How to display data series changed after each step in labview gui, that is to say after the match point fantasy, after substring etc.

Similar Questions

• How to display date / time in the browser console?

  How to display date / time in the browser console?

  You can set through the Options (gear icon) page in the Web Console (Firefox/tools > Web Developer).
  This applies to the browser console and the Web console.

  • https://developer.Mozilla.org/Tools/Web_Console
  • https://developer.Mozilla.org/Tools/Tools_Toolbox#settings

• How to display data that filled by the user after you send the form?

  Right now I am doing a project on the e-complaint, can someone help me how to view the data that have been filled by the user based on the submitted form which also displays the primary key for the reference of the user.

  Here is my form code:

  <?php
    if(isset($_POST["compSubmit"])){
  
    $category=$_POST['category'];
    $typeDamage=$_POST['typeDamage'];
    $serial=$_POST['serial'];
    $location=$_POST['location'];
    $description=$_POST['description'];
    $name= $_SESSION['sess_nama'];
    $SiD=$_SESSION['sess_sID'];
    $Course= $_SESSION['sess_Course'];
  
  
    $con=mysql_connect('localhost','root','') or die(mysql_error());
    mysql_select_db('kktm') or die("Cannot select DataBase");
  
  
  $sql="INSERT INTO complaint2(Name,ID,Department_Course,Category,Type_Damage,Serial,Location,Data_Time,Complaint,Status,Report) 
  VALUES ('$name','$SiD','$Course','$category','$typeDamage','$serial','$location',NOW(),'$description','Pending','')";
    $result=mysql_query($sql);
    }else {
    echo "Fail to Complaint!";
    }
    ?>
  

  I hope someone can help me with this...

  Thank you.

  You use the deprecated mysql connection. YOU NEED to SWITCH TO MYSQLI OR PDO.

  You also do not have a data validation and remediation. You really need to.

  But to answer your question, you can add the following code:

  ECHO '.

  ";
  
  print_r($_POST);
  echo "

  ";

• HOW TO READ DATA SERIES WITH SYNCHRONIZATION

  I have a question about my application for the acquisition of data in series. In my application, I use visa read to acquire data series sent by an inertial measurement unit. When I first put the sensor, it sends data in the following one time format:

  1:0 x 8011 header followed 1 data word for Adler, 1 data word (each 16-bit word data).

  and the sensor then starts sending the data in the following format:

  2:0x7FFF header followed 1 data word for checksum, 9 data word (each 16-bit word data).

  (Note: checksum is defined as a 2s - complement of the sum of 16 bits of the rest of the entire message)

  In my application, to simplify the problem, I use a wait function to ensure that the initial data header 1 tag is sent. Then I start reading using VISA Read 20 bytes (header 2 more words of associated data are 20 bytes), as I'm mainly interested in the data header 2 tag words.

  However, when I do this, the data that I get do not begin by 7FFF character and, accordingly, my 20-byte data cannot be parsed correctly. My question is how can I do the "VISA read" block read the serial port when data are preceded by '7FFF '.  Once I have solve this part, my strategy will be assembled data read 20 bytes (including the header of 4 bytes) and analyzed accordingly.

  Another question, I wonder if you can tell me how to use the given checksum it is defined as "a s 2 - complement of the sum of 16 bits of the rest of the entire message". Note the data that contains the header 1 tag is 1 post.

  I would appreciate if you have responded to my request.

  Thank you!

  Serdar

  
  

• How to display data on the screen and save the data in a file at the same time?

  The code can display acceleration on the screen of the playbook.

  But, when fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ") runs, debug displays no source available.

  ??

  Does anyone know how to solve the problem, which writes data to a file?

  The code is below.

  /*
  * Copyright (c) 2011 Research In Motion Limited.
  *
  Licensed under the Apache License, Version 2.0 (the "license");
  * You may not use this file except in compliance with the license.
  * You can get a copy of the license at
  *
  www.Apache.org/licenses/license-2.0
  *
  * Unless required by the applicable law or agreement written, software
  * distributed under the license is distributed on an "AS IS" BASIS.
  * WITHOUT WARRANTIES OR CONDITIONS of ANY KIND, express or implied.
  * See the license for the specific language governing permissions and
  * limitations under the license.
  */

  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include

  /**
  The milliseconds between the accelerometer readings. It's the same thing
  * rate in which the accelerometer data will be updated
  * material. The update of material rate is below to help
  * accelerometer_set_update_frequency (FREQ_40_HZ).
  */
  public static const int ACCELEROMETER_MAX_POLL_INTERVAL = 25;

  public static screen_context_t screen_ctx;
  public static screen_window_t screen_win;
  dialog_instance_t main_dialog = 0;

  paused int = 0;

