How to display the reminder Message icon?

Similar Questions

• How to display the success Message on the left side of the screen

  I have a message for success of the process after the process of ApplyMRU * #MRU_COUNT # line (s) update *. By default, this message is displayed in the center of the screen. I want to show this message to the left of the screen.
  
  I use APEX 4.0; Sand theme - 10. I tried to change the position of success message alignment in the Page template - level tabs, HTML Body section. But I'm not having any luck.
  
  Someone know how to change/replace the default position for the success message?
  
  Thank you

  Hello DP,.

  Try this...

  Thank you
  Machaan

• How to display the alarm message for a scheduled task in Task Scheduler

  Original title: title of alarm appears not

  When I create an alarm (in the Task Scheduler) I give this particular alarm a name (example: time to pick up the aunt Martha). How can I make this name display when the alarm goes off?

  Hello

  1. click on start, type Task Scheduler and press enter

  2. in the section actions in the right pane, click create basic task

  3 type the task name , and then click Next

  4. Select when starting the task and click Next

  5. now, select the start and end time and click Next

  6. now, select display a message as the action to perform, and then click Next

  7. now, type a message to display and click Next and click Finish.

• How to display the error messages from sql/pls call

  Hello

  How can I display error messages from pl/sql calls on application pages?

  Current situation:

  If I specify "Error message" in the process - well, that's what I'm going to get on the page.

  What I want:

  I would like to have the specified aka "user friendly" message with the actual pl/sql routine. so it helps me to understand where the error occurred.

  Hi AZZ.

  AZZ says:

  How can I display error messages from pl/sql calls on application pages?

  Current situation:

  If I specify "Error message" in the process - well, that's what I'm going to get on the page.

  What I want:

  I would like to have the specified aka "user friendly" message with the actual pl/sql routine. so it helps me to understand where the error occurred.

  Yes, agree with orpheus4192. Use the APEX_ERROR. ADD_ERROR API.

  Reference:

  • Re: Re: error in the processing of the page management
  • https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/apex_error.htm#AEAPI2217 (APEX 5.0)
  • http://docs.Oracle.com/CD/E37097_01/doc.42/e35127/apex_error.htm#AEAPI2217 (APEX 4.2)

  Kind regards

  Kiran

• How to display the error message by supporting the bean class - Jdev 10.1.3.4

  Hi people.
  I have a page with a form of adf and some text entry fields
  A text entry field is based on a transitional attribute.
  I created a validation in a bean class of support to do some calculations. If the user type a wrong number in this field, I need to validate the number in my support bean method (which is ok)
  and show a validation error, like this validations of EO. Is this possible?
  Willian thanks

  Hello

  Yes, it is, try something like the following:

  FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_ERROR, "some message summary", "some message detail");
  FacesContext.getCurrentInstance().addMessage(null, message); // Null for global message
  

  Kind regards

  ~ Simon

• How to display the speaker icon in the taskbar in windows 7?

  How to display the "speaker" of the taskbar icon in windows 7?

  Thank you

  concerning

  Jamal

  Hi Jamal

  1. right click on the taskbar, and then select Properties.

  In the Notification area section, click the Customize button.

  2. in the Configuration window, find the Volume icon.

  The Drop Down Menu to select the icon lounge and Notifications.

  3. If you don't see the Volume icon, click system icons activate or deactivate the link at the bottom of the window.

  Find the Volume icon and select enabled in the menu dropdown.

  Repeat step 2.

  Let us know the results.

  Concerning

• How to disable the annoying message "Printer cartridges no HP installed" on Windows 7?

  How to disable the annoying message "Printer cartridges no HP installed" on Windows 7? I have a HP Officejet 6500 has more and there is a way to disable those annoying pop ups. First of all, why HP can't fix their software to display only 1 message. If I turn on my printer, I get about 5 popups when the 3-minute delay. Is - this embarrassing? You bet, I do not turn off my printer more to avoid these messages. There must be a registry entry that I can delete gladly. Ideas? If you are an employee of HP, please do not give the Conference on "genuine cartridges" and how you take care of your printer. I've had my printer for 7 years and never had a problem with cartridges not HP. They are all made in China.

  This isn't a bad idea, but this does not resolve the issue. There are many complaints from customers about these annoying messages. All HP needs to do is to say to their developers to add a function to disable this feature. What is a marketing thing? Yes, it's a boring marketing question that should really be fixed. It's like Windows display constantly that your device drivers are not fully tested. Of course, when a customer buys a product at a lower price, they take this risk. I hate to be notified 365 days a year that my cartridges are not authentic.

• How to display the language bar and bring back the language switch to the taskbar?

  How to display the language bar and bring back the language switch to the taskbar?

  How to display the language bar and bring back the language switch to the taskbar?

  Hello

  According to the description, I understand that you do not want to display the language bar.

  I would like to know some information.

  1. You hide the language bar, or missing?

  I suggest you try the steps mentioned below and check.

