How to enter in ePub of xhtml and css files to change TOC doc internal links that do not work in the e-Pub?

Similar Questions

• I recently had to re - install Windows XP on my computer and lost all my stored programs. Now my speakers do not work. The control panel says no audio device. What should I do to recover my audio? None

  My audio does not work. It worked before I re-install Windows XP. What should I do? I'm supposed to have an audio installation disc? I'm new on the technical aspect of computers, so I know only the basics?

  Using the Device Manager is a good way to get the drivers, but if you do a clean install on a computer or laptop, you must download the supplied drivers initially installed on the computer or laptop to the manufacturer. that is, if you have a Dell, then go to the Dell website.
  the site Web of HP/Compaq
  the Site of Asus
  Acer site
  Alienware website (Now owned by Dell)
  eMachines Web site
  IBM Web site
  Sony Web site
  Toshiba Web site

  Have I no all the em? Anyway, if you have a driver supplied with the computer disc, use this cuz he'll have original manufacturer drivers and the software that you get on the website anyway.
  Also, if it's a Dell, you would like to have a look and print their Instructions on how to install the drivers, Dell cuz drivers must be installed in a specific order.
  Good luck.

• When I try to update itunes I get an error message saying that windows setup has a program that does not work if the update cannot compete how can I remedy

  I am running windows xp and when I try to update itunes on my computer I gat windows error message install is missing either a program or a program that can't run so cannot complete the installation. How can I solve this problem?

  I received a response that gave me a link to the microsoft fixit Center which fixed several problems that have been causing this to happen. So if you have this problem, or a lot of other problems, you can go to the following

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

  other then you can go to

• All links that do not open in the same window now open a new window. CTRL + click and Middle click, as well as menu popup 'opens in a new tab' all open link in a new window. It started after the last (9.0.1) update. Thank you!

  The only method I found to open a new tab is to copy the URL, press Ctrl + T, and then paste the URL and go.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can also check the preferences of browser.link.open_newwindow on the subject: config page.

  • http://KB.mozillazine.org/browser.link.open_newwindow
  • http://KB.mozillazine.org/browser.link.open_newwindow.restriction

• How can I activate my Adobe Photoshop CS.  It will not work on the line and must be made by phone

  How can I activate my Adobe Photoshop CS.  It will not work on the line and must be made by phone?

  You must download the version without activation of CS2.

  Download Acrobat 7 and CS2 products

  Install, then enter the new serial number provided at this link.

• How can I reinstall iOS 10 on my iPad. I had a problem of update and had to force a reboot. Now, some applications do not work.

  By updating my iPad iOS 10 it locked up and I had to reboot. Now a few apps do not work.

  Is it possible to reinstall iOS 10 or should I just wait for the next update from Apple?

  You can restore the device. You can either restore from a backup, or you can restore back to the factory. See the information in these two documents of support for instructions, depending on how you want to restore.

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• How to disable the AppStore offers updated app that does not exist on the ipod touch 5g ios 9 and Reset counter app

  Regularly I receive notifications of updated Brainiacs Sudoku which I had deleted Ipod Touch 5 g a long time ago.  I can't disable the app update counter until I have download the update.  So, how to disable the AppStore offers updated app that does not exist on the ipod touch 5g ios 9 and Reset counter of the application once and for all?

  Try to hide this purchase

  Hide and show purchases iTunes or iBooks on your Mac or PC - Apple Support

• How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do?

  How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do now?

  Looks like a hardware problem (with your home button).  You should probably make an appointment with the genius of Apple on an Apple store near you.  This link can help:

  https://www.Apple.com/support/contact/ >

• I installed vista SP2 and when I started my computer back up everything on my computer is missing... How to get back all my pictures and music files?

  I installed vista SP2 and when I started my computer back up everything on my computer is missing... How to get back all my pictures and music files? I tried to do a system restore, and I can't go back any further, then the service pack install... so everything is still missing... Please help!

  Hello

  Were there any changes or updates made on the computer?

  I suggest you to see link and check if it helps.

  Recover lost or deleted files

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  See the articles and looking for the missing files.

  Find a file or folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-file-or-folder

  Tips for finding files

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

• My recovery file is full and more limit. How can I remove back unnecessary ups and delete files.

  My recovery file is full and more limit. How can I remove back unnecessary ups and delete files.

  I tried below it gave me an error. Kindly tell me what steps to take to remove unnecessary files and add additional space to my recovery file.

  Thanks in advance

  RMAN > target /.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00558: error occurred during parsing of order entry

  RMAN-01009: syntax error: found 'target': expected an a: "advise, allow, a.

  lter, backup, @, catalog, change, configure, connect, convert, copy, create, cro

  sscheck, delete, drop, duplicate, leave, flashback, grant, host, import, list, mo

  UNT, open, print, quit, collect, register, release, repair, replace, report, res

  HE, restoration, resync, revoke, run, sending, game, show, stop, coil, sql, start

  pass, carry, cancel the registration, update, validate, {,'

  RMAN-01007: line 1 column 1 file: entry standard

  RMAN > delete archivelog all;

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the delete command at 09/02/2014 20:48:19

  RMAN-06171: not connected to the target database

  RMAN >

  Hello

  If you could not ask about your db, you can watch in the log_archive_dest_1 parameter, which is in the init.ora file, to know where are your archived log files.

  my previous post would not be the solution to your problem, if so you can manually delete the archived logs and then delivers the command of rman below

  overlap archivelog all

  Concerning

• How can I compress javascript and CSS files in my export of Muse?

  How can I compress javascript and CSS files in my export of Muse? When I test my Web site with website speed test in pingdom (http://tools.pingdom.com/fpt/)

  the site has a low rating in the category of the number of CSS and javascript files because there is so much of... Is there a way to reduce the number of CSS files

  that are generated?

  In addition, the code we can place in Muse to tell Javascript to load last so it won't slow down the site are there?

  Thank you

  Theresa

  Regarding your first question. There is no way to compress the code CSS or javascript in files of Muse.

  When Muse exports a site it generates the CSS code for each page. There is no way to combine code similar to a lot of pages on a site by using Muse. (it is not the same process that build you using Dreamweaver or php coding)

• How can I get rid of the file name, date and size of the photo in the upper left corner of the module develop when I'm not working on the photos?

  How can I get rid of the file name, date and size of the photo in the upper left corner of the module develop when I'm not working on the photos?

  All shortcuts are listed on the view > menu Info Magnifier.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

  I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

  However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
  "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  What should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade