How to disconnect an internal DVD drive failing?

Similar Questions

• Equium A60: How to remove the CD/DVD drive

  I own an Equium A60 PSA67E and need to know how to remove the CD/DVD drive. A few days ago I tried to completely remove the underside of my laptop by removing all the screws. After doing this I found that most of the underside was loose, but the CD/DVD drive was always held in place, which means that I couldn't

  Hello

  I m not 100% sure, but I think there is a screw under the keyboard that attach the drive. You must remove the keyboard and check if there are screws that fix the drive.

• How do you format a DVD drive in XP

  How do you format a DVD drive in XP

  Hi GeoffHulme,

  You can follow these steps and check if that helps:

  a. Insert the DVD on your computer.
  b. double click on my computer.
  c. right click on your CD/DVD drive, and then click Format.
  d. in the file system list, click format UDF.
  e. click Start.
  f. click OK to start the formatting.
  g. click OK again after the formatting is completed.

  Hope the helps of information.

• Cannot copy my Xbox360 games - how to check what CD/DVD drive I have

  Hello

  just bought my laptop recently and im trying to copy my original Xbox 360 games. All sorted out on programs etc... only one problem...
  The driver or firmware of this pc needs updating (or so I found on the net). It says "Failed to set L0 data zone capacity"... and field not valid in the CBD. Someone had this problem?

  What should I do? How can I check if I have the latest firmware.

  Thank you

  Chris

  Hello

  You can easily find details of CD/DVD players.
  Go in my computer-> do a right-click on the CD Player / DVD-> properties-> hardware

  You will find the information on your CD/DVD drive installed.

  If you need the firmware check in detail
  Device Manager-> right click on CD drive / DVD-> properties-> driver tab

  You will find information like for example these (this may be different on your laptop)
  IDE\CDROMMAT * A_DVD-RAM_UJ-852S__ * 1.80*

  1.80 is the version of the firmware!

• Satellite Pro A120 - how to replace the CD/DVD drive?

  Hello

  My DVD/CD drive does not work much more and I want to replace it, but cannot find a way how to remove it from the drive. Anyone able to help me with that? Which screws I need to remove and where? Thank you!

  Hi caribman,

  As much as I know the ODD of replacement is not so easy. The drive is secured by a screw and to remove this screw, you need to remove the keyboard and the other parties as well.

  In my opinion, this should be done by a technician of laptop because it s a delicate procedure. It is not as easy as on the desktop, so I would contact a professional help

• You are looking for an internal DVD drive for a Satellite Pro A40

  Hello

  I'm looking for an internal DVD burner for a model Satellite Pro A40 2.88 Celeron with a currently installed CD-RW/DVD-Rom. My mother is the owner of this laptop and I want to upgrade the drive for her.

  Does anyone here know of any number of model of the DVD-RW/CD-RW/DVD-Rom that is compatible with this model.

  I want the drive to function as a DVD-Rom/CD-RW also because I do not want to lose these features. Swap the bezel above if necessary isn't a problem for me.

  Thank you

  Hello
  For this particular model, I could not find another A40 Pro which has a DVD - RW, only DVD ROM. I also suggest to buy an external DVD - RW writer because an internal hard drive will cost much more. Probably triple what external there. External, you can find for about 50 but internal will cost at least about 90 more taxes. I'm sure it is internal that correspond to this machine, but at the moment I don't have the time to research each compatible model search of the car, it's why I suggest an external drive. I hope this helps.

• Re: Satellite A100-692 - how to replace the CD/DVD drive?

  Hello

  the device DVD/combined my A100-692 is damaged and I want to replace it.
  I found no still no guide how to replace the unit.

  Is there something available?

  Thanks in advance!

  Hello!

  AFAIK, you must remove the keyboard first, before you can replace the CD/DVD drive. Remove the screws on the lower side, and then you can push the disc if you have replaced the keyboard.
  It seems to be a bit tricky

  Maybe you should ask a technician for laptop to help. They can replace the CD/DVD drive for you.

  Good bye

• Internal DVD drive for Aspire V 15 Nitro (VN7 - 572 G-573E)

  Hello

  I bought the Acer (see topic) a few months ago and now decided to get an internal DVD player to this laptop. I know how to take the dummy/fake hunting, but I noticed that the shape of the lid is rare, so I can't buy a DVD player only from some store IT, as far as I understand. It would leave a significant opening to the lower cover of the laptop. The cover cannot be moved from the fake, is a permanent part of the plastic Assembly.

  Where can I buy a DVD player to my Acer? Acer is the only person who can provide, and if it is, how do I get the part? Online store didn't have it.

  Please provide accurate information to the customer in Finland. I noticed that the Acer Web site takes me quite quickly to the site of Acer Sweden, in Swedish. Not happy, but maybe I'll manage it from there if I know exactly how to proceed. If there is no customer of Acer in Finland of course service.