  1. Go to the control panel.

  2. Click on clock, language and region.

  3. Region and language.

  4. Keyboard and language tab.

  5. Change keyboards button.

  6. Language bar tab.

  Then simply change the parameters of language bar hidden in the "embedded in the taskbar" and check.

  Here, you can also check the option in the check box for display icons of language in addition to the taskbar bar.

   

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Unable to display the error message using the controller extension

  Hello

  I am trying to extend standard iproc CheckoutDistsCO. I have to display the error message when the quantity entered is '0 '. So I wrote logical when you click on the apply"" button. I created an extension CheckoutDistsCOEx & written logic here... but I am able to see messages in the log file, but no error message on screen.

  After having many forums I place super.processFormRequest (pageContext, webBean); at the end. It start always error message.

  Standard CheckoutDistsCO has a logic in the button apply. I think it is the substitution of the extension code... How can I fix? Pointers appreciated please

  package xxtr.oracle.apps.icx.por.req.webui;

  Import oracle.apps.fnd.framework.OAApplicationModule;

  Import oracle.apps.fnd.framework.OAException;

  Import oracle.apps.fnd.framework.OAFwkConstants;

  Import oracle.apps.fnd.framework.OARow;

  Import oracle.apps.fnd.framework.OAViewObject;

  Import oracle.apps.fnd.framework.webui.OAPageContext;

  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;

  Import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;

  Import oracle.apps.icx.por.req.webui.CheckoutDistsCO;

  Import oracle.jbo.domain.Number;

  java.lang.String import;

  public class CheckoutDistsCOEx

  extends from {CheckoutDistsCO}

  {} public processRequest Sub (pageContext OAPageContext, OAWebBean webBean)

  super.processRequest (pageContext, webBean);

  }

  {public processFormRequest (pageContext OAPageContext, OAWebBean webBean) Sub

  super.processFormRequest (pageContext, webBean);

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  pageContext.writeDiagnostics (this, 'seized in PFR method", OAFwkConstants.STATEMENT);

  If (pageContext.getParameter ("Return")! = null) {}

  String applyevent = pageContext.getParameter (EVENT_PARAM);

  If (applyevent.equalsIgnoreCase ("return")) {}

  pageContext.writeDiagnostics (this, "clicked the Apply-back button" + applyevent, OAFwkConstants.STATEMENT ");

  OAException message = new OAException ("clicked on Apply-back put the message in the dialog box" + applyevent, OAException.INFORMATION);

  pageContext.putDialogMessage (message);

  OAViewObject poreqdistvo = (OAViewObject) am.findViewObject ("PoReqDistributionsVO");

  pageContext.writeDiagnostics (this, "display object = >" + poreqdistvo, OAFwkConstants.STATEMENT);

  OAAdvancedTableBean xxProjectDistsAdvTable = (OAAdvancedTableBean) webBean.findChildRecursive("ProjectDistsAdvTable");

  Line OARow = (OARow) poreqdistvo.getCurrentRow ();

  If (line! = null) {}

  pageContext.writeDiagnostics (this, "line Found"+ row, OAFwkConstants.STATEMENT);

  Number of xxtrqty = (Number) row.getAttribute ("ReqLineQuantity");

  pageContext.writeDiagnostics (Thi, "get attribute reqlinequantity" + xxtrqty, OAFwkConstants.STATEMENT);

  If (xxtrqty.intValue () == 0) {}

  pageContext.writeDiagnostics (this, "in comparing to 0 xxtrqty" + xxtrqty.intValue (), OAFwkConstants.STATEMENT);

  throw new OAException ("Enter valid amount", OAException.ERROR);

  }

  }

  else {}

  throw new OAException ("no line Found Else", OAException.ERROR);

  }

  }

  else {}

  throw new OAException ("not in"apply button", OAException.ERROR);

  }

  super.processFormRequest (pageContext, webBean);

  }

  }

  Thank you

  TR

  For example, when you comment on the super. PFR, you receive the error message on the right of the screen?

  Can you try this code and paste the debug log.

  public class CheckoutDistsCOEx extends CheckoutDistsCO {
      public void processRequest(OAPageContext pageContext, OAWebBean webBean) {
          super.processRequest(pageContext, webBean);
      }
  
     public void processFormRequest(OAPageContext pageContext, OAWebBean webBean) {
    //super.processFormRequest(pageContext, webBean);
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
          pageContext.writeDiagnostics(this, " ----> Entered into PFR Method", OAFwkConstants.STATEMENT);
          String applyevent = pageContext.getParameter(EVENT_PARAM);
    pageContext.writeDiagnostics(this, " ----> applyevent: " + applyevent, OAFwkConstants.STATEMENT);
          if (applyevent.equalsIgnoreCase("return")){
    pageContext.writeDiagnostics(this, " ----> Inside If", OAFwkConstants.STATEMENT);
              OAViewObject poreqdistvo = (OAViewObject)am.findViewObject("PoReqDistributionsVO");
              OARow row = (OARow)poreqdistvo.getCurrentRow();
    pageContext.writeDiagnostics(this, " ----> row : "+ row, OAFwkConstants.STATEMENT);
              if (row != null) {
    Number xxgesqty = (Number)row.getAttribute("ReqLineQuantity");
    pageContext.writeDiagnostics(this, " ----> xxgesqty : "+ xxgesqty, OAFwkConstants.STATEMENT);
                  if (xxgesqty.intValue() == 0) {
    pageContext.writeDiagnostics(this, " ----> throwing errro : ", OAFwkConstants.STATEMENT);
    throw new OAException("Enter Valid Quantity ",OAException.ERROR);
    }
    }
              else {
    pageContext.writeDiagnostics(this, " ----> No Row Error", OAFwkConstants.STATEMENT);
    throw new OAException("No Row Found Else ",OAException.ERROR);
    }
    }
    pageContext.writeDiagnostics(this, " ----> Calling Super", OAFwkConstants.STATEMENT);
          super.processFormRequest(pageContext, webBean);
      }
  }
  