  The forces of the accelerometer
  float force_x, force_y, force_z;

  file elements
  int _logcounter = 0;
  FullName Char [256];
  FILE * f;

  /**
  * Use the PID to set the id of Group window.
  */
  public static char
  get_window_group_id()
  {
  public static char s_window_group_id [16] = "";
  If (s_window_group_id [0] == '\0') {}
  snprintf (s_window_group_id, sizeof (s_window_group_id), "%d", getpid());
  }
  Return s_window_group_id;
  }

  /**
  * Set up a basic screen, so that the browser will be
  * Send window state events when the State of the window changes.
  *
  * @return @c EXIT_SUCCESS or EXIT_FAILURE @c
  */
  public static int
  setup_screen()
  {
  If (screen_create_context (& screen_ctx, SCREEN_APPLICATION_CONTEXT)! = 0) {}
  Return EXIT_FAILURE;
  }
  If (screen_create_window (& screen_win, screen_ctx)! = 0) {}
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }
  use of int = SCREEN_USAGE_NATIVE;
  If (screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_USAGE, & use)! = 0) goto fail;
  If (screen_create_window_buffers (screen_win, 1)! = 0) goto fail;
  If (screen_create_window_group (screen_win, get_window_group_id())! = 0) goto fail;
  buff screen_buffer_t;
  If (screen_get_window_property_pv (screen_win, SCREEN_PROPERTY_RENDER_BUFFERS, (void *) & buff)! = 0) goto fail;
  buffer_size int [2];
  If (screen_get_buffer_property_iv (buff, SCREEN_PROPERTY_BUFFER_SIZE, buffer_size)! = 0) goto fail;
  int attributes [1] = {SCREEN_BLIT_END};
  If (screen_fill (screen_ctx, chamois, attributes)! = 0) goto fail;
  int dirty_rects [4] = {0, 0, buffer_size [0], buffer_size [1]};
  If (screen_post_window (screen_win, buff, 1, (const int *) dirty_rects, 0)! = 0) goto fail;
  Return EXIT_SUCCESS;
  in case of failure:
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }

  /**
  * Rotates the screen at the specified angle.
  *
  @param angle angle to rotate the screen.  Must be 0, 90, 180 or 270.
  *
  * @return @c EXIT_SUCCESS on success, to another @c EXIT_FAILURE
  */
  public static int
  rotate_screen (int angle)
  {
  If ((angle! = 0) & (angle! = 90) & (angle! = 180) & (angle! = 270)) {}
  fprintf (stderr, "Invalid Angle\n");
  Return EXIT_FAILURE;
  }
  int rc;
  int rotation;
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, & rotation);
  If (rc! = 0) {}
  fprintf (stderr, "error getting the window of the screen rotation: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int size [2];
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error getting size memory buffer window screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int temp;
  switch (angle - rotation) {}
  case - 270:
  case - 90:
  decision 90:
  case 270:
  Temp = size [0];
  size [0] = size [1];
  size [1] = temp;
  break;
  by default:
  break;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, &angle);)
  If (rc! = 0) {}
  fprintf (stderr, "screen rotation window for parameter error: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SOURCE_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window buffer size of the screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  Return EXIT_SUCCESS;
  }

  /**
  To manage an event of navigator.
  *
  * @return @c the value true if the application should shut down, another fake.
  */
  public static bool
  handle_navigator_event(bps_event_t *Event)
  {
  bool should_exit = false;
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_EXIT:
  should_exit = true;
  break;
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true);
  break;
  case NAVIGATOR_ORIENTATION:
  {
  int angle = navigator_event_get_orientation_angle (event);
  If (rotate_screen (angle) == EXIT_FAILURE) {}
  should_exit = true;
  }
  navigator_done_orientation (Event);
  break;
  }
  }
  Return should_exit;
  }
  /**
  * Display an alert dialog box that contains the location data.
  */
  public static void
  show_main_dialog()
  {
  If {(main_dialog)
  return;
  }
  dialog_create_alert(&main_dialog);
  dialog_set_alert_message_text (main_dialog, "Acceleration to first fix");
  dialog_set_size (main_dialog, DIALOG_SIZE_FULL);
  dialog_set_group_id (main_dialog, get_window_group_id());
  dialog_set_cancel_required (main_dialog, true);
  dialog_show (main_dialog);
  }

