How to control automatic shutdown when the battery is discharged using Windows

Similar Questions

• How to control automatic scrolling when using the tool pen?

  Is there a way to control the SPEED that Photoshop scrolls when you use the pen close to the rim of a document? If a line of the path direction is suddenly slipped off the screen PSD moves the window WAY out of position. It's boring.

  Not that I'm missing, it can be annoying.

• How to start the virtual machines automatically invited when the VMware Server 2 for Windows host boots

  The title pretty well summarizes my doubt... before I used VMware Server 1, but I can't find the option of starting the virtual computer to start host under the dialogue box "set up the VM.

  Please see attached screenshot.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Screen of the blackBerry Smartphone is no longer automatically stop when the phone is not used

  I have a Verizon 8830.  I have the side switch programmed to lock the device.  In the past, when I blocked the device, the screen would turn off after 2 seconds, which would save battery.  Now, when I lock it, the display turns off after two seconds but then it turns back on.

  I can get it to decrease intensity with backlight settings, but I can't have to go completely dark.  As far as I know, I have not changed any settings.

  Any ideas?

  It fixed the old-fashioned way... I did a hard reset.  It works again.

• How to make thumbnails enlarge when the effects of navigation using grid with jquery

  I used an effect of navigation grid with jquery to display several thumbnails but I would like to than images to enlarge to a larger size when they are clicked on, I don't want another window to open it, but the image should appear on the same page as the album, except that I don't need to a gallery, just the function is expanded. Please see code below my page and the link to see the demonstration of the net asset value of grid with jquery that I used (effect-"lines move", example 9).

  http://tympanus.NET/Codrops/2011/06/09/grid-navigation-effects/comment-page-2/#comments

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > my < /title > Gallery

  < link href = "stylesheet.css" rel = "stylesheet" type = "text/css" / > "

  < link href = "gridNavigation.css" rel = "stylesheet" type = "text/css" / > "

  < link href = "reset.css" rel = "stylesheet" type = "text/css" / > "

  < style type = "text/css" >

  {body

  background-color: #000000;

  }

  a: link {}

  text-decoration: none;

  color: #f1d379;

  }

  a: visited {}

  text-decoration: none;

  color: #f1d379;

  }

  a: hover {}

  text-decoration: none;

  color: #9d6f1b;

  }

  a: active {}

  text-decoration: none;

  color: #f1d379;

  }

  < / style >

  "< script type =" text/javascript"src="scripts/jquery-1.6.1.min.js "> < / script >

  "< script type =" text/javascript"src="scripts/jquery.easing.1.3.js "> < / script >

  "< script type =" text/javascript"src="scripts/jquery.mousewheel.js "> < / script >

  "< script type =" text/javascript"src="scripts/jquery.gridnav.js "> < / script >

  < script type = "text/javascript" >

  {$(function()}

  $('#tj_container').gridnav ({}

  type: {}

  lines: 2.

  mode                    : 'rows',                               // use def | fade | seqfade | UpDown | sequpdown | showHide | Scatters | lines

  Speed: 1000, / / for fade, updown, sequpdown, seqfade, showhide, disperse, lines

  easing: "easeInOutBack", / / for fade, updown, sequpdown, seqfade, showhide, disperse, lines

  factor: 150, / / seqfade, sequpdown, lines

  reverse: "/ / for sequpdown

  }

  });

  });

  < /script >

  < / head >

  < body >

  < div class = 'container' id = "container" >

  < div id = "navbar_gallery" class = "#navbar_gallery" >

  < ul >

  < li > < a href = "index.html" > homepage < /a > < /li > ""

  < li > < a href = "about_me.html" > about me < /a > < /li > ""

  < li > < a href = "gallery.html" > Gallery < /a > < /li > ""

  < li > < a href = "contact.html" > Contact < /a > < /li > ""

  < /ul >

  < / div >

  < div class = "maintext" id = "page_maintext" >

  < class p = "page_heading" > my < /p > Gallery

  < / div >

  < div class = "content Exemple5" >

  < div id = "tj_container" class = "tj_container" >

  < div class = "tj_nav" >

  < span id = "tj_prev" class = "tj_prev" > </span > previous

  < span id = "tj_next" class = "tj_next" > next </span >

  < / div >

  < div class = "tj_wrapper" >

  < ul class = "tj_gallery" >

  < li > < a href = "#" > < img src = "images/1.jpg" alt = "image01" / > < / has > < /li > "

  < li > < a href = "#" > < img src = "images/2.jpg" alt = "image02" / > < / has > < /li > "

  < li > < a href = "#" > < img src = "images/3.jpg" alt = "image03" / > < / has > < /li > "

  < li > < a href = "#" > < img src = "images/4.jpg" alt = "image04" / > < / has > < /li > "

