress driver:

  1. Open the properties of mouse as before.
  2. Then click the TrackPad Cypress tab and click the link "Click to change settings for TrackPad Cypress."
  3. Click the 2 fingers gestures tab, then uncheck the box to Zoom in and out.
  4. Click OK to save your preferences

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• How to disable the toolbar to search related

  Visiting a few results from web sites in the appearance of a toolbar on the left, called "related searches." How to disable the toolbar?

  I have the feeling that it is injected by one of your modules. Here's my method to track down and clean the bad modules and ad injectors. I know it seems long, but it's not so bad.

  (1) open the Control Panel, uninstall a program. After the loading of the list, click on the column heading "installed on" to group infections, I mean additions by date. This can help the undisclosed items bundle smoker who snuck out with some software, you have agreed to install. Out as much garbage as possible here.

  (2) open Firefox page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons
  • in the Windows "Run" dialog box, type or paste
    firefox.exe "about:addons"

  In the left column, click on Plugins. Set essential and unrecognized plugins 'never enable '.

  In the left column, click Extensions. Then, in case of doubt, disable (or delete, if possible) not recognized and unwanted extensions.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

  (3) you can search the rest of problems with scanning/cleaning tools listed in our technical support article: Troubleshooting Firefox problems caused by malware. These scanners on request are free and take a long time to run. If they end quickly, especially if they require the payment you have a serious infection. I suggest the specialty forums listed in the article in this case.

  Success?

• How to disable the shortcut of Windows 8 F1

  Whenever I click on F1 he opens Windows Help and Support. I read on the forums about how to to disable it but none for Windows 8. I need the F1 key for games.

  KleinC,

  If you press the ESC key when you turn on the computer, it should give you a start menu.

  Select Configuration of the BIOS (F10). This will take you to a configuration utility. Arrow during setup of the system.

  You should now have the option to disable the action keys.

  Here is a link that will show you how to disable the action keys.

  I would like to know how everything goes.

• How to disable the backlight on the keypad for the Qosmio X 70-A-120

  Please, do you know how to disable the backlight on the keypad for the QOSMIO X 70-A-120?

  Concerning

  Open "assist Office > function key" and you will find the option of keyboard backlight. Change in status OFF and t should be disabled.

  Check it out.