  /**
  * Displays geolocation data in the main dialog box.
  */
  public static void
  display_acceleration_data (float force_x, float force_y, float force_z) {}
  char buf [1024];
  snprintf (buf, sizeof buf,
  "\tX: m\n % 7.3.f.
  "\tY: m\n % 7.3.f.
  "\tZ: m\n % 7.3.f."
  force_x, force_y, force_z);
  dialog_set_alert_message_text (main_dialog, buf);
  dialog_update (main_dialog);
  }

  void createafile() {}
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  {if(f==null)}
  file does not exist
  f = fopen (fullname, "r");
  {while(f!=null)}
  file exists
  fclose (f);
  ++ _logcounter;
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  f = fopen (fullname, "r");
  }
  }
  }

  write data to the file
  void writedataintofile() {}
  f = fopen (fullname, "w");
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  fclose (f);
  }

  /**
  * A sample application shows the native APIs of BlackBerry for accelerometer.
  * The example initializes and reads the accelerometer periodically until one
  * NAVIGATOR_EXIT event is received.
  Enforcement also tuned to changes status window in the browser so that
  * It can stop reading the accelerometer when the application is no longer visible.
  */
  int main (int argc, char * argv {})
  bool exit_application = false;
  /*
  * Until we can listen for events from the BlackBerry Tablet OS platform
  * services, we need to initialize the BPS infrastructure
  */
  bps_initialize();
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event). This allows to
  * us to clean up resources in the application.
  */
  navigator_request_events (0);
  dialog_request_events (0);
  /*
  * Initialize the screen so that the Windows Id is correctly set, to allow
  * dialogs to display.
  */
  If (setup_screen()! = EXIT_SUCCESS) {}
  fprintf (stderr, "Failed to initialize the screen.");
  Exit (-1);
  }
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  *
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event).
  *
  * We ask events of dialogue so that we can be notified when the service of dialogue
  * answers to our queries/requests.
  */
  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "error asking navigator events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  If (BPS_SUCCESS! = dialog_request_events (0)) {}
  fprintf (stderr, "error asking dialog events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  /*
  * Create and display the dialog box that displays the data from the accelerometer.
  */
  show_main_dialog();
  /*
  Prior to initialize the accelerometer function, we must ensure the unit
  * takes in charge
  */
  If (sensor_is_supported (SENSOR_TYPE_ACCELEROMETER)) {}
  /*
  * If the device does not support the accelerometer so warn the user,.
  * clean in and out
  */
  public static const int SENSOR_RATE = 40;
  sensor_set_rate (SENSOR_TYPE_ACCELEROMETER, SENSOR_RATE);
  sensor_request_events (SENSOR_TYPE_ACCELEROMETER);

  }
  /*
  * Initialize the accelerometer setting the rate at which the
  * accelerometer values will be updated material
  */
  accelerometer_set_update_frequency (FREQ_40_HZ);

  /*
  Treat browser events and take the accelerometer readings periodically
  * until we receive a NAVIGATOR_EXIT event.
  */
  createafile();
  f = fopen (fullname, "w");

  While (! exit_application) {}
  /*
  * By setting the timeout to bps_get_event to ACCELEROMETER_MAX_POLL_INTERVAL,
  * We assign the maximum duration (in millis) who will wait before
  * release so that we can take a reading of the accelerometer.
  */
  bps_event_t * event = NULL;
  bps_get_event (& event, ACCELEROMETER_MAX_POLL_INTERVAL);

  If {(event)
  If (bps_event_get_domain (event) is {sensor_get_domain()})
  /*
  * We woke up. See if we are in the paused state. If not,
  take a reading of the accelerometer
  */
  If (! pause) {}
  sensor_event_get_xyz (event, & force_x, & force_y, & force_z);
  display_acceleration_data (force_x, force_y, force_z);
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  } //paused
  }
  / * If this is an event of the dialog box, determine the response code and handle
  * the event accordingly.
  */
  {ElseIf (bps_event_get_domain (event) == dialog_get_domain() {)}
  ;
  }
  /*
  * If it's a NAVIGATOR_EXIT event and then set the exit_application
  * indicator so that the application stops processing events, clean and
  * output.
  */
  {ElseIf (bps_event_get_domain (event) == navigator_get_domain() {)}
  exit_application = handle_navigator_event (event);
  }
  } //if event
  } //while
  /*
  * Destroy the dialog box, if it exists.
  */
  If {(main_dialog)
  dialog_destroy (main_dialog);
  }

  fclose (f);

  /*
  * Clean the infrastructure bps and output
  */
  sensor_stop_events (SENSOR_TYPE_ACCELEROMETER);
  bps_shutdown();
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  return 0;
  } //main

  Hello

  As I said on your other thread:

  In order to write in the shared directory/documents, your application should request action "access_shared" and it must be granted by the user. Make sure you have

  access_shared

  in your bar - descriptor.xml.

