How to divide the source file without losing labels

Similar Questions

• How to divide the Source file into smaller files without export?

  Hi all

  I am a beginner with PPro CS4 and video editing in general. I did a lot of research on Google and the search of these forums for an answer to this question, but I have not found a clear answer. Here's my problem:

  I have many hours of HDV video in recent years with a Canon HV30. This sequence is on dozens of DV tape cassettes. I want to capture most of it on the disk.

  When I capture a band on the disc, I get a single large mpeg4 file. (Body captures all HDV films in mpeg4). "select Scene" does not work with the HV30, so my only way to make a small capture files would be set In/Out points with batch capture. But that would mean hours of fast forward and back with VCR type controls on the camera for the revision of all bands and points. I thought it might be more QUICK to capture everything simply a whole band at once, and THEN examine the band captured the Organization (he is much faster using the Purifier), and by dividing the file into smaller files within the Organization, thus avoiding mechanical advance and rewind on the camera itself.

  But the only way I can find for it seems to imply EXPORT clips. Am I wrong to think that the export of a clip to a new file involves a degradation of the original mpeg4 source file? Or there will be no loss of quality if I simply export to mpeg4 format?

  It seems that there should be an easy way to simply divide the initial capture in small source files for editing later, without putting the images through a new generation of (exporting) treatment, which could result in a loss of quality. Or I'm wrong about this?

  (CS4 Master Suite, i7 3630 k, 16 GB RAM, C: 256 GB SSD, 1 t D:, E: 1 t F3 setpoint setpoint F3)

  HDV film is mpeg2 (which is a number). CS4 is not scene detect you will need to use HDV split for this.

  http://strony.aster.pl/paviko/hdvsplit.htm.

  You can run your files already captured by hdv split and it will cut the file into clips and you leave.

• How to export the MTS files without losing quality 1080 p?

  I tried to figure this out for weeks with other different publishers, and they always a get reduced in quality or have issues of interlacing. Does anyone have a solution?

  Your going about this wrong.

  Click on your finished sequence to select.

  Go to the file menu > export > Media

  When Media Encoder opens, choose the H.264 format and for the preset choose YouTube 1080 p.

  Now, look at the summary.

  (If you haven't already done so, you will need to complete your You Tube credentials tab publish).

  MtD

• How to save the .txt file without opening a dialog box.

  Hello..

  How to save the .txt file without opening a dialog box.

  It is impossible to Flash running in the browser.

• How to identify the source file and edit reports in Oracle Sales R12.1.3

  We use R12.1.3 with Database 11g.

  I would like to know - how to change the report.

  --------------------------------------------------------------------

  For example if I want to edit a report in the module INVENTORY existing any report.

  • After the name of the report identify the concurrent program
  • The program contributing to identify the name of the executable file
  • In the executable file name identify the
    • Method of execution: Oracle report
    • Running file: name of the source file for the report
    • Take backup and edit the report and replace the report in the TOP >

  But in the sales module (it is not form based Oracle - I think it is developed on OAF)

  I would like to know how to identify and modify the report.

  According to standard - module sales Oracle provides three report and according to our Advisor to use these three reports, we need to install BI

  So we must find the solution through internal developments

  Hello

  Set the option to profile ' FND: Diagnostics ' to 'Yes' at the level of the user and you will be able to get 'on this Page' link at the bottom of the page.

  Kind regards

  Zahid

• How to change the RSS feed without losing subscribers

  I am currently using blubrry to download my podcasts. I'm not the host through them, but rather on my own site and using my feed to send to iTunes (http://racingdudes.com/feed/podcast/). However, I spent to SoundCloud to start my hosting podcasts. I added my last three episodes of the podcast on SoundCloud and they integrated into my website. However, how can I change the RSS feed of my original stream to my new SoundCloud feed without losing all my subscribers and sides?

  My first thought was to connect to iTunes Connect and my current RSS is such a list, swap out for my new. Which will work? Is it that simple? It seems that I read many ways outdated, complicated to do this process just make sure, if this is the newest, easiest way?

  Appreciate your help. Thank you!

  In order to keep your subscribers, you must either add the "itunes: new-feed-url' to the original feed, or launch a redirect 301 on your server: ideally both." These will change to the new food store and also your subscribers will be transparently redirected - they won't even notice. The complete method is explained in detail here: http://wilmut.uk/move

  If you are unable to change the power supply and also cannot implement a 301 redirect, then using Podcasts Connect will redirect the store but not subscribers redirect. In this case, the only option is to include an announcement in the last podcast on old food (you could do a special episode) announcing the change and ask people to re-subscribe from the shop page.

• How to get the jar file without knowing his name and any class on the inside?

  Hello, everyone!
  
  I would like to know if there is a way to get a reference programmatically in the original container without knowing his name and any class it contains. I mean by "initial pot" the pot that was called in the prompt, like this:
  

  java -jar jarfile.jar

  or in another way, in a graphics system. To be honest, what I really want is to get a reference to the manifest of the jar, but I know that if I can get a reference to the jar I can get a reference to its manifest file. Or if you know a way to get the manifest directly, it would also be useful. So, is there a way to do this?
  
  Thank you.
  
  Marcos

  Ah, so you want to find the calling class and get its source code.

  I managed to get the class calling on occasion, but this is probably a somewhat fragile solution. You must extend SecurityManager because getClassContext() is a protected method.

      private static class CallerFetch extends SecurityManager {
  
          public Class getCallerClass() {
              return getClassContext()[3];
          }
      }
      private static CallerFetch callerFetch =
              new CallerFetch();
  
      /**
       * Find the class of the code which called the
       * method that invokes this method.
       * @return The class of the caller's caller
       */
      public static Class getCallerClass() {
          return callerFetch.getCallerClass();
      }
  

• I use two different versions of Firefox for two different employers - how to install the new version without losing an old?

