How to download an application on the USB drive and install it then from there?

Similar Questions

• How can I transfer Win. 7 USB drive and install it on another computer?

  I don't want to win. 7 on my netbook more. I want to put it completely on my USB key and then install it on my desktop.  I don't have the DVD for her.

  If Windows 7 came preinstaled on your Netbook, you can not transfer it to another computer.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  If it is a license to retail, you bought in a store, then you will need to follow the instructions to create a bootable. See the article for instructions:

  How to: What are my options for Windows 7 reinstall media?

• is it possible to download windows 7 on a USB stick and install it on a computer wiped

  is it possible to download windows 7 on a USB stick and install it on a computer wiped

  Yes, but you must do what is necessary. ISO that you create on a USB bootable copy.

  Prepare the. ISO installation file.

  See the instructions for burning. ISO in Windows 7 or later files:

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-from-an-ISO-file

  You can also use the Microsoft USB/DVD tool, which is recommended for users of Windows XP.

  After getting the file .iso that you use it Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  For UEFI systems based

  If your computer is UEFI, they are normally the systems that come pre-loaded with Windows 8 or later, you need prepare the ISO for such a configuration file or you will receive an error during installation. The USB key must be formatted in FAT32 and use the GPT partitioning scheme. To do this, you must use Rufus, a small tool that you can download for free.

  

  Rufus - credit: Pete bastard/Akeo

  After installing Rufus:

  • Launch it
  • Select the ISO Image
  • Point to the file ISO for Windows 10
  • Check create a disk bootable using
  • Select GPT partitioning to EUFI firmware as the Partition scheme
  • Choose FAT32 NOT NTFS as file system
  • Make sure that your USB in the device list
  • Click Start
  • Close when you are finished

  Begin the installation.

  The following describes the standard way to start the installation, especially if you are in dual boot a 64-bit version of Windows 10 alongside a 32-bit version of Windows. Another way is to start from a version of runing Windows installation and select the partition where you want to install Windows 10. See below for instructions how.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  

  Once your computer is configured to boot from the DVD, you should see this option.

  If you are installing from a USB key, see the instructions below how prepare your computer to boot from a:

  http://Windows.Microsoft.com/en-NZ/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I have an XP machine (not); formatted the hard drive and installed Fedora instead. However, I would like to go back to XP now.

  I have an XP machine (not); formatted the hard drive and installed Fedora instead. However, I would like to go back to XP now. I have the product key, but really am struggling to install XP. Any ideas?

  original title: Reinstall XP on Fedora

  See if this can help, its for Windows 7 b ut can work for XP (worth a try).

  Windows 7 USB/DVD download tool:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
  Also: http://www.elmajdal.net/Win7/Using_The_Windows_7_USB_DVD_Download_Tool.aspx

  J W Stuart: http://www.pagestart.com

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Satellite P30: How to format the HARD drive and install a new OS?

  I have a satellite P30 laptop with Windows XP. I plug myself a new OS (namely because I can't find my old recovery CD CD and OS) that I want to do a re-shape full of my system. Reason is that my system has been painfully slower and slower over the last year. I even updated my RAM to 512 MB standard supplied with the machine to 2 GB, but it seems to have had little or no effect. So my questions are:-

  1] where can I get my hands on the restore CD that has all the drivers on this subject, and any recovery CD to reformat my HARD drive?
  [2] in the order in which I will make this reformatting?
  How can [3] after having bought an external HARD drive to keep files that I don't want to lose, I transfer those of before my re - format?

  Any help will be greatly appreciated

  :-)

  Hello

  You received with the laptop Toshiba Recovery CD! Am I wrong?
  So what s the problem?

  Simply insert the CD and try to boot from this CD.
  The restore CD contains all Toshiba drivers, tools and utilities Windows OS + additional software like Win DVD for example.
  The installation will set the laptop to factory settings, but will also format the HARD drive!

  Up to now, we come to the point 3; --> How do I save the data
  If you have purchased a second HDD and connect it to the USB port and transfer all the necessary files on the second HDD
  If you have purchased only the HARD drive, then you will need a USB HDD 2.5 case.

  Best regards

• My new HDD is damaged, I would that the instructions to remove the hard drive and install windows 7, so I can later install windows 8.

  Hardware failure on the disk.  Installer installed new drive and put it on Vista.  I have corrupted data and can not download the service pack 1 upgrade to windows 8.  Can I erase the hard drive and buy a cd for windows 8.  If yes how I wipe the drive hard and etc.  Thanks in advance, baildaily

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-8000ffff-unable-to-fix-need-advise/597003cb-e5a7-4198-8ae6-36cafe876005

• Upgrade the HARD drive and install SSD XP to Windows 7 upgrade - which command?

  I want to make some improvements to my trusty HP XP media center PC m7350n.  Ideally, here's what I want to do in a certain order:

  -upgrade the HARD drive (currently 250 and 500 GB installed, replace with 750 unique?)

  -install an SSD as boot drive (60 to 120 GB?)

  -Reinstall XP restore disks media center

  -do a upgrade 'clean' for win 7 Home premium (64 bit?) from the disc "upgrading"

  The Windows 7 upgrade disk looks like for XP/Vista, so I can't put new hardware and go directly to a cost of Win 7 install.

  Plan a.

  I understand the look of for the minimum size of disks restore disks.  All guess what SSD size would be the minimum? I guess the upgrade of the first hard drive and reinstall XP MC since the restore disks would be trivial (as opposed to their use after a motherboard replacement).  If I have XP MC on the SDS, it is only a reason any Win 7 no upgade SDS?