  Also note that the shared documents folder may not be the best place to write the application log data. There is one connects / in the sandbox to this effect, or the application directory data / directory if the information should be persisted. The documents/shared/folder is designed for documents that the user creates or interacts with.

  HTH,

  Christian

• How to display date information in a data log table

  Hello

  I want to display data during the data acquisition process. How can I add the time stamp as one of the column in the Table of 'results' located bottom left of the sample code?

  Thank you

  Ryan

  Here is an example of the use of ordinary table instead of the express. You will need to convert your dynamic data to a scalar with the dynamic data conversion function.

• How to display data when the page loads

  I use JDeveloper/Oracle ADF 11.1.2.3.0.
  
  I have a jsf with a table page that was built by a named query. I chose the research with the table option when you drag the query named on the page.
  
  The named query uses a connection variable which is not set with the loading of the page. Therefore, no data is display even if the query is executed.
  
  But, I can then click on the button Search and display of the data.
  
  I tried to set the default value of the variable binding '%' in the OV, but that did not work.
  
  So, is it possible that I can get all the data displayed when the page is loaded. Perhaps by the calling program the by clicking the search button?
  
  Thanks for your help.

  Open the criteria to view that you defined in the t for your group, "indication of interface user" tab and check the box 'automatically interrogate. "

  Timo

• How to display data from the emp table?

  Hi everyone, this is my first post in this portal. I want to display the details of the table emp... for this I use this SQL statement.
  
  Select * from emp where mgr = nvl(:mgr,mgr);
  
  When I give the entry as 7698 it shows the matching records... and also when I don't give any input then it shows all the records except the Archbishop with null values.
  
  (1) I want to display all the records when I do not give any input, including null values
  (2) I want to display all the records that a Bishop is null
  
  Is it possible to integrate in order to include all these in a single query.

  Hello

  937440 wrote:
  Hi everyone, this is my first post in this portal.

  Welcome to the forum!
  Don't forget to read the forum FAQ {message identifier: = 9360002}

  I want to display the details of the table emp... for this I use this SQL statement.

  Select * from emp where mgr = nvl(:mgr,mgr);

  When I give the entry as 7698 it shows the matching records... and also when I don't give any input then it shows all the records except the Archbishop with null values.

  (1) I want to display all the records when I do not give any input, including null values
  (2) I want to display all the records that a Bishop is null

  Is it possible to integrate in order to include all these in a single query.

  It's a little unsure what you're asking.
  The following query always includes the lines where mgr is NULL and when the binding variable: mgr is NULL, it displays all the lines:

  SELECT  *
  FROM     emp
  WHERE     LNNVL (mgr != :mgr)
  ;
  

  In other words, when: 7698 = mgr, it displays 6 rows and when: mgr is NULL, it displays 14 rows (assuming you are using the table provided by Oracle scott.emp).

  The following query includes lines where Bishop is ZERO only when the binding variable: mgr is NULL, in which case it shows all lines:

  SELECT     *
  FROM     emp
  WHERE     :mgr     = mgr
  OR       :mgr       IS NULL
  ;
  

  When: mgr = 7698, this will display 5 rows and when: mgr is NULL, it displays 14 rows.

  The following query includes lines where Bishop is ZERO only when the link variab; e: mgr is NULL, in which case it shows only those rows where mgr is NULL. In other words, it treats NULL as a value:

  SELECT     *
  FROM     emp
  WHERE     DECODE ( mgr
              , :mgr, 'OK'
              )     = 'OK'
  ;
  

  When: mgr = 7698, this will display 5 rows and when: mgr is NULL, it displays 1 row.

• How can pass data to a version of exe with LabVIEW?

  I have an application that allows to launch one or more instances of the same executable using "system Exec' VI, false option" wait until the end? My problem is I want to transmit a different value for each instance, to an input parameter. Something like that if you launch notpad.exe, followed by a file name. The executable file is a generation of LabVIEW application too.

  How can I do this?

  Best regards

  Passing parameters to the command line in a LabVIEW application is actually quite simple.

