How to dynamically generate columns in conventional reports

Similar Questions

• Hide dynamically last column in the report

  I have a classic report generated by a dynamic query. I never know how many columns will be returned by this query. I need show/hide the last column in my report. Any help would be greatly appreciated.
  
  Thank you
  Mark

  Hello

  as suggested, you can use jQuery selector.

  In your report the static id value we will say MYTABLE, and then in the same region in the page footer section established

  The 'tricky' part by their Summit, it is that when you set static id really put you it to the region (which is defined as a table) and not for the table that is in fact the data display. This table is part of the table for which you configure static id. That's why you use the selector "chart".

  Kind regards
  Aljaz

• How to hide a column in the report when there are only zeros.

  Hi Experts.,.
  
  Is it possible to hide a column in the report when there are only zeros.
  
  Thanks in advance
  Vincent

  Vincent Krishna wrote:
  Hi Experts.,.

  Is it possible to hide a column in the report when there are only zeros.

  Thanks in advance
  Vincent

  No out-of-the-box, but there are several workaround solutions if you want to continue an any of them:

  (1) use a view selector. A single report will be a pivot table with the column, the other will have the same report less column. Users can switch reports.

  (2) use a column selector. The two choices would be this column or an empty space. If white is chosen (because the user has no values), the column "will disappear" according to the report.

  (3) guided use NAV. This method involves the intervention of the user. Build a small report using the single column and put a filter "is not equal to" 0. Because there is only a single column, so all lines are 0, the report returns no rows.

  Use this report in the properties of guided navigation from one section of the dashboard. Assign to this "If the report returns lines" and put the report that contains the column in this section. Now add another article on your table edge and in the properties of guided navigation of this section, set on "If the report will return no rows" and it points to the small report as well. In this section, put a second version of your report without the column in it.

  When the column contains all zeros, the second section with column will not display in it; the first section is not displayed. When at least a line contains a value not zero, the first section is displayed with the column, and the second part will not be.

• How to dynamically generate text or all component areas?

  Hello

  I use Flex4 SDK and Flash Builder with eclipse plugin(trail version) for the development of a flex project.

  I have problems to dynamically generate text boxes.

  When I click on a link button, I want a text box to display on the screen. I tried a few examples that I found on the internet but without success.

  I appreciate your time.

  Thank you

  Ravi

  What error do you get?  Maybe try addElement instead of addChild

• How to dynamically add columns to the table

  Hi all

  I'm new to ADF and need help on sub condition.

  We have created a ViewObject on the EMPLOYEE table that has under columns:

  EMP_ID,

  EMP_NAME,

  DEPARTMENT,

  COST_CENTER,

  BUSINESS_UNIT

  COUNTRY

  GCODE

  We need to create a page in the ADF with employee table to show only below the columns

  EMP_ID,

  EMP_NAME,

  DEPARTMENT,

  COST_CENTER

  Later, if necessary user should be able to add other columns to the page dynamically.

  Can you please advice on how to implement this feature.

  Thank you.

  Kind regards

  Vidya

  Hello.

  There could be a simple solution, which is to use the component PanelCollection.

  Drag ' drop your VO to a page and create a Table with all the attributes.

  For columns that emp_id, emp_name, cost_center, set the Visible property to false.

  Put the PanelCollection component on your page and drag your table inside.

  When you run the page you will see the view menu in the upper left corner of the table above. You can show/hide columns in this menu.

• How to dynamically generate where clause in Linq

  Hi all
  
  
  Oracle DB: 11 gR 2
  Oracle Client: 11.2.0.3.0 (ODP.NET)
  Oracle Developer Tools for Visual Studio
  VS 2010 (C#)
  
  In a Windows Form, it must query the data based on the values in list dropdown listboxes, which the user selects.
  Let's say two combox, one Department and one for salary
  Department:
  -1 all the
  10 Department 1
  20 Department 2
  30 Department 3
  
  Salary:
  -1 all the
  1 < 20000
  2 20000 to 50000
  3 50000 to 100000
  4 > 100000
  
  
  Here is the c# code to query data:
  using (var myEDMctx = new HREntities())
  {
  var LINQrslt = from emp in myEDMctx.EMPLOYEES
  Select emp;
  
  }
  
  
  The default values for the two combox should be everything.
  How to write dynamic where clause for this LINQ?
  