  See you soon

  AJ

• How to display the language bar in Windows 8?

  How to display the language bar in Windows 8? I have three input languages installed. When I right click on the taskbar, click Toolbars, the language bar does not appear as an option.

  How to display the language bar in Windows 8? I have three input languages installed. When I right click on the taskbar, click Toolbars, the language bar does not appear as an option.

  Hello

  On how to Activate the language in the taskbar . Click here Link 1 or link 2 
  I hope this helps.

  Rafa. M -please click the 'Mark as answer' or 'Useful' button at the top of this message.   Marking a post as answer, or relatively useful, you help others find the answer faster

• How to display the list of all the constraints, triggers, procedures... .etc

  Hello
  How to view a list of all the available constraints, triggers, procedures, functions and packages in a database. And how to view its definition?

  user12222356 wrote:
  Not working is this said sql statement "object"sys"". "" DBA_OBJECTS"does not exist"

  OK, so the problem is that you have not allowed access to any data dictionary table. If you want to be able to view all of the DBA_ * dictionary of data tables, you need the ADMINISTRATOR to grant you the privilege to CHOOSE ANY DICTIONARY.

  In the future, when you post an error message, in addition to displaying the error message, it will be useful if you can get the error number, for example, that is, ORA-xxxxx

  Justin

• How to display custom error message when JAAS authentication fails

  Hi all
  I use JDEV 11 g TP4 and have the following problem:
  
  I have a web application with custom, connection module that is called by the container.
  
  When authentication fails, I take a "javax.security.auth.login.FailedLoginException" with the error in detail inside.
  
  The point is, how to display the exact error on login error page, who transmits container automatically
  
  
  Kind regards
  Krasimir

  We have implemented several custom, but never used connection modules JAZNContextCallback. I think it's depracticed JPS... and pay attention to the point made by Frank that this should be changed to WLS in JDev version coming soon. Even in TP4 there has many parts unfinished of JPS where JAZN is always used but does not not as expected.

  I suggest you only use reminder managers JAAS standard or implementation you container own login module standards in order to support any migration. Unfortunately, the javax.security.auth does not provide reminder to catch the request context.

  You can try to use the new oracle.security.jps.callback.HttpRequestCallback)

  I think it should work even with WLS.

  Kind regards

  PaKo

• How to display the width of the page or the big screen in firefox 11 automatically?

  How to display the width of the page or the big screen in firefox 11 automatically? I know how to Ctrl +, ctrl - and ctrl 0, but is there a way to define 11 firefox to automatically set the page viewing by default "page width" or full screen (F11 not)?
  Help, please. Thank you.

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

• How to display the drop-down list box in MS excel by using labview report generation toolkit? pleasepost code block diagram?

  How to display the drop-down list box in MS excel by using labview report generation toolkit? Please post the block diagram of the code so that I can able to generate from the drop-down list box in excel with the menu drop-down...

  Like this. (edition, use the reference forms instead of the reference to the worksheet)

  Ben64

  

• How to display the list of components in ultiboard 10?

  The DRC report the errors where the components that are no longer in the design have been removed. How to display the list component and then remove them from the netlist to stop this?

  Ultiboard reported missing errors of component (part 'X' is not about design) because the part is always referenced by a net. To fix this, you must remove the part of the net. Following the steps below to remove the part form the net.

  1 tools > Netlist Editor

  2. for each network that the part has been connected to, select the Net (upper-left).

  3. Select the tab of pine trees, select the part and it is the PIN in the dialog box, then click on remove

  The problem is when the part is removed, I see no easy way to determine the threads you need to remove the part of. I entered this as a feature request to make this easier, but as a workaround, you can put part and say Ultiboard what the missing part, then search the net names on the pins and remove the part of these pins

  1 place a piece with a lot of pine trees (for example the part that was removed, or for example through Hole technology > Connectors > SIL & headers > HEADER2X9). When you place the part, make sure that the RefDes matches the RefDes of the part which has been removed.

  2. once the room is placed, you should see rats nest lines that connect the part to the nets.

  3 Zoom on the pins. You should now see the net name on each of the axes. For each of the pins connected, remove it from the net as described above.

  4. remove the part that you placed.