How to identify the source file and edit reports in Oracle Sales R12.1.3

Similar Questions

• How to design the multi-onglet in rtf report in oracle apps r12

  Hello
  
  
  How to design the multi-onglet in rtf report in oracle apps r12
  
  a consultant who works on multiple projects in this report... . How to design rich text using the multi tab.
  
  
  Thank you

  Praveen,

  Already sent an invitation to chat. It's [email protected]

  Kind regards
  Vinod

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• How to move the MSWMM files and keep the data on my computer?

  I downloaded digital film from my camera to a destination on my D drive as a file MSWMM (collections), and whenever I try to move the downloaded film (collection), it does not recognize the movie more.

  How to move the MSWMM files and keep the data on my computer?

  The mswmm file is the project file, not a video.
  Think of it as a recipe for a cake, it only tells you what to do with the ingredients, but does not include the ingredients.
  The mswmm file tells the computer to look in a certain folder to use a video or audio file.
  If you move the file, then MM knows not where is the file, then you must tell it, by right clicking on a red x on the timeline and then choose search for the file.

• How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  After I enabled "Show hidden files, folders and drives" in 'Advanced settings', I can't yet see in the folder but I know there is a file in this program of WinRAR folder form as pictured below where I opened the case both at the same time.

  

  Hope you can help in this case...

  It would be possible that the file is marked as a system folder (which is just a check box in properties such as the hidden check box). So in your folder options, uncheck the "Hide protected operating system files" and see if it will be visible.

  Or another thing to try: remonter back a level, hold down SHIFT while you right-click the complete file and choose "Open command window here", then type DIR to see if the file is listed.

• How to disable the button create and edit button in IMPORT environment for all the modules of 6.1.1.1?

  Hi all

  I am trying to disable some built-in options for all modules as well as all users in paragraph 6.1.1.1.

  How to disable the button create and edit button in IMPORT environment for all the modules of 6.1.1.1.?

  Please help me solve this problem.

  Thank you

  Nefertari

  Thank you Ivy, Yes.

  I made some changes more in environment settings that helped me to turn off the button the user create a user/edit.

  Thank you

  Nefertari

• How to divide the source file without losing labels

  Hello

  I wonder how I could split my file source into two (or more) without losing the tags...

  Hello again, Wolfgang!

  OK, now I understand! However, I fear that there is no import in CVI mechanism, so that you can move the tags to another folder, other than doing this manually.

  However, it would be possible to realize a work around. Since you already have this information in your file of CFS (line Tags field), you can manually copy - paste on the line numbers the new file containing the source code you cut in half of the old file. A few steps:

  1. Either your source code file containing a.c source tags.
  2. Make a copy of a.c (e.g., British Colombia) and add b.c to the project.
  3. In your CFS file, copy - paste the field line Tags of a.c to the wire to the corresponding entry of the BC.
  4. Return to CVI, ensuring that the source code and the source of British Colombia tags are a perfect clone of a.c.
  5. Make the required changes to the a.c and b.c, such as the final result is the logical split of the original file. When you change a source file lines, source tags are also moved to the source editor.
  6. The end result is the code split between a.c and British Colombia, while keeping the corresponding position of the source tags.

  I am aware that there is work involved in the execution of these operations, but the result should be your result.

  I hope this helps, Wolfgang!

• How to divide the Source file into smaller files without export?

  Hi all

  I am a beginner with PPro CS4 and video editing in general. I did a lot of research on Google and the search of these forums for an answer to this question, but I have not found a clear answer. Here's my problem:

  I have many hours of HDV video in recent years with a Canon HV30. This sequence is on dozens of DV tape cassettes. I want to capture most of it on the disk.

  When I capture a band on the disc, I get a single large mpeg4 file. (Body captures all HDV films in mpeg4). "select Scene" does not work with the HV30, so my only way to make a small capture files would be set In/Out points with batch capture. But that would mean hours of fast forward and back with VCR type controls on the camera for the revision of all bands and points. I thought it might be more QUICK to capture everything simply a whole band at once, and THEN examine the band captured the Organization (he is much faster using the Purifier), and by dividing the file into smaller files within the Organization, thus avoiding mechanical advance and rewind on the camera itself.

  But the only way I can find for it seems to imply EXPORT clips. Am I wrong to think that the export of a clip to a new file involves a degradation of the original mpeg4 source file? Or there will be no loss of quality if I simply export to mpeg4 format?

  It seems that there should be an easy way to simply divide the initial capture in small source files for editing later, without putting the images through a new generation of (exporting) treatment, which could result in a loss of quality. Or I'm wrong about this?

  (CS4 Master Suite, i7 3630 k, 16 GB RAM, C: 256 GB SSD, 1 t D:, E: 1 t F3 setpoint setpoint F3)

  HDV film is mpeg2 (which is a number). CS4 is not scene detect you will need to use HDV split for this.

  http://strony.aster.pl/paviko/hdvsplit.htm.

  You can run your files already captured by hdv split and it will cut the file into clips and you leave.

• How to identify the Source of Table in a schema star

  Hello
  We have a star schema with an intermediate table (with fact, as data on sales data) and two tables of dimension (such as by location and product data). In the model, we have specified an intermediate table to have a FK relationship with these two dimension tables.
  
