How to distinguish the physical interface and logic (subinterface) interface to the Cisco router/Switch?

Similar Questions

• How to distinguish the figures and characters from a string

  I am looking for a simple way to do this or any built-in subVIs that can do this.

  I have 3 strings "1234c", "ab3dc". 'XYA', I want to identify those who have numbers and to reclaim all of the numbers. So an important step is to distinguish the character numeric and non-numeric characters. How can I do it in Labview with subVIs integrated?

  Thank you

  [0-9] is looking for a number, "+" makes the search for 1 or more of them (it is "greedy", so it will get as many as there are has).  I added a rope in addition to your list to show that the Pattern Match will match only the first instance of a number.  If there's a chance you have data as the last element that you need to run it in a loop.  Decimal string number can also work if a figure is the first character that it finds.

  

• How to connect 2 physical computers and 2 virtual machines?

  Hello!

  This is my first time in the forum and I would like to ask about the network configuration for an installation of 2 physical machines and 2 virtual machines. Each physical computer has a virtual machine (all operating systems is Windows 7 or 8). I don't have a level of advanced network management, but I would like to ask how to resolve a case of example of this configuration? I was wondering for communication between machines and communication examining between 1 machine with the other 3.

  Thanks in advance! If someone has already asked this, please tell me the reference.

  Welcome to the community,

  VMware Player offers 3 configuration settings, bridged, NAT as well under the name Host-Only network. Host-Only can be used if the virtual machine does not require a connection with the exception of the other virtual machines and the host network. NAT is typically used if the virtual machine requires network access, but didn't need to be accessible to the outside. In your case, the possibility of using is connected by a bridge, which will connect seamlessly the virtual machine to the physical network.

  André

• How to distinguish the events within an EventHandler?

  Hi all,

  being a newbe in JavaFX I try to distinguish the different eventtypes.

  I try to produce a MouseEventHandler accepting soe as MOUSE_DRAGGED and MOUSE_PRESSED events

  for the calculation of how mouse took and use it to translate my graphics nodes.

  I still don't really understand what is the correct syntax.

  something like

  If (event.getEventType instanceof MouseEvent.MOUSE_PRESSED ())

  {

  ...

  }

  obviously does not work.

  something like

  switch (event... getEventType())

  {

  case MOUSE_PRESSED:

  ...

  }

  also isn't the right way.

  Is it possible to tell them apart?

  Thank you very much in advance

  Malta

  if (event.getEventType() == MouseEvent.MOUSE_PRESSED) {
  // ...
  }
  

  should work.

  I've never done this, fwiw. I always just save different implementations of listener for different event types:

  node.addEventHandler(MouseEvent.MOUSE_PRESSED, new EventHandler() {
       @Override
       public void handle(MouseEvent event) {
            // handle mouse pressed
       }
  });
  
  node.addEventHandler(MouseEvent.MOUSE_RELEASED, new EventHandler() {
       @Override
       public void handle(MouseEvent event) {
            // handle mouse released
       }
  });
  

  In Java 8 this will get much less verbose (using lambda expressions).

• How to distinguish the form as textfield element

  I use the following script to disable all elements on the page:

  for (var nPageCount = 0; nPageCount < xfa.host.numPages; nPageCount ++) {}
  

  var oFields = xfa.layout.pageContent (nPageCount, "field");
  var nNodesLength = oFields.length;
  Set the field property.
  for (var nNodeCount = 0; nNodeCount < nNodesLength; nNodeCount ++) {}
  If (oFields.item (nNodeCount) .access! = "readOnly")
  {
  oFields.item (nNodeCount) .access = "readOnly";
  }
  }

  I have a requirement where I have to disable only the textfields. So, can someone please help me with how to get the field of a particular field type.

  Thank you.

  Paul approach is good. But it requires the developer to follow a specific naming standard.

  Here is my code that makes the TextFields readOnly fields regardless of the name of the field.

  for (var nPageCount = 0; nPageCount < xfa.host.numPages; nPageCount++)
      {
           var oFields = xfa.layout.pageContent(nPageCount, "field");
           var nNodesLength = oFields.length;
  
           for (var nNodeCount = 0; nNodeCount < nNodesLength; nNodeCount++)
           {
                 var ref = oFields.item(nNodeCount).getElement("ui");
  
                if(ref.nodes.item(0).className=="textEdit")                    // If the field is a TextBox, then proceed
                {
                     if(oFields.item(nNodeCount).access != "readOnly")
                     {
                         // Set the field property.
                          oFields.item(nNodeCount).access = "readOnly";
                     }
                }
           }
      }
  

  I would like to know if you want...