  Thanks in advance!

  That's what I do.

  var query = from c in customers
  Select c;

  If (where1 > - 1).
  Query = query. Where(c.Where1 > where1);

  If (where2 > - 1).
  Query = query. Where(c.where2 == where2);

  to return the query;

  Published by: Invincible on July 4, 2012 09:25

  Published by: Invincible on July 4, 2012 09:27

• How to dynamically generate data to be consumed by a LineGraph?

  Hello

  I am trying to build a LineGraph with the data I have on a collection called ArrayCollection pebw. I've noticed that the ArrayCollections used as dataProviders for a LineGraph usually go as follows (for example):

  private var expensesAC: ArrayCollection collection = new ArrayCollection ([] collection

  {Month: "Jan", profit: 2000, expenses: 1500, amount: 450},

  {Month: benefit "Feb": 1000, expenses: 200, amount: 600},

  {Month: "Mar", profit: 1500, expenses: 500, amount: 300},

  {Month: "ARP", profit: 1800, expenses: 1200, amount: 900},

  ([{Month: "May", profit: 2400, expenses: 575, quantity: 500}]) ;

  who provides the data and labels. How can I activate my pewb, who has data such that week (which would be the horizontal axis), TotalEnergySpent and devices (which would have a line in the chart for each device) in a table like expensesAC?

  OK just

  You need browse these data everywhere where its come and then add it to the collection arrayCollection objects;

  In a loop you would say;

  [Bindable]

  var pewb:ArrayCollection = new ArrayCollection()

  for (var i: int = 0; i

  Whenever you browse a new object is created and added to the arraycollection collection

  var obj:Object = new Object()

  obj. Week = "Jan";  share these values to the data source values.

  obj. TotalEnergy = 2000;

  obj. Devices = 100;

  pewb.addItem (obj);

  }

  The arraycollection collection would be a collection of objects that the chart can then identify the fields that you want to use.

  OK or not?

• How to dynamically change the value of a column in a report

  Hi, I'm new to APEX and I have a small requirement. I have a report in a page which I query. Report will always have only one record. I need to change a value of a column in this report of the value received from another page. I was able to send the value of another page on my page of reports to a hidden page element, but I don't know how I can configure this value received to this column in the report. Is this possible? If Yes, can anyone help with this?

  970829 wrote:

  Please update your forum profile with a real handle instead of '970829 '.

  Hi, I'm new to APEX and I have a small requirement. I have a report in a page which I query. Report will always have only one record. I need to change a value of a column in this report of the value received from another page. I was able to send the value of another page on my page of reports to a hidden page element, but I don't know how I can configure this value received to this column in the report. Is this possible? If Yes, can anyone help with this?

  Not really clear exactly what it is you are trying to reach. You want to replace the value of a column in the report with the value of a page element? If so, simply replace the column in the report with a reference to the required page elementquery:

  select
     empno
  , ename
  , job
  , :p2_sal sal -- Replace value of sal column with value of P2_SAL item
  from
     emp
  

• Tabular: how dynamically toggle columns and rows

  Hello
  
  I am very new to ApEx sorry if this has been addressed before, but I can't find a solution in forums or with Google, so here I am.
  
  I have an table based on a view, with two elements as the primary key and instead - of trigger for update (only the updates made, not of insertions/deletions) and the form works fine (I can update and refresh, etc.) The form was created with the wizard, not manually.
  