  < li > < a href = "#" > < img src = "images/5.jpg" alt = "image05" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/6.jpg" alt = "image06" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/7.jpg" alt = "image07" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/8.jpg" alt = "image08" / > < / has > < /li > "

  < li > < a href = "#" > < img src = "images/9.jpg" alt = "image09" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/10.jpg" alt = "image10" / > < / has > < /li > "

  < li > < a href = "#" > < img src = "images/11.jpg" alt = "image11" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/12.jpg' alt = 'image12' / > < / a > < /li >"

  < li > < a href = "#" > < img src = "images/13.jpg" alt = "image13" / > < / has > < /li > "

  < li > < a href = "#" > < img src = "images/14.jpg" alt = "image14" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/15.jpg" alt = "image15" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/16.jpg" alt = "image16" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/17.jpg" alt = "image17" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/18.jpg" alt = "image18" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/19.jpg" alt = "image19" / > < / a > < /li > "

  < li > < a href = "#" > < img src = "images/20.jpg" alt = "image20" / > < / a > < /li > "

  < /ul >

  < / div >

  < / div >

  < / div >

  < / body >

  < / html >

  Remove the first slash in front of the call to the jquery and style sheet:

• I want to make my laptop plugged in, but do not load when the battery reaches 95%. How can I do?

  H !!!

  I want some help to train you...

  There are growing problem in many portable of peoples that their laptop shows connected but does not support...

  But it's not my problem.

  My problem is just the opposite of it.

  I want to make my laptop plugged in but not in charge when the battery reaches 95% how can that I do?

  Hoping answers from you...........................................................................................................

  Original title: Performance and tools

  JNMilan,

  It is not possible. You must use a third-party software to do or contact the manufacturer.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Back to us for any problem related to Windows in the future.

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• It is advisable to always run a laptop on sector when the battery is fully charged?

  Someone told me that when you use your laptop with the battery charged upwards and plugged power cord you run the risk of overloading your battery which could lead to the destruction of your battery.  Is this possible?

  Hello

  This is up-to-date information which is the case of the old systems with NiCad and NiMh batteries.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With
  systems today, the premiums is not a problem.
  
  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have online forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.
  
  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Taking care of your laptop battery
  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Fuze 4 GB warning disconnect and reconnect to Windows 7 pc... when the battery is low.

  So I just got a rocket and I love it.  Done a good deal about it.  Windows 7 picked it up and transfer of music is not a problem when the unit is fully charged.

  What IS a problem, is that when the battery is low and I have to plug the "rocket" on my PC to load... it keeps connection / disconnection.  The program of control of rocket guard Center popping up and go, arise and disappear... frustrating.  I tried the DPW and MCP modes (actually in DMC mode on the control panel is not everything and it does not recognize that the device is connected).  I've tried different USB ports.  No hub at issue here.

  Here's the kicker... If I load the "rocket" first (plug into a USB Kindle charger), once it has loaded it connects very well.

  Ran the update of the firmware and I'm on the latest firmware it was available, 1.02.31.

  I would like to know how to solve this problem, because I don't always have the small USB Kindle charger with me, and that would well be load from a PC... which is what the original, right intention was?

  Except that I like it and really dig the FM radio tuner.  It is very bad!

  Hosers, all.

  Usb hub 4 ports powered solved my problem.  'duh, I think yer cable is bad' I DO NOT.  Apparently, the "rocket" sucks just too much power.

  So I solved my problem with a $ 5 usb hub.  Yippee.

• If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore all changes since the first full file

  If time machine is incremental how it removes previous versions when the disk is full, without breaking the chain, so do not be able to restore the file with any changes made since the full backup first file...

  If the TM drive storage is full TM automatically deletes the version the oldest files for the new incremental backups can be made. Thus, in this case you cannot restore the versions that TM deleted because it takes more storage.

• When the battery drops below 50% the Satellite P200 turns off

  The laptop turns off when the battery is less than 50%.
  Do I have to get a new battery or what?

  Hello

  I guess you have preinstalled Vista.
  Have you checked your vista power management configuration?

  There you can assign some settings that would control the laptop turned off depending on the State of the battery.

  I think you need to set it to a lower level for example 5%

• don't want itunes to automatically start when the ipod is connected to the pc

  How can I prevent itunes from automatically launching when the ipod shuffle is connected or when the pc starts?

  Open iTunes, go in Edition > Preferences > devices and place the check mark to prevent sync automatically when the device is connected.

• Use of AC when the battery is at 100%? (S7-391)

  Hello world!

  I have been affected by the worst support from Acer, I have no problem with the ultrabook himself (Acer Aspire S7-391) but I have some doubts about pilots and other things, that they have avoided answering many ways. So, here's the thing:

  This ultrabook has all drivers that could be use the AC power when the battery charge reaches 100% to avoid tampering with the battery?

  The thing is that while I have 100% of the battery and the ultrabook is connected to the power adapter, it always seems to be draining the battery power and recharging it back to being 100% all the time.