  An employer requires that I use Firefox 3. The other requires that I use the most recent version. How to install a new version of Firefox to another path without overwriting the old version?

  The best way to have a version be an installation of Firefox Portable. The mobile facility is autonomous and will not affect your installation of Firefox "ordinary".
  
  http://PortableApps.com/apps/Internet/firefox_portable

  Otherwise, you will need to set up a profile specifically for version 2 and make sure the correct profile is launched in each version.
  
  http://support.Mozilla.com/en-us/KB/managing+profiles
  
  http://KB.mozillazine.org/Shortcut_to_a_specific_profile

  Overall, you are probably best to replace your current version of Firefox 3.6.25 with Portable Apps - http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 - version and install Firefox 9.0.1 that your installation "regular".

• TE2100: How to use the recovery CD without losing partition

  Hello

  I have a laptop Toshiba TE2100, divided into three partitions: a partition of Windows XP (sda1), a Linux swap partition and a Kubuntu partition. I would like to use the Toshiba recovery CD for the installation of Windows (which doesn't work), but it doesn't seem to be an option on the CD to install in a single partition and not to reformat the entire disk (I really don't want reinstall my Linux).

  I did some research, and a lot of Toshiba restore CD seem to have an 'Expert' Mode that allows an image to be installed on a partition of some, but I don't seem to have that.

  Any help would be greatly appreciated,
  Thanks in advance,
  -Kelan

  Hello

  so you should have an 'expert mode' option, I wonder this can´t find you. Another solution would be to transfer the image directly with "ghost" on the partition, but it means you start with ghost and then unzip the 'ghost' - image on the partition/HARD disk.

  Please give feedback so that we can chat about it...

  Welcome them

• How to find the source files for import

  I have difficulties to find a group of records after I imported the bridge to lightroom.  Records are in bridge and appear in my Explorer of files (windows 10).  I have number of file folders 1-12 for each month of the year.  Until recently all my subfolders in monthly records were available.  If I make an order import and select the drive C all records are there. After the import my files in the browser do not reflect the new folder.  He has always worked in the past, but now I can't for files and folders just imported.

  If I look at the previous import at the top of the browser, the images are in lightroom but I can't find them in the folder that I imported them.  The folder does not appear.

  Any ideas?

  Thank you

  Don

  Hi donm,.

  You can just + click or Ctrl + click on the folder in the library and go to the option 'Show in Explorer' or 'Show in Finder' to see the exact location of this folder on the disc.

  See the screenshot below

  

  Let us know if that helps.

  Kind regards

  Mohit

• How to use the crop tool without losing pixels?

  5616 x 3774 / res 72, is what CS5 says my Canon 5 d 2 large jpeg is off camera.

  Can I use the harvest too to make a picture of 20 "x 24" and keep all or most of these pixels? "

  Leave the area blank resolution?

  The lab I send the file to print, said they want 300 res files (just to complicate the thing a little more)

  Thank you!

  To tell the truth I do not use the crop tool. I use the selection Rectangle, crop image tool and the size of the image.  If you use the crop tool and fill a field of resolution in the crop tool crop tool makes all three operations including the harvest to the resolution that you have entered the resampling. Adobe also gave the crop tool implemented in CS6 that a lot in my arms. Don't mind at all.

  IMO if you use harvest its best tool to fill the field of the resolution. In this way the harvest will not resample.  You can enter height 24 20 width or height width 6 5 in fact the same proportions as it is 12:10

  After you do the crop you can use the size of the Image. In the dialog box uncheck resample set the width for printing on 24. You'll see Photoshop set a height 20 and set the resolution to a certain value. If the fall of DPI value below what you want check resample together in the desired resolution and interpolation method to use and then click OK.

• How to initialize the typedef table without losing the typedef

  Hello

  I'm running problems with initialization of a typedef that contains an array of clusters. The attached example updates the Clusters and displays the new table.

  It works great but I would rather to pre-allocate memory the entire table.

  I came with indexing the typedef, using the element for initialization of table vi but with this approach I loose the typedef.

  Is there a good way to initialize the typef?

  Thank you

  Lukas

  
  

• I have version 12 items with about 20000 pics on it. I got version 14. How to transfer data to the new version without losing labels or keys?

  Catalogs will be converted automatically when you start the new version and choose to do. For anything more ask in the forum PES. I don't know if there are specific warnings for current versions.

  Mylenium

• How to save pictures of Photos in the form of files without losing the GPS data?

  Hello!

  Can someone advice me in the following cases:

  I want to erase my Photos from iPhone and iMac. Before that, I wish I had pictures of my library of Photos saved as a regular directory with files. As Windows does, for example.

  Can someone tell me how to save all Photos in the form of files without losing the GPS data? Thank you!

  Just export them (File menu) in unmodified versions.

• How to use reveal all this without losing the work of culture?

  My workflow is to editing and cropping of images. I need the flexibility to perform any order.

  When I use the crop tool, I continue to delete the cropped Pixels unchecked. When I edit the images I want to edit the complete picture, not cropped image.

  If I use reveal all to make alterations on the full image after cropping, I lose my job of cropping. Is there a solution?

  How to use reveal all this without losing the work of culture?

  How to take a bath without getting wet?

  Enter drollery side you could use a path of access to store the current size before calling "Reveal everything", then later on the path as a selection of load, switch to the crop tool and hit.

  Or convert to smart object before you crop, then do the editing in the SO (it could be a potentially significant increase in file size, however).