  Nith

• How people at the genius bars switch sim cards?

  I'm confused...

  What do you mean how they spend them? Ask yourself how they access the SIM card in the phone? Or you ask something else? Just switching SIM card requires you to open the SIM card tray, remove the old SIM, insert the new, close the drawer.

  What type of device you are referring to and explain if I've not understood exactly what you ask.

• Internal and external customers see certificate of Cisco router, NOT Exchange SSL certificate

  Cisco 876 Integrated Services router (ISR)
  Exchange Server 2010 SP1

  Customer: 2013 Outlook, OWA, ActiveSync WP7/WP8 (?)

  Put us in place a new Cisco ISR. Almost everything works fine, with a few exceptions. Exchange e-mail stopped altogether for several days until I realized that I needed to redirect the ports, SMTP, HTTP, and HTTPS, by external to the Exchange Server. Now, mail flow is fine, but...

  Every time I start Outlook, I get a certificate error. When I look at the certificate in the error popup, it points actually to certificate self-signed Cisco router. When we try to use the Windows phones, they get a "certificate error" and direct the user to the network administrator. Even with OWA: a certificate error, even if it can be "accepted" / overridden.

  Each customer can still work, with the exception of Windows phones. In Outlook and OWA, mail is always be sent and received, but must be accepted manually that the certificate is wrong before the customer takes care, and then it takes a little longer to load.

  Any ideas?

  I did "" port forwarding on the pots of 25, 80 and 443. Again, I did it yesterday and now mail seems to flow, whereas before, even if we could enter the client with Certificate error, message not be received. (There was also a problem with mail however not passed, but that was due to our mail relay provider and was set yesterday as well...)

  Everything worked fine with the previous router (obviously). It was a high-end, the level of consumption Fritz! Box commonly used in Germany. I also had to allow ports through this box is not unlike using the nat ip inside static commands on the 876, but I don't know what he could have let his own or why SRI is the Exchange Server application SSL certificate hijacking.

  Thanks in advance for any help.

  jeremyNLSO
  CCNA Routing & Switching, CCNA security
  MCITP, MCTS
  Berlin, Germany

  If we have actually figured this out today. The internal DHCP Server distributing the a DNS Server public as well as the internal DNS. The internal DNS was time and the customer became the external IP address of the public DNS and it received an unexpected cert of the router. Once we removed the public DNS servers from the DHCP server and used only DNS servers in-house, that the issue went away. Logical after we realized what was going on.

• HSRP support on the cisco SMB switches

  Hello!

  Just a question.

  One of the Cisco Small Business L3 switches support the failover as HSRP, VRRP, and GLBP entry protocols?

  Thanks in advance

  Hi Dejan,

  Oops, I overlooked the fact that you need L3 switches.

  In this case, indeed the Catalyst 3560 would be the best choice.

  Thank you for your trust to Cisco!

  Best regards

  Nico glacier

  Senior Network Engineer - CCNA

  PS: Could mark you it as answered? Thank you

• Try to add the Cisco router to hyperic - where are the log files?

  I have a hyperic server. I have create a new network platform for the snmp information in my cisco router.

  I put in the snmplp $ip, the snmpCommunity... and I thought that I was...

  Well, I'm not able to collect any settings.

  My question is, where are the logs for this?

  seems that you need a "connection of the agent" I guess it's to say to use any server running the hyperic on that agent?

  Yes, you need to select an Agent to perform the actual analysis of SNMP.  The Hyperic server doesn't have the capacity.

  On the Agent, you should be able to see the errors in the agent.log

• How to distinguish the samples from 6 different inputs analog

  Hello everyone, I'm still new to NOR-DAQmx. I write a C++ program that reads 6 analog inputs of the card PCI-6220.

  Basically, I created 6 virtual channels in a single task, looks like I'm acquisition of required inputs.

  However, the problem is that I don't know which sample comes from what analog input channel. I put the fill mode "DAQmx_Val_GroupByChannel".

  Please help me, how can I distinguish between samples of different analog inputs.

  Best regards from Kazakhstan,

  Khassan

  Khassan,

  Channel order would be decided in the order in which you added your channels to the task.  So let's say I create a task and adds three channels and add them in the order ai0 ai1 and ai2.  If I set the fill to "DAQmx_Val_GroupByChannel" mode, DAQmxRead will copy data in "readArray' such that ai0 data all together, followed by the data of ai1, which is followed by the data of ai2.  The size of each of these sections of the buffer must be returned through the 'sampsPerChanRead' argument to read.  So if were to call read and DAQmx returned 5 for "sampsPerChanRead", then my data buffer would look like this:

  AI0, ai0, ai0, ai0, ai0, ai1, ai1, ai1, ai1, ai1, ai2, ai2, ai2, ai2, ai2

  Hope that helps,

  Dan

• PowerCLI - how to distinguish the true placeholder SRM vm

  Hello

  I'm using PowerCLI to list all the vm that are in my vCenter but I am be double file for some of the vm.