  When I ask about the drivers, who might or might not be installed, I just need to find a way to access this functionality if possible, and if I can't, I need to know as soon as POSSIBLE so that I can start unplug the laptop right after that the battery has reached 100%.

  Thanks in advance.

  As you said with Connector 2 power pins can also disconnect the battery charge. It can disconnect the power supply from the battery charging circuit when the battery reaches a particular % with the laptop running load in power cables. I do not think that your computers support portable setting the level of charge of battery to a % custom. Your laptop must have a particular hardware and BIOS that supports. In some laptops, the BIOS has the ability to define a particular % of battery charge. I read somewhere that windows 8 do not support this feature, old version of windows (Vista) support this feature.

  Some write up I found online to help you.

  Memory effect

  First of all, it is necessary to unfold a myth that persists in the minds of many people.

  The effect of stack memory.

  In the basis of lithium batteries, it is in fact a myth, it applies only to the old nickel-based batteries. Therefore fully discharge and recharge the battery are completely useless and even harmful as discussed below.

  The modern lithium battery can be charged independently of its current percentage, because he has absolutely no negative effect in his performances.

  Should I remove the battery when the a/c is connected?

  Many users of portable computers have this question and we will answer it right now:

  The answer is: YES and NO, it depends on the situation.

  Have a fully charged battery and the laptop is connected is not harmful, because as soon as the load level of 100% of the battery stops receiving the energy load and this energy is shorted directly on the power of the laptop system.

  However, there is a downside to keep the battery in the holder when the laptop is plugged in, but only if he currently suffers from excessive warming caused by the hardware of the laptop.

  So:

  -In normal use, if the laptop does not get too hot (CPU and hard drive around 40 ° c to 50 ° c) the battery must remain into the Jack of the laptop;

  -Intensive use, which leads to a large amount of heat produced (i.e. games, temperatures over 60 ° c) the battery should be removed the socket in order to avoid unwanted heating.

  The heat between the fact that he has 100% load, is the great enemy of the lithium battery and not the plug, as many might think so.

  Battery discharging

  Full battery discharges (until the computer laptop power shutdown, 0%) should be avoided, because he insists a lot on the battery and may even damage it. It is recommended to perform partial discharge to levels of capacity of 20 ~ 30% and frequent accusations, instead of performing a complete discharge followed for a full charge.

  Laptop PC battery contain a gauge of capacity that allows us to know the exact amount of stored energy. However, due to the charge/discharge cycles, this sensor tends to be inaccurate overtime.

  Some laptops include in their BIOS, tools to recalibrate the battery meter, which is nothing else than a full discharge followed by a charge complete.

  So to calibrate the gauge, it is desirable, in all cycles 30 discharge, a full uninterrupted discharge, followed by a too, non-stop, full charge.

  An inaccurate gauge may have to the fact that the capacity of the battery are values are false. The battery can report that he still has 10% of capacity, when in fact it has a much lower value, and this causes the computer to the unexpected shutdown.

  Cycles of discharge (or charge) are to use this charge battery (100%), but not necessarily all at once.

  For example, you can use the laptop for a few minutes in a day, using half of its e ability then it load completely. If you did the same thing the next day, it can be considered a discharge cycle, not two, so it may take several days before finishing a complete discharge cycle.

• Power HP Pavilion g7-1310us ca not detected when the battery is installed.

  OS: Windows 7 64-bit Ultimate.

  When AC and battery power available, the laptop wants to run on battery. Test the battery with AC plugged ends upward with a message similar to "the battery is OK, but the test did not complete because AC is not plugged.

  When the battery is removed, the laptop works fine on AC.

  Unplugged AC and battery, power button that is held for a minute, reconnected battery and HQ - the problem persists. Tried removing / reinstalling compatible Microsoft ACPI control method battery driver - did not help either.

  The laptop runs all the BIOS the most recent and the software updates that have been available through HP software support support.

  Center of Service HP solved the problem by replacing the AC adapter

• LR6 will not automatically start when the memory card is inserted

  Hello

  Recently upgraded to LR6 from LR 5.7.1. When LR 5.7.1 was installed, it would automatically start when the memory card is inserted. With only LR6 installed it does not open when the memory card has been inserted.

  I "see the import dialog when a memory card is detected."

  I have LR installed 6.0.1.

  When the memory card is inserted, you receive the following error message:

  

  If I right click on the disk memory and select Auto Open play, a list of programs appear particularly LR. The program is highlighted is

  

  If I click on LR in the list above, I encounter error "Application not found".

  When I manually start LR6, it works and I can manually import from memory card.

  What can I do to fix this?

  Thank you

  Stu

  Yes, Autoplay is still trying to run LR5.

  There is a previous thread with notes on how to edit the Windows registry to resolve this problem, if you are comfortable doing.