  If this disc shaped can be bought elsewhere, I'd appreciate this kind of unofficial info as well.

  Thanks for your help!

  Hello

  The reference numbers of the ODD (support, screw, ODD unit, bezel) modules are:

• How to unlock my cd/dvd drive

  my laptop crashed after a wave of lightning.  Everythings fine now except that my cd/dvd drive is locked. How can I solve the problem?

  Hello

  Follow these steps and use a paper clip to open the drawer

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  http://www.ehow.com/how_2324439_eject-stuck-DVDCD-drive.html

  so try these fixes

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Windows 7 professional XP Mode - does not recognize external USB drives or internal DVD drive

  I recently bought a new Toshiba laptop and ordered computer configured with Windows 7 Professional that I can use the XP mode for some older programs.  Virtual Mode and XP mode work well, but the computer will not recognize the USB external storage drives or internal DVD player.  This prevent me to save and transfer any file I'm working on in XP mode.  Anyone know what I have to do to make the computer recognize USB drives and DVD drive internal when I'm running in XP mode?  Thank you!!

  Hello David,.

  Thanks for the quick response.

  Yes, it's a Microsoft Product, but there specific departments assigned to the people where they have more expertise, this is the reason why we have asked you to post your query in the TechNet where this issue is very discussed.

  Hope this information helps.

• How to access the cd/dvd drive to replace?

  I need to replace the cd/dvd drive and cannot find a way to access it after unscrewing the back - all of the panel does not seem to take off.  Thank you!

  Here is your manual:

  Manual

  Page 58

• How to replace the internal hard drive and continue with existing Time Machine backups

  I have a time Machine airport TB 3 attached to the Ethernet port on my mid-2010 MacBook Pro 7.1. It has a 1 TB internal SSD I want to use Carbon Copy Cloner to a 2 TB OWC drive. The last time I did it, I had to start my Time Machine backups.

  
  

  Is it possible to find 1 the UUID the new SSD, and 2-implementation to date, some sort of Time Machine (perhaps with TMUTIL) 3 information - should allow continuity with the existing backups?

  
  

  T hank you

  I've not had to do this, but a lot of articles about it.

  OS X Yosemite: If you want a new Mac "inherit" your backup history

  http://www.creativetechsupport.com/help/it/install/TimeMachine-inherit.html

  http://pondini.org/TM/B5.html

  If you clone a drive, migrating from an old record, etc., these articles should give you an overview. Special attention to the second article on combining a new drive for a TM backup.

• Portege M700 - DVD drive fails during the recording of discs

  Hello

  I tried the Disc Creator that came pre-installed and also Nero 9.2.6.0. All this on Vista 32 bit.

  The latter seems to have no idea about the problem, as it says smething like unknown failure.

  The creator of disc mentions error code 380381-26-BF040304.

  The problem occurs only at the beginning, I tried with three discs, so I don't think that the disks are the problem. In any case, they are DVD + R DL Verbatim and support up to 8 x, while the recorder goes only up to 4 x for the double layer, so I think I'm ok.

  My suspicion is that maybe the firmware in the DVD version needs update... He mentions Hw 1.00, 1.10 Fw. Other manufacturers of laptop as offer updated firmware DVD for her, but I couldn't find one of TOSHIBA.

  Any ideas?

  See you soon

  Hello

  There are several disks for Portege M700, they are compatible. Usually in the user manual, you can find a list of supported CD/DVD players they are pre-tested by Toshiba and work correctly.

  If you have any other questions about a new drive, ask the service provider authorized in your country. They can offer you a compatible player.

• Satellite A50-108: how to remove the CD/DVD drive?

  I want to update my CD - RW drive for a dvd burner, but can't get the old drive of the laptop.
  I removed the screw on the underside of the laptop, but it won't come out.

  Do we know if there is any other screws received a way to remove the drive of any help greatly.

  Post edited by: na206

  Hello

  It's very strange that you can not remove the optical drive as DVD - ROM drive Assembly is secured with just a screw on the underside. If the screw is removed, you just pull all of the DVD-ROM drive.

  There is no other screws.

• My internal hard drive fails HP Hardware Diagnostic SMART short self-test

  Model name: p6340f

  Product number: VT527AA-ABA

  Operating system: Windows 7

  Error message:

  The unit has reported the following State: the previous self-test completed having the read element of the test failed.

  The first default LBA value is 5151062 and the failure occurred after that the device was working since 3128 hours under tension.

  Failed (error code: HD521-2W)

  I did not change my system.

  Hard drive: WDC WD10EADS - 65M2BX ATA Device

  Model number: WDC WD10EADS-65M2BX

  Firmware revision: 01.00A01

  My computer seems to work fine.  Is there a way to fix this problem, or it indicates that I need a new hard drive?

  Thank you.

  It is generally an indication that the hard disk has failed or is about to fail. The proposed solution is to backup your important data and replace the disk as soon as possible.