  Two questions:
  -How can I select staging table and the foreign key columns in a KM. There are a few options available to the general public as: FK_PK_TABLE_NAME which helps me get my dimension of array, CT_NAME, ERR_NAME, but I can not find a method to identify the intermediate table that is one of the source tables in my interface.
  
  -Is it possible to use the function getsrctableslist() somehow? For example we can use like I_TABLE or TABLE_ORD fields to identify the source table by using this function.
  
  -On the 'Control' of my interface tab, I see the constraints that have been on the target table, is it possible to check the constraints on the source table. For example I can check if the source table contains all the entries valid product by referring to the product as the forign key relationship dimension table.
  
  Pointers, advice, solutions are appreciated.
  
  Thank you

  It's Ok now...

  follow these steps...

  (1) at IKM (not ckm) create a new step.

  technology: the same to the table in step
  Logical schema: that of the table in step

  Code:
  
  <%=odiRef.getSrcTablesList( "","/*\n Will be used the table (and its alias): \n*/","","")%>

  (2) move this step just before the stage of "Flow Control".

  (3) to sewing, the same stage where is the code that you sent change me all code at 'FROM' to

  It will work.

• How to call the css file and the images of our application...

  Hai,
  
  
  IM downloading a .css file and images in it that apex of the components shared , now how call the css file and the images of my request... Please tell me detailed...
  
  Published by: David on November 3, 2008 12:51 AM

  Hi David,

  Sorry, has not seen that you had started a new thread, so have answered this in 'undefined' is null (or) not an object " "

  Andy

• FireSight: How to identify the source via a proxy device.

  Hi, I was wondering just how you would be able to identify IP addresses source devices on your local company network, if all http traffic through an internal proxy server?

  I have been performing discovery of the network for more than a week now and I'd start running of policies. But when I look for the analysis, I see is the source of my proxy server address.

  Thank you very much.

  You would need either the SourceFire appliance / ASA/w firepower to between the proxy server and your users or remove the Proxy Server all together.

  --

  Please do not forget to select a correct answer and rate useful posts

• How to add the JAR files and configuration files to the CLASSPATH when running?

  QUERY:

  During execution, I need to load JAR files and relevant config (.cfg files) and file .properties files in the CLASSPATH and run a specific one of the JAR java program that is available in the CLASSPATH.

  
  

  Please send me details of Java API or an example of java program to implement the use case above.

  
  

  Thanks in advance.
  

  
  

  During execution, I need to load JAR files and relevant config (.cfg files) and file .properties files in the CLASSPATH and run a specific one of the JAR java program that is available in the CLASSPATH.

  Please send me details of Java API or an example of java program to implement the use case above.

  You do not add to YOUR classpath once your application is launched.

  You create a NEW process for the application you want to run and provide an appropriate environment for it to run in-including the CLASSPATH or PATH environment variables.

  The Java API for the ProcessBuilder class has a simple example that shows how to create the arguments and to launch an external application.

  ProcessBuilder (Java SE 7 platform)

  There are also MANY other examples of the use of ProcessBuilder; just search the net.

• How to find the source files for import

  I have difficulties to find a group of records after I imported the bridge to lightroom.  Records are in bridge and appear in my Explorer of files (windows 10).  I have number of file folders 1-12 for each month of the year.  Until recently all my subfolders in monthly records were available.  If I make an order import and select the drive C all records are there. After the import my files in the browser do not reflect the new folder.  He has always worked in the past, but now I can't for files and folders just imported.

  If I look at the previous import at the top of the browser, the images are in lightroom but I can't find them in the folder that I imported them.  The folder does not appear.

  Any ideas?

  Thank you

  Don

  Hi donm,.

  You can just + click or Ctrl + click on the folder in the library and go to the option 'Show in Explorer' or 'Show in Finder' to see the exact location of this folder on the disc.

  See the screenshot below

  

  Let us know if that helps.

  Kind regards

  Mohit

• import of dimension and member via maxl, how to create the data file and rules files

  Hello
  
  I have a task of importing Essbase, dimension and Member for project requirement, I have to use the text file or spreadsheet.
  I wonder what format can be imported into Essbase?
  I tried to create, failed.
  
  You have samples to help me? file size and rules files...
  
  I'm looking for a lot in http://gerardnico.com/wiki/epm/essbase/dimension_build#about, but there is no samples.
  
  Thanks in advance...
  
  Best regards
  Samantha

  Have you been through this?

  http://download.Oracle.com/technology/products/bi/Essbase/demos/Essbase_11.1.1_Overview/Lesson4.htm

  Kind regards

  Cameron Lackpour

• NT may respond to your request because the source files and destination are the same

  Hi, thanks for reading.

  I'm having this problem and it is driving me crazy.

  I'm actually following a tutorial that you can check it out here: http://nightshifted.Tumblr.com/post/2559360661/tutorial-paused-animations

  Basically, I'm trying to make a gif animated with canvas (I'm sorry if my English is not so great). When I try to drag the layers in the canvas (step 2 of the tutorial), I get the error: "could not complete your request because the source and destination are the same."

  can someone help me? I have CS3 and CS5 and they get the error in both.

  Thank you in advance

  I think they mean Select layers and images and using the tool move, drag

  inside the document (click inside the document window and drag) to move the

  Choose the layers to half superior (transparent area), is not to drag the layers of

  the palette of layers in the document, which would give this error.

  MTSTUNER