  I checked in vCenter and found that what I'm be are real and SRM placeholders on the same list, how VM pouvez I distinguish real vm to SRM placeholder in PowerCLI?

  To extract all the virtual machines that are not placeholders of SRM, you can use the following command PowerCLI:

  Get - VM | Where-Object {$_.} ExtensionData.Config.ManagedBy.ExtensionKey - don't "com.vmware.vcDr"}

  SRM spaces reserved to retrieve only the virtual machines, you can use the following command PowerCLI:

  Get - VM | Where-Object {$_.} ExtensionData.Config.ManagedBy.ExtensionKey - eq "com.vmware.vcDr"}

• How to distinguish the same fields of XML to RTF model?

  Hi friends,
  
  I am using the XML file as a data source and create running in peoplesoft.
  There are two data fields same "DESCR", which are the filling running.
  Now if we run report, second field 'DESCR' shows value of the first field "DESCR".
  
  How to avoid above question, if same data fields in a single RTF model?

  You can have as

  
  

  I think that's what you need.

• How to distinguish between normal PDF and PDF with a form

  I recently created a pdf form to fill out for others. They will answer me by e-mail, attached with the form pdf and pdf normal another.

  Is it possible to quickly identify what is the pdf form, which is a normal pdf file?

  No, it sounds like a call to the plugin.

  Watch samples of VB - there should be one that deals with forms and shows how to navigate through the fields.

• How to connect my physical machine and a virtual machine?

  Hi all

  I installed windows 8 in my machine base and RHEL 7 and Windows 7 in VMware worksation.

  I want to connect my basic machine with virtual machines.

  that all changes I need to make in network card?

  should what properties of the network adapter I change?

  More

  In my Vmware workstaiton, I installed windows 7, in that i can't find my network card.

  It shows only a single network adadpter named as bluetooth network adapter...

  Please help me on this :))

  Hello

  For the first photo, it is the configuration of the network card to a virtual computer.

  For the second, it is the type of virtual switch on desktop.

  Adopt a virtual machine can be connected to a virtual switch(NAT/Host-only) of workstation.

  For more details, I found a page for you, it can helps you to better understand the networking of VMware Workstation:

  http://www.virtualizationadmin.com/articles-tutorials/VMware-Server-Workstation-player-articles/Understanding-Virtual-Networking-VMware-Workstation-9.html

  Also aid official docs talk about this part.

  Please, please have a look.

  VMware Workstation 11 Documentation Centre http://pubs.VMware.com/workstation-11/index.jsp?topic=%2Fcom.VMware.ws.using.doc%2FGUID-0CE1AE01-7E79-41BB-9EA8-4F839BE40E1A.html

• How to distinguish the SQL capabilities of PL/SQL?

  I m having trouble understanding what functions is used ONLY in SQL and are used in regular expr instructions (IE, variable assignment,). Can someone show me a list of each or maybe a URL to look for?
  
  I have searched through the guide and reference is the developer, but could not find an indication appropriate in a place that it is clear.
  
  For example, I thought that I can use the CAST function in a variable assginment as follows:
  

  declare
   cursor myCur is SELECT Value_varchar2(1) FROM table WHERE id = 1;
   myRec myCur%ROWTYPE;
   var_a NUMBER(1);
  begin
   OPEN myCur;
   FETCH myCur INTO myRec;
   CLOSE myCur;
  
   var_a := CAST(myCur.Value_varchar2(1) AS NUMBER(1));
   DBMS_OUTPUT.PUT_LINE('var_a = ' || TO_CHAR(var_a));
  end;
  . 

  It seems that CAST function can ONLY be used in an SQL statement, but no doc has so far only?
  
  Edited by: HappyJay 05/12/2010 12:05

  In PL/SQL, drop the length specifier when you cast:

  SQL> exec dbms_output.put_line(cast('123' as number(5)));
  BEGIN dbms_output.put_line(cast('123' as number(5))); END;
  
                                                 *
  ERROR at line 1:
  ORA-06550: line 1, column 48:
  (blah blah blah)
  
  SQL> exec dbms_output.put_line(cast('123' as number));
  123
  
  PL/SQL procedure successfully completed.