  There are 2 things you need to do:

  -Change the specification to build exe of LabVIEW to move all command line arguments to the application

  -Read the property App.Args that returns an array of strings for the parameters - the first parameter is always LabVIEW.exe.

  For an example:

  

  Here, I've read the arguments ignore the LabVIEW.exe and then read a path as the first argument and the check, it exists and there is also an option '-choose ' parameter that determines whether to show the user interface.

  Details are here: http://digital.ni.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364

• How can I fix error "changed default location for Windows Update files" that Fit-It notes several times, but does not solve?

  Using Windows XP Home Edition SP3, IE8, and Firefox 13.

  Used several times to install and MS Fit-It tool to try to fix Windows Update so that will download the updates of high priority.  4 four security updates not always settle.  Fix - It tool shows that "one or more Windows Update are configured incorrectly" and that it has been fixed (run 10 times).  He also pointed out "where Windows Update stores data has changed and needs to be repaired", but offers no solutions to fix this problem.  Cannot find any reference to this in the KB or MS answers.

  Is it possible to repair this problem and it will make a difference by allowing for installing security updates?  I talked to Ms. telephone and e-mail do not install security updates, but they say I have to pay $99 to get this issue fixed MS Update.  I thought I read that security patches are supposed to be supported without charge.

  Any new advice or techniques for solving this would be appreciated.

  Hello RickH999,

  Follow the steps in the article to reset the Windows update components and check if the problem persists.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps.

• How do I step manually in code that uses a structure of the event, when I want to select a particular event?

  I use an architecture of producer/consumer for an application with a structure of the event in the upper loop. Events are triggered by the user from the control panel using Boolean switches that are "change when you press on" and "release switch. My question is how can I manually step through the code using various events? It doesn't matter what I'm still not in the same event.

  Thank you.

  You can view the code? Is what event still enter? I did have problems step by step in code that uses a structure of the event. You must be patient, but because the application is slowed down a bit and it can take a while to get into the case of the specific event depending on what events you deal. Usually, I place a breakpoint in the case I am interested and run the application as usual. Once I hit the breakpoint is when I turn on highlighting of execution.

• How can I insert instructions/text in a PDF form text field that can be typed by the end user?

  How can I insert instructions/text into a text form field that can be typed by the end user? As the screenshot attached.

  I already have a PDF (not created by me) I have to edit but cannot work out how to enter into new fields of text instructions, I create. I tried to do in InDesign, but the text gets just covered by the blue shape box when you view the final PDF file.

  

  Follow the instructions as default value for the field and then reset the form.

  See also: is there a way to add instructional text to my text field that disappears when you click on? (PDF Forms)

• How to: display "last configuration change.

  How can I get my routers to display:

  "The last configuration change" and

  "configuration change since...". »

  and if possible I can trap on these?

  1720 = 12.2 IOS

  Thank you in advance,

  Bart

  To get these displays the router must make sure what date and time is. The best way to do this is to run NTP and learn the time from an NTP server. An alternative is to use the clock control to set time.

  When the router has a time that authoritative display you want is automatic.

• How to display data in a non-databound table?

  Hello
  
  Not sure, it I'm missing something here. I want to display 4 outputText fields on the same line a top of my page with each spaced and the latter always display in the top right of the page.
  
  After messing around with spacers and inline style I think now likely to agree - alignments table positions the reason if the column values are different, then he sticks the last column in different X - this last column must always appear in the corner of the screen.
  
  Is the best way to achieve the above by a table?
  
  My link columns are already on the page, so I don't need to link to a new iterator.
  
  I tried to create a table and dropping in my columns, but nothing outputText doesn't show. If I create a new table and just drag a the pallette outputText inside it shows either!
  
  Why didn't show in the non-databound table?
  
  see you soon

  How about using a panelStretchLayout then put a component in the end section, and one horizontal panel with the other three in the Center.

• How to display data in an interactive report on the form field?

  Hello
  
  I've created an interactive report with its form (goal to create and edit).
  Then, I created a new project with its early date and email id that is assigned to the project.
  When I clicked on the edit button, it opens the edit form and displays the same date, I entered but email id is not displayed.
  Instead, it shows the default value of the e-mail ID LOV, which is "- select Email ID -"
  How can I view the identification of email that I entered?
  
  Thank you
  Guy

  Hello Guy,.

  To discuss your design: why not store the PM_PERSON ID in the PROJECT table? Now, you store addresses several times (in PM_PERSON and in many PROJECT files), what happens if the email address change... (purely hypothetical, of course)...
  And create a foreign key between the PROJECTS and PM_PERSON also...

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)