  My problem is, I need to turn off (disable - not hide) of columns in the report to prevent changes according to the value of one of its own columns - for example, a value of + 'q' + in the column period is going to turn some columns, while value of + 'h' + will toggle other columns. (The 'q' / 'h' value is the same for all the lines in the form.)
  
  Similarly, I also need to toggle all lines according to the value of the column one another .
  
  To sum up, displaying the form of tables and according to the value of a column, I need to turn some of the columns. Thenfor each line that I sail and, according to the value of another of the column, I need to enable/disable one or more items on this line.
  
  Any detailed help on how to proceed would be greatly appreciated (and if you need more information please ask.)
  
  It was very easily in forms with the triggers when-new-record and the elements of parameters as enabled. I am really so confused as to how to do this with ApEx - not to mention that I am helpless with JavaScript... Given that the page works well with the wizard-generated form, I want to keep it this way, but I'm ready to learn new tricks if the solution is building manually (as explained here: http://www.oracle.com/technology/products/database/application_express/howtos/tabular_form.html) or do it with a dynamic query (as explained here: http://www.oracle.com/technology/products/database/application_express/howtos/dynamic_report.html) although I'm not sure to understand things , explained here (and if she needs clean MRU treat...?)
  
  Thanks in advance,
  
  Ludovic

  You are the very welcome. I had a lot of help at the beginning of this forum so I try my best to give back. :)

  Good luck for the demo!

• Interactive reports using collections - how to control the column headers

  Hello
  
  I found a link on the forum somewhere that showed a step by step how to use collections with interactive reports, you can dynamically generate SQL code and also control the column headers. Does anyone know where is the manual?
  
  Otherwise, I know how to generate dynamic SQL code, but what is the best way to control the column headers.
  Sometimes, the report will have 17 columns and other times up to 30 columns.
  
  Thank you, Bill

  Hi Bill,

  You can use * & ITEMNAME.* notation for the column headers. This means that you can have elements of page/application that contains the topics you need which can, of course, be filled using PL/SQL and, thus, could be established in your code. It's a bit of pain to have to do this for each section, but I do not see a quicker method.

  Andy

• Dynamic requirement of columns in a report

  Hello
  
  I have a requirement in my report:
  
  Report takes month & year presentation Variable as input and the result should be dynamic over the past 11 months in the form of columns in my report.
  
  For example: if I choose to September 2011, report should have 11 columns that will begin from August 2010 until September 2011
  If I choose to August 2011, the report should have 11 columns that will begin from July 2010 until August 2011
  
  Please suggest how optimized to achieve this result.
  
  Thanks in advance.
  
  Kind regards
  Rahul

  Don't go you will get 11 months.. C.V. gives you just the latest data from 11 months...

  I use at least 5-6 reports like this. Check out my second link as well...

  Create an environment and then main report shud filter based on report middle values.

  Published by: Deepak Gupta on 13-Aug-2011 01:53

• How to dynamically change report style sheets in TestStand.

  How to dynamically change report style sheets in TestStand.

  
  

• Dynamically show/hide columns in the reports of the IR

  Env

  RDBMS: Oracle XE 11.2

  Request Express 4.2.4.00.08

  
  

  Hi all

  I am bulding an open source oracle apex app to track aircraft using ADS - B technology.

  I have somes types of units.  for example (kilometers, miles, knots, feet and metres).

  So, in the report of the IR, I want pick capable of showing a unit in time.

  For example

  Radio Group.

  Ground speed: (*) km/h () Mhp (Knt)

  Vertical speed: (*) ft/s (m/s)

  Can anyone help to build a code or point a direction to get above result?

  I tried already a thread, but did not work.

  Apex: Display/hide report column with Radio button. 2 cents to Oracle by Christoph

  Display / hide column IR dynamically

  
  

  I have a limited knowledge of Oracle APEX.

  
  

  Levi Pereira says:

  I am bulding an open source oracle apex app to track aircraft using ADS - B technology.

