How to establish wireless communication between two PCs running in labview

Similar Questions

• How to enable wireless communication between two clients?

  I've got a WRT54GL with the latest firmware.  I have two computers that are both connected to the router with the IP via DHCP addresses.  Nor has a firewall running.  I can't communicate with them - even ping does not work.  I can ping the router itself by using the IP address assigned to this side WAN by my ISP.   Both computers have no problem to reach the internet through the router.

  What the router settings will allow communication to occur?  I can't find anything in the user interface of the router, which seems to control it.

  Thank you.

  I just figured out the problem: Isolation AP (in advanced wireless settings) has been activated.  I turned it off, and the problem is solved.

• The DDE network between two PCs running windows server 2003

  We seek to transfer data between two excellent sheets (Office 2003). Two excellent books are on different PCs running windows server 2003 and office 2003. The two PC's belonging to the same workgroup. One of them being run by Siemens PCs 7 process control system. I have ensurred running on both PC Netdde.exe. When excellent both books are on the same server they connect perfectly. When I run the client excel book on the other Pc (without changing something in the formulas of cells) the connection is lost. The DDE connection is approved on the PC server and this connection permission is full control for everyone. What is perhaps the reason for this problem? I think I missed a point. Can I get help for this. Thanks in advance for you.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• The way of writing to a wireless bridge between two different routers.1:broadband and dir 2:dlink 605 l

  I want to bridge.and wireless I can't do that... Please send me how to write to a wireless bridge between two different routers.

  1:broadband
  and
  2:Dlink dir 605 l,

  Hi Mohammed Ehsan Jourah,.

  Thanks for posting the request in the Microsoft community forums.
  I understand that you need to know how to make a wireless bridge between two different routers

  What version of the operating system is installed on the computer?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  You can try the steps at the bridge between two different routers wireless.
  a. determine the coverage area. When using two or more routers, the coverage area should be divided, and each router should be placed in a central location in each subdivision. If you add a wireless router to an existing network, this may mean moving the first router.
  b. decide which router is the main router. The main router is connected to the Internet, a LAN cable or other networks. It should be as close to the wired network connections or who has the best line of sight to another wireless network. In addition, the main router should be a high range router, allowing large tables of State and more users.
  c. buy a spare antenna, as the antennas that come with most routers do not have very good range. Quality omnidirectional antennas can push the range and signal strength of each of the routers, which, in turn, will reduce the cost by allowing routers less cover more space overall.
  d. deploy the primary router carefully. This router is the most important and requires most of the time of installation and options. Set the WEP (Protocol) encryption Service Set Identifier (SSID) and wireless, set up the Internet connection and test the router with some clients (computers). Once you get the main router deployed, deploy other routers should be easy.
  e. deploy the secondary routers, which must be configured to operate in "mode of transition." Secondary routers should be deployed around the perimeter of a large area or 'hot spots' where users placed - for example, will convene a bench Park or the table.

  Links:
  Create a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge

  Add a connection to a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-connection-to-a-network-bridge

  Hope this information helps you. If you need to get help or information with decision-making wireless bridge between two different routers, I'll be happy to help you.

• How to share internet connection between two computers (win7 & win XP)?

  "I plan to get cable internet connection ADSL broadband." And again, I want to share internet from one computer to another. »
  

  • But I have a question in mind which is lower.

  Before going to answer my Question Please read two notes point-
  
  Note:

  A. very important don't ask me what I have installed and what equipment I have in my PC? just give me a simple, easy answer. guess I'm no networking and I have two PCs. You teach me from scratch.

  B. do not use the more technical term. I hate it when someone using the most incredible technical term (its towers the response in the largest number of questions lol). just give me a simple answer.

  If you are eligible to condition or except my EULA :) go further and read my questions give me an answer simple and straight.

  Now please read the question below.

  Issues related to the:

  Q1. Which computer should I connect main internet connection (computer on which will better host win7 or Win XP)?
  
  Q2. What equipment I mean as a router, hub, NIC etc.? Please specify if these materials will be required for two PCs or for one.
  
  Q3. What type of Internet connection sharing will be better to be wired or wireless (cost, speed and security wise)?

  Q4. I need two IP address both part of connection to the internet between two PCs?

  Thanks in advance.

  Hi Zeff,

  You can make Windows 7 the main computer for internet connection and then host the Windows XP computer.

  For more information, see the article:

  Start here to set up a home network in Windows 7

  Networking of computers running different versions of Windows

  With respect to the equipment as a router, hub, NIC depend on the connection (wired or wireless) you want to use. You can also check with the ISP (Internet Service Provider) for more information.

  For more information, see the articles:

  What do I need to connect to the Internet?