  Plan B

  If I install the SSD after upgrade to Windows 7, I guess I have to use something like a disk copy program to the boot from SSD HARD disk partition.  SUGESTIONS?

  Plan C

  Restoration of SKIP.  Move existing partitions of 250 and 500 GB drives to 750.  Update for Win 7.  Install an SSD.  Move the boot partition.  Use the same drive for both copy program?

  Am I missing something?

  In case anyone is wondering, I have a spare 750Go drive and the Windows 7 upgrade disk so the only "cost" of this update is to purchase the SSD (and if necessary disk copy program).

  Thank you!

  Don

  donprice11 wrote... I want to make some improvements to my trusty HP XP media center PC m7350n.  Ideally, here's what I want to do in a certain order:

  -upgrade the HARD drive (currently 250 and 500 GB installed, replace with 750 unique?)

  -install an SSD as boot drive (60 to 120 GB?)

  -Reinstall XP restore disks media center

  -do a upgrade 'clean' for win 7 Home premium (64 bit?) from the disc "upgrading"

  The Windows 7 upgrade disk looks like for XP/Vista, so I can't put new hardware and go directly to a cost of Win 7 install.

  Don,

  Please read this article by Paul Thurrott more "Clean install Windows 7 with upgrade media '. It essentially says you can make a completely clean install on a drive with no operating system. The key is not to enter the COA product key after installation is complete. I, myself, installed Windows 7 to discs using disks 'upgrade' several times without problems of installation or activation. The order I do it with, is as follows:

  1 copy all the files and folders of the 250 and the 500 GB HDD of 750 GB.

  2. remove the 250 GB, 500 GB and 750 GB of computer hard drives.

  3. install the SSD.

  4. install Windows 7 on the SSD without entering the product key.

  5. Once finished Windows 7 installation, enter the product key and activate Windows.

  6. return old hard disks of computer as needed.

  7. install purchased software and Windows updates if necessary.

  You should go to 4 GB of RAM to get the most out of Windows 7 64 bit and you can upgrade your graphics card.

  Note: You will lose all software provided CVS Windows XP on your m7350n. Make sure that you create your HP recovery discs before you proceed with the change of equipment or install Windows 7. Your HP recovery disks can have the factory included HP software... it may or may not work with Windows 7. Good luck and let us know how it turns out.

• Unistall the C drive and Instal to F

  Dear all, someone knows if I can uninstall Photo shop in me disc hard C and install a new drive hard f? with to have problems with me of licenses?  Thanks in advance

  Yes, you can uninstall, change your desktop app from the cc settings install (to install on your f drive) and then reinstall.

  to change the cc app installation directory, open your cc application > click on the gear (top-right) icon > click Preferences > creative cloud > installation location

• Just upgraded my iMac to Yosemite.  He is now on all fours.  I intend to reformat the hard drive and install fresh Yosemite and reloading the hard drive.  Can I turn my CS 6 Suite and Lightroom and then reinstall.  Everyone knows a sl

  I installed my iMac (2009) in Yosemite.  He is now on all fours.  I intend to do a new installation of the operating system.  This forces me to format the hard drive.  I have already backed up my data.  With further regard to CS 6 and Lightroom is the appropriate mechanism to disable the program and then reinstall it from my Adobe account?  Any other input would be appreciated.

  Yes, disable it before uninstalling.

  to reinstall, you only need your serial number and installation files.

  the installation files:

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I bought Photoshop elements 13 at BestBuy and try to install it on my MacBook Pro without a disk.  When I entered my serial number, it tells me that the number is not valid.  How he downloaded?  I checked the serial number and that's good

  I bought Photoshop elements 13 at BestBuy and I try to download on my MacBook Pro without CD.  The redemption code gave me a serial number, but when I entered the serial number, it tells me it is invalid.

  See if the following can help:

  Error "serial number is not valid for this product". Creative Suite

  If you wish to contact try to Support from Adobe using cat...

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• My drive hard g62 crashed, I replaced the hard drive and installed windows, but it will not verify as authentic.

  The product key on my laptop does not work when I try to verify that it is authentic?

  Did you install the same version of Windows that came on the phone, as in Windows 7 Home Premium (it is the most common version that I see on the portable class of consumers). The key works only for the original version.

• How to format the hard drive and do a clean install of XP?

  I have a legal windows XP profesional version to install and I need advice on how to format the hard disk, the version on it now was apparently a pirate vers.its years since I, did such things and my mind is old so I really need all the steps, a - z,.

  * How can original title - I wipe my hard drive and install win XP Prof? *

  Hi syynbbad,

  In addition to the post of cbarnhorst, please see the following article on how to do a clean install of XP:

  http://support.Microsoft.com/kb/978307

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How do I uninstall Satellite L300 - 11 q Vista and install Windows XP

  Hello!

  Please help: How do I uninstall Windows Vista from my laptop and install Windows XP?
  Should I do something with discs and seized BIOS, or I can just format C drive and then install XP CD-drive?

  How can I make a recovery disk before you uninstall Vista?

  Thank you very much!

  Hello

  It's very easy if you want to get rid of Vista simply boot from the Windows XP CD, format the HARD drive and install XP on partition C instead of Vista.
  That s it.

  I put t know what laptop have you but the laptop most recent are equipped with the SATA controller and the SATA driver must be installed or included in the CD of Win XP to install XP on the HARD drive. The SATA driver is part of the Manger of Intel Matrix Storage, which can be downloaded from the Intel site or page of the Toshiba driver.

  Just FYI; in this forum, you can find a lot of details in the various messages on the Intel storage Manger. Just use the search option.

  Good bye