  I have somes types of units.  for example (kilometers, miles, knots, feet and metres).

  So, in the report of the IR, I want pick capable of showing a unit in time.

  For example

  Group of radio buttons.

  Ground speed: (*) km/h () Mhp (Knt)

  Vertical speed: (*) ft/s (m/s)

  There are different ways to do this. Probably the easiest would be:

  1. Create lists of values (LOVs) for units.
  2. Add the elements of the Group of radio -based unity LOVs report interactive region (IR), by specifying one of the units as a default value.
  3. Present the radio group via the Items property of the Page to send IR region.
  4. Create multi-column report for each metric combination / unit.
  5. Control the display of the report columns (applies to IR, but also classic report columns) conditionally using value of element in the Expression 1 = Expression 2 conditions Expression 1 is the group element of relevant radio and Expression 2 unit LOV value corresponding to that used in the column of the report.
  6. Add a dynamic action on the evolution of the components of the radio to refresh the IR region.

  A less obvious approach would also use LOVs, group radio elements and dynamic action of change/update as above, but only have one column for each measure in the report. The column value is calculated using an expression based on the value of the radio group, for example:

  .
  .
  .
  /* Assuming base speed unit is km/h */
    ground_speed
  * case :p1_ground_speed_unit
      when 'mph' then 0.621371
      when 'kn' then 0.539957
      else 1
    end ground_speed
  .
  .
  .
  

  The unit could be indicated in the column heading in the report referring to the element of the device by using a substitution of static text string:Ground Speed (&P1_GROUND_SPEED_UNIT.)

• Help - how to color columns in interactive reports

  Hello

  How color of the columns in an interactive report?

  I created a solution to help students to explore thousands of courses in England - with the results in an interactive report:

  https://production001-demandanalysis.DB.EM1.oraclecloudapps.com/Apex/f?p=20300118:1

  (For results, interactive report, click on a topic and then choose a topic from the cloud of course).

  What I want to achieve is the colouring of columns - as stated - but by programming - without the user being able to see all the highlights that I had to enter to achieve this.

  Any help much appreciated.

  Steve

  Version 4.2.2 apex

  Hello

  If I understand the requirement, you can add inline styles to CSS page.

  Here is an example to highlight your report example first two columns

  table.apexir_WORKSHEET_DATA td[headers="TITLE"] ,table.apexir_WORKSHEET_DATA td[headers="INST_NAME"]{
      background-color: #4699EB !important;
  }
  

  Kind regards
  Jari

• How to set the column width in the classic report.

  Dear friends
  
  I use Apex 3.2.
  
  I created Clasic report and I have the analytical column in my report this column I description of the problem, so I want to set the width of this column nn classic report.
  
  I try a code in the expression of html

  <span>style="width: 480px; display: block; white-space: normal; font-size: 11px;">#ACTIVITY_SUMMARY#</span>
  {code
  
  after apply abovemention code that display me in my summary like this and not manage width of column.

  style = "width: 480px;" display: block; space: normal; do-size: 11px; ' >Dear Newcomb, greetings! Thank you very much for the new request, and we are pleased to confirm the availability of a single cabin in all three categories of cabin on the M.V. Mahabaahu. We wish to inform you that two departures on October 15, 2013 & 29 October 2013 (golden triangle with Cruise) are operational and attached are the prices for your kind attention. As a special promotion for October 15, 2013 start only, we offer 100 USD by reduction of the person on the triangle of gold, combined to the cruise portion. Please review and advise us to block accommodation as a result. Cordially... pepette

  How to fix Width of column in classic report.
  
  
  Thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

  Hi najet

  Try this

  #ACTIVITY_SUMMARY#
  

  the * > * is removed.

  Kind regards
  Kees Vlek
  -----
  Company: http://www.orcado.nl
  Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
  Twitter: http://www.twitter.com/skier66
  If the answer to question please change replied and mark the appropriate post as correct / helpful.