How to disable VGA integrated PowerEdge T710

Similar Questions

• Zbook Studio G3 HP: How to disable the integrated graphics card Intel and use the dedicated Nvidea graphics all the time?

  Dear all,

  I have a HP zbook studio G3 laptop. I want to go to the Nvidia graphics card permanently.  I tried to disable graphics integrated in the Device Manager, uninstall the driver and allowing even the nvidea card chart of all profiles in the parameter 3D tap in the Nvidia configuration software. Non of them seems to work as the integrated graph is always in action and simple games could not be executed. I always keep in the option to high-performance mode, and the laptop is still connected. Should I manipulate the bios setup?

  Thanks in advance,

  Bezzi

  I have the version non-studio of Zbook 15 G3 which has removable video card. I added the video card after purchase and found that it worked just right if I went into the BIOS and set it to use only the nVidia card. However, because yours is graphic switchable I don't know that you have this option. Have you looked at even the BIOS? Press ESC you turn on, then F10

• Add a PCI video card disable VGA integrated au245av

  I tried to add a 2nd monitor to my HP AU245AV using a PCI video card.  Unfortunately the built-in VGA port get disabled.

  I was going to add two additional monitors, but this problem has blocked me on 2.  How can I keep the integrated VGA port enabled after adding other PCI video cards.  Nothing jumped eyed me in BIOS and I see no DIP switches on the motherboard.

  mfaklis wrote:
  How can I keep the integrated VGA port enabled after adding other PCI video cards.

  You can not.  Turning off the video of the motherboard when adding a PCIe card is a 'feature '.

• How to disable the integrated graphics card? HP Pavilion a6400f

  I intend to install a new NVIDIA PCI-E x 16 video card, but my HP Pavilion a6400f comes with an Intel integrated graphics. I know that you need to disable the onboard graphics, but how? I checked the BIOS but couldn't find an option to turn it off. Any help?

  Message edited by soadfreak2005 on 01/16/2009 11:24

  You go to control panel, system maintenance, and then Device Manager. Scroll down and look for graphics cards, click the plus tab, click on the model of integrated graphics card you have. Then right click and a menu appears, select turn off and that's all. Then follow the instructions on your new graphics card. Good luck...

• How to disable the integration of Contribute CS5 desktop?

  Hello

  When I installed the collection CS5, Contribute itself installed in my Word and Excel toolbars. It does not appear to have adversely affected Excel, but I suspect that Contribute is the culprit of havoc with the operation of my model Normal.dot in Word 2003.  I would like to turn it off to start when I start Word (remove the integration with Word) to test my theory, but I don't know how.  Can someone help me with this?  I use a PC with Windows 7.

  Thank you!

  Hi guy,

  Us headache with CS3 - but even here you must cancel the registration of the plugin. I made a batch file and it stuck in, one to save it and then cancel the registration. If I just had the unregister command, then it would fail on some PC - bit Edition CS3 in your CS5 directory:

  regsvr32 /s "C:\Program Files\Adobe\Adobe help CS3\OfficePlugin.dll"

  regsvr32 /u /s "C:\Program Files\Adobe\Adobe help CS3\OfficePlugin.dll"

• Disable browser integration - DC

  How to disable browser integration in Adobe Reader DC or DC Adobe?

  Reg with the bBrowserIntegration parameter does not work in the new version of DC.

  Concerning

  Hey PHO-A2SEA,.

  Google Chrome & Firefox uses it own PDF viewer plugin, you can turn them off to stop the browser to open the PDF file.

  If its IE or Safari, you can disable Adobe PDF viewer plugin to achieve the same result.

  Kind regards
  Nicos

• Satellite L70-B-150 - how do I disable the integrated graphics card

  Hi everyone (sorry for my English)

  I bought Satellite L70-B-150, it has two graphics cards: integrated intel hd 4600 + amd radeon r9 m265x,.

  How to disable BIOS (or uefi or otherwise), the graphics card intel?
  Of course, I know I can disable win8 equipment control panel, but what I need is to disable since the whole pc, because my linux operating system does not support the bi - gpu.

  Thank you in advance for a solution

  How to disable BIOS (or uefi or otherwise), the graphics card intel?

  It is not possible to disable the GPU (no matter if its gpu internal or external) in the BIOS.
  This option is not supported by the BIOS.
  You can disable the internal GPU in Device Manager, or you can configure the settings to use only the nVidia GPU.
  This can be done in the nVIdia Control Panel.

• How can I disable the integrated graphics card Intel so I can adapt the best graphics card Optiflex 270

  I have a FSFY27J that I under stand is a Dell optiflex 270.

  How can I disable the integrated graphics card Intel so I can adapt the best graphics card

  Thank you

  Walter

  Hi Walter-W,

  If your system is an OptiPlex gx270s you top AGP slot to set up a discrete video card. The integrated video card is automatically disabled when you connect the discrete video card.

• How to disable the feature phone

  I want to use my Apple Watch only as a watch and heart rate monitor. I want to turn off all notifications like phone calls, SMS and so on.

  I tried to disable it from the phone My Watch-> phone-> customized (instead of mirror my phone)-> show alerts = disabled but... when I get a phone call my watch always warns me. How to disable this?

  It's good that the Apple Watch has these features, but I want to use just as a watch with features of integrity check, I find it embarrassing to have the calls diverted to the watch.

  Thank you

  Hello

  To configure your devices such as your watch is no longer produces noise or lights up the screen calls or messages:

  On your iPhone, in the application of the watch, go to: My Watch (tab) > General > do not disturb > disable mirror iPhone.

  When you display the time on your watch, drag upward on the screen to open the eyes > drag left / right for the look of settings > turn on do not disturb (click on the button with the Moon icon) > slide down once again to exit.

  More information:

  https://help.Apple.com/watch/#/apd62807a9f3

• How to disable the onboard video HP ENVY 700-210xt.

  I try to install the card EVGA 650 TI boost.  How to disable integrated video.

  Product HP ENVY 700-210xt number: E9G99AV.

  There the

  This was the solution: http://support.hp.com/us-en/document/c03653200

• Qosmio F50-126: how to activate the integrated graphics card?

  Running Windows 7 on F50 - 126.
  After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.

  Manufacturer: NVIDIA;
  type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
  memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
  memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
  connected bus: PCI Express 16 x

  I want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
  Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.

  The computer seems to work at full power.
  Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?

  I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?

  Hi mate

  I'm a bit confused of m.
  Why?
  Because you ask about activation and deactivation of the graphics card (integrated).

  First of all, there is ONLY a single graphic chip!
  It s a GeForce 9700 M GTS graphics card.

  The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!

  In addition, the chip supports shared system memory. It depends on the available main memory!

  For example:
  * With the help of Win 32 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
  TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1279MB
  TOTAL available graphics memory: 1791 MB

  * With the help of Win 64 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB
  TOTAL available graphics memory: 1279MB

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1791
  TOTAL available graphics memory: 2303

  As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM

• Disable the integrated graphics card?

  Hello

  I have a Dell XPS 15 L502X. So I recently installed a game called Wolfenstein: The New Order. And everytime I start the game I get an error known on the web as "wglCreateContextAttribsARB failed".

  I know that the cause of the error is that the game keeps identifying my integrated graphics (Intel HD 3000) as the main graphics card so that I have a dedicated onboard graphics (Nvidia GeForce GT 540 M, 2 GB dedicated memory).

  The problem is that my integrated card only supports OpenGL 3.1 and below, although my GPU supports up to OpenGL 4.0. I know for a fact that this GPU is able to run the game and YES I already chose my GPU as the primary graphics card under manage 3D, the global settings settings AND parameters of the program specific AND even tried setting the PhysX Configuration as the GPU itself at unsuccessfully.