  Setting up a network home

  Wired and wireless connections have great benefits, but they have also some disadvantages.

  Wired connection:

  > Faster and more robust than wireless connections but not so flexible when positioning of computers and devices because you must be connected to your Super Hub with an Ethernet cable.

  > Safer than wireless connections, but not so convenient for users of laptops and other mobile devices.

  WiFi connection:

  > Wireless! If you can connect when you want. However performance may be affected by walls, electric interference etc.

  > Ideal for users of laptops and other mobile devices, you can connect devices more but slower than wired connections

  > Very safe when used with higher level (WPA) encryption. You can connect your smart phone to your network wirelessly for faster browsing.

  However, unauthorized users could try to use your connection (which explains why security is so important).

  There are two types of IP addresses. external and internal. Both computers have the same external IP address but separate internal IP addresses. Each device in your network will have its own (internal) IP address. The external IP address, who sees the Internet is actually assigned to your router.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• How to remove a path between two anchor points

  Hello

  everything is in the title,

  could you tell me please how to remove a path between two anchor points without using the tool Eraser path?

  When I select these two folders and press to remove all disappeared.

  PS: I want to keep the anchor after the removal

  Thank you

  with the Selection tool direct (white pointer), click the path segment (no points) or select slide above without going on something else and tap on delete.

• GPIB communication between two computers

  I try to communicate between two computers via GPIB. A computer to send an order, the other will receive, save and then respond accordingly. This response will then be received by the first computer and displays (this is the emulation of a device, the real need is to communicate with a satellite TT & C)

  I realized all of this. However, to be in listening mode I wired a property node with a timeout-infinity (1) before reading. Now I can't leave the VI as he is still stuck in playback until the receipt of an order.

  How can I get out of the VI when he's stuck in playback function.

  PS: Using GPIB for communication is a requiremnet of ht eproect and cannot be replaced.

  Hello

  You can have the timeout of read and then clear the error and keep looping until you get a message.  And then you can use arithmetic consisting of stop the loop if you click on the stop button, or get one error other than a timeout, or if playback returns data.

  If it works for you?  I joined your 'writing and then read.vi' with the added code.  Double check my logic, I'm sure it's just but not run it.  Also, if you return a large amount of data make sure that the time-out period is sufficient.

• I want to create communication between two laptops by Bluetooth series

  Hello

  I'm trying to accomplish communication series between two laptops via a Bluetooth connection.

  The two laptops are NOT portable Toshiba, but they work together the Toshiba Bluetooth Stack For Windows. They have both also use the default Bluetooth Manager program supplied by Toshiba and Dell (just rebadged?).

  Basically I can set up a connection no problem, but then I have never send data serially from one computer and watch the receiver serial port on another computer but nothing happens.

  Is there a good tutorials for this? It would be nice to have something for the Toshiba Bluetooth Manager especially windows and buttons have names as explained in the tutorial.

  Thanks in advance.

  Adam

  I tried via a hyperterminal connection for testing purposes and it worked.
  Maybe the description also contains useful information for you.
  It is here:

  PC1:
  Start "Bluetooth settings-> Mode custom-> Select Remote PC-> Select"Serial Port"-> Accept proposed (in my case COM40) COM-> Confirm Assistant windows port
  until the installation is completed".

  PC2:
  Start 'HyperTerminal-> Select COM7.

  PC1:
  Start 'HyperTerminal-> Select COM40 (in my case. (See step 1 above) »

  PC1, PC2:
  Enter the password even if security is enabled for example "0000".

  PC1:
  Everything you type in HyperTerminal must be visible in HyperTerminal of PC2 and vice versa.

• How to give a delay between two Boolean?

  Hi all

  I want to insert a dalay in time between two Boolean values. My requirement is I want the second boolean to be switched on after delay 2 sec of variable Boolean 1 is turned on.

  How to do?

  Thank you

  Yes, I don't want to do antthing...

  Meanwhile, I also had the same idea...

  Thanks for the reply

• How to center the object between two guides (or a guide to the edge of the artboard)

  Simple question: How can I Center an object between two guides or between a fence and the edge of the artboard?

  Chris,

  You can (guides are your friends):

  (1) create a rectangle between two Guides or between the fence and the edge of the artboard by ClickDragging with the Rectangle (desired penalty) tool on a (location) on the other Smart Guides say path/path or page/path when you're there;

  (2) select the two rectangle of 1) and the object, and then click the rectangle, and then use the options in the align palette.

  Who should move your object in the Center in the direction you choose.

• TimesTen - Communication between two DSN

  Hello
  
  Currently I have a setup in Oracle DB in which there are two databases and objects are accessible in all of these databases via the link/synonyms database.
  