  I also tried to disable my Intel HD 3000 by Device Manager (couldn't turn it off via bios), but whenever I do so that turns off the display of my laptop. However, I have a TV that my laptop is connected via HDMI. If my laptop screen is transferred to my TV and I can not change/turn my laptop displays ONE unless I had to re - activate the integrated graphics card. Strange in my opinion!

  On the other side, I ran the game without the integrated graphics card (when), and the game runs very well! CLEARLY the GPU (GT 540 M) is able to run this game, although the game is not identify him. Instead only identify the integrated Intel HD Graphics 3000 card or identifies the onboard graphics as the main reason any!

  Need help please, I want to play the game on my laptop screen not on my TV... Also on a side question, is it possible to completely disable my integrated graphics (Intlel HD 3000) without losing my screen? If so, how?

  Thank you for your time.

  EDIT: I discovered that a similar problem, I used to have with another game (watch dog) on the demanding game run my video card to support DirectX 11 for the game (so it never ran), now works correctly when I turn off my integrated graphics card and use my TV as my main screen! EVEN IF my GT 540 M is to satisfy the minimum requirements for the game!

  You can switch between graphics cards - Intel low performance for graphic intensive application of navigation/less graphically and using nVidia graphics high-performance hungry applications in graphics resources like games.

  You can take a look on the link shows to switch between the graphics card Intel and discrete graphics (nVidia, in your case):

  http://www.YouTube.com/watch?v=DCh9Eob0mNY

• How to disable the built-in PDF Viewer and use another Viewer at all times?

  How to disable the built-in PDF Viewer and use Adobe Reader to view the PDF files, without having to set this preference, whenever I open Firefox? The default setting to "Use Adobe Acrobat (in Firefox)". Thank you.

  It's strange. The integrated Viewer - Viewer by default - is described by the expression 'Preview in Firefox' and you will have changed to "Use Adobe Acrobat (in Firefox)".

  Well... you or an add-on or another program on your system must be changed.

  What happens if you disable the Adobe Acrobat plugin (not the extension to create a PDF file, leave it active). Here's how you can try this:

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. On the right side, find "Adobe Acrobat" and change the permission 'never enable '.

  Then in the Options page, Applications Panel, change your preference for "Portable Document Format (PDF)" to "Always ask" so you get the dialog box to download instead of the PDF, open in a tab.

  It sticks?

• How to disable the "Insert smart card" dialog box keeps appearing after the connection?

  Running Windows 7 64 bit on a laptop Dell which includes and integrated smart card reader. My configuration does not require a smart card to log on. I was wondering if the smart card reader has worked, I plugged a card chip used on another system. The driver is installed automatically, so it appears the drive works.

  Now, whenever I log in, the "Insert smart card" dialog box is displayed. If I cancel or close the box, he continues to reappear every few seconds. How to disable this behavior?

  Update: this is somehow connected to Outlook 2003. I have 4 different e-mail accounts. The "Insert smart card" box appears only when checking for my att account (yahoo), which is configured by using POP3.

  Go to the Services.msc and check the settings for the smartcard (manual test) service.

  Tom

  PS 29 December 2011

  The position of the OP, have been reported since a lot of this problem on the some notebooks Dell and HP. There are a few reports that a replacement of the motherboard fixed the problem and the other that the relocation of a certain connector (no mention of exaclly one that) solves the problem. Direct contact with the manufacturer of the laptop computer, Dell or HP wether, might be useful. Try a follow-up if you have already made contact.

  Tom

• Windows 2012 on PowerEdge T710

  Windows 2012 will be installed on a PowerEdge T710?  Is there a version of systems management tools and Documentation that will have drivers for a PERC 6 / i and Windows 2012?

  Greg,

  The T710 supports Server 2012 (Standard & Datacenter). As much as the disk GDPS, he was arrested near the release of Server 2008 as the drivers of our controllers are already present in the OS support. This allows you to start right on the OS media. It goes the same for 2012. Then you should be able to boot directly from the installation media.

  On another note, support.dell.com has a drop-down list of OS that has Server 2012, so we have released for this OS so drivers.

  Let me know how it goes.