  Now, I need to replicate that in a Cache Timesten InMemory DB underlying of Oracle databases configuration that would involve the creation of a link between two DSN names stored on two different servers.
  
  Can you guide me on how to go about it.
  
  Thank you
  Karan

  Unfortunately there are several constraints here that aren't going to help you:

  1. when using the TimesTen "cache" feature a single TimesTen database can only cache data to a backend Oracle single instance. Only regular tables can be cached (not views, dblinks etc.). So, if you have two instances of Oracle Db and you need data in cache at the same time you will need two TimesTen databases.

  2. as mentioned, TimesTen does not support dblinks, remote queries or queries/transactions distributed between various databases TimesTen (well, what he does in some circumstances, but anything that will help you I think).

  3 TimesTen can replicate data between different databases TimesTen, but in general you can not use the level replication table with cache tables.

  So I think, to adopt TimesTen in your application as an important architectural work may be necessary. Only you can be the judge of that, of course, but considering this please keep in mind the constraints above.

  Kind regards

  Chris

• How to return all dates between two dates?

  Hi all
  
  I need get all dates between two dates, Oracle SQL and PL/SQL.
  
  for example

  01/10/2011 - date 1
  10/11/2011 - date 2
  
  # Return Values
  01/10/2011
  10/02/2011
  03/10/2011
  .
  .
  .
  09/11/2011
  10/11/2011

  How can I get these values? Any help will be useful.
  
  Thank you

  Maybe

  select :start_date + level - 1 the_date
    from dual
  connect by level <= :end_date - :start_date + 1
  

  Concerning

  Etbin

• How to find a number between two numbers?

  I try to find the numbers between two given user numbers and multiply each of them, but my code so far wont allow me to separate the numbers multiply:
  
  ex: the numbers are 5 and 10: my code gives me 5678910 together online.
  
  How can I sneek the * between these numbers? I know that I am seriously close here's my work so far.
  
  Any help is greatly appreciated.
  
  
  import java.util.Scanner;
  
  public class FindIt
  {
  Public Shared Sub main (string args [])
  {
  Console scanner = new Scanner (System.in);
  
  int userNumber, finIn, finIn2, finIn3;
  
  System.out.Print ("enter a lower limit > = 1 :"); ")
  
  
  do
  {
  
  userNumber = console.nextInt ();
  
  If (< 1 userNumber)
  {
  System.out.Print ("enter a lower limit > = 1 :"); ")
  }
  
  } while (< 1 userNumber);
  
  System.out.println ("the lower limit is" + userNumber);
  System.out.println ();
  System.out.Print ("enter an upper limit > = 3 :"); ")
  finIn = userNumber;
  do
  {
  
  userNumber = console.nextInt ();
  
  If (userNumber < 3)
  {
  System.out.Print ("enter an upper limit > = 3 :"); ")
  }
  
  } While userNumber < 3.
  
  System.out.println ("the upper limit is" + userNumber);
  System.out.println ();
  finIn2 = userNumber;
  
  
  
  int x, y;
  y = 0;
  for (x = finIn; x < = finIn2; x ++)
  
  CallIncr();
  
  
  
  
  
  }
  }
  
  Published by: 806590 on October 31, 2010 13:07
  
  Published by: 806590 on October 31, 2010 13:09

  Modified the code of the loop to as below

  for (x = finIn + 1; x)< finin2;="">

• How to create a relationship between two blocks

  Oracle forms 6i
  Hai All
  
  I've created a form that I have four button ADD, QUERY, SAVE, EXIT.
  
  I have two block named head and members.
  
  Four Chief areas namely block unitid, deptcode, codeno name.
  
  When I pressed the query button, and the cursor goes to the Chief name field when I enter the name of the leader and click
  
  Enter I give the codeno, the deptcode and the unitid of the leader_name.
  
  so now, I created another block in a tabular structure to bring members in the same deptcode that belongs to Leader_name.
  
  So pls tell me the steps how to create the relationship between these two blocks.
  
  
  When I enter the leader_name and gives enter need to bring the codeno, the deptcode, the unitid and
  
  I also need to give the members of this deptcode...
  
  
  Thanks in advance
  
  Srikkanth.M

  To write, only State a selection:

   :blk2.item = :blk1.item
  

  François

• How to start-up / Direction between two locations / POI

  Hi I have 2 sites.

  How to get directions / direction between only 2 places?

  (Like getting directions on a map of BlackBerry)

  I'm already trying to use

  RouteMapInvoker

  and set the market (my place now) and put an end to places.

  But only show POI my position now

  Thank you

  Before I was am hardcode the location of departure.

  After not set the starting location, management is working now.

  Thank you