How to extract the indictments of several tables

Similar Questions

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• How to extract the values of XMLTYPE column,

  SQL > create table temporary global xmtype_tab (xmlfile xmltype);
  
  SQL > select * from all_directories;
  
  SYS RESTOREDIR/home / / dbimptask /.
  
  insert into xmtype_tab values (xmltype (dbms_xslprocessor.read2clob ('RESTOREDIR ','LAS_SETUP.xml ')));
  
  1 line of creation.
  
  SQL > select * from xmtype_tab;
  
  XMLFILE
  --------------------------------------------------------------------------------
  <? XML version = "1.0"? >
  rowset <>
  < ROW >
  < DATA_CAPTURE_ON > 1 < / DATA_CAPTURE_ON >
  
  
  How to extract the values inside each tag?
  
  
  XML file has the following data...
  
  
  rowset <>
  < ROW >
  < DATA_CAPTURE_ON > 1 < / DATA_CAPTURE_ON >
  < > 9600 BAUD_RATE < / BAUD_RATE >
  < ACK_TIMEOUT > 1 < / ACK_TIMEOUT >
  < TUBE_TRAVEL_LIMIT > 4 < / TUBE_TRAVEL_LIMIT >
  < SEND_SID_TIMEOUT > 1 < / SEND_SID_TIMEOUT >
  < INDEX_Q_TIMEOUT > 2 < / INDEX_Q_TIMEOUT >
  < HW_HANDSHAKING > 1 < / HW_HANDSHAKING >
  < / ROW >
  < / LINES > ';
  
  I use the Oracle 10.2.0.3 version...

  Why does this work?

  You are missing the tag of the ROWSET:

  select extractvalue (xmlfile, '/ROWSET/ROW/BAUD_RATE') baud_rate
    from xmltype_tab
   where existsnode (xmlfile, '/ROWSET/ROW/BAUD_RATE') = 1;
  

• How to extract the signal from the waveform of my power level designated?

  Hi all

  How can I extract the signal of the waveform accroding to the power level? I read the Trigger & Gate .vi, but this vi retrieves the signal duration. I want to extract the signal depending on the power level.

  As shown in the following figures, the signal I want to deal with is between 130000 to 140000, if I Zoom, I can see the useful signal is between 135400 to 138200. The question is how to extract the signal in the area?

  I tried the sub_NoiseEst_And_Chop_Shell.vi in the example of Packet_based_link also, but this Subvi seems to be a bit slow. Can someone give me the best advice? Thanks in advance!

  

  

  I'm working on something similar, but have not had time to fully develop.

  My idea was to use an envelope detector (low pass filter) and then use a detection of energy VI on the envelope.

  Here is where I left

  

• Need urgent help! In my Vision Application, how to extract the parameters of the geometric model specified curve was generated by the template editor OR?

  I have an application of machine vision, in which the geometric pattern match technique was used to find the target in the images of type variant.

  as we know, we do a geometric model by model OR editor in the editor we can adjust the parameters of the curve specified settings to get the desired curves and we derive the custom box to ignore during the match. then we save the use of the same model in our application of vision.

  Now my question is coming. When I program my request for the geometric game. I have specified the parameters of the curve for the entrance of the IMAQ Advanced Setup learn ringtone 2, of course, I have to adjust this identical to the model, but I don't know how we extract the geometric model. I tried all the methods, for example, I can read data custom, IMAQ get characteristics of the geometric model(it's just for the basic functionality? so is there even a VI based edge?), even at anasys PNG file formats! But I can't read the info of the geometric model by myself!

  It is also illogical to adjust the CURVE SETTINGS manually again for the " IMAQ Advanced Setup Learn Pattern 2" after that I already have in the template editor OR!

  Hello

  Why do you need to specify the curve settings once again, if you have already built a model using the template editor? You don't need to use "IMAQ Advanced Setup learn geometric model 2 VI" to find games (see the attached example).

  You can wire the 'curve settings' control to 'IMAQ configuration geometrical game model 2 VI', but the values are not used if wire you a Boolean true to the node "use learning curve settings" (it's like that by default). To prove it, I enclose a small program with pre-created model (using the template editor) for a geometrical alignment. The model and the test of three images are also included.

  Try changing the settings of the curve with the 'use know curve settings' enabled, and you will see the corresponding score remains the same. Disable the Boolean control, then try to change the curve settings.

  Also take a look at the detailed help for "IMAQ configuration geometrical game model 2 VI", specifically the "learning curve parameters of use."

  I hope this helps.

  Best regards

  K

• How to change the extensions on several files with Windows 7?

  * Original title: Extentions

  How to change the extensions on several files with Windows 7?

  You hear no doubt, is that your movie software will only recognize certain types of image file formats.  If this is the case, you will need to reformat format files to any format PNG is recognizable by the software.

  Rather than we guess, please identify your «film» software

  Download and install IrfanView, which is a free utility for images.  http://www.IrfanView.com/

  IrfanView has the ability to read a great many formats of image files.  It can also convert image files formats.  And even better - for you - it can do all these things on a batch of files.

  As test, after I installed IrfanView, open one of your PNG files.  Now click on file > save as, and select the 'Save as Type' to be little matter the file type of your movie software will accept.  Save the file.  Make sure your movie software can accept the new file.

  Once you are convinced that you can modify files that you have in a format that you can use, use IrfanView

  File > Batch Conversion/Rename command.  If necessary, see IrfanView help on this topic.

• How to reduce the height of a table which is with PanelCollection and pc will find panelbox and pb is panelgridlayout and pgl is at the center of tableFirstTemplate?

  Mr President.

  How to reduce the height of a table which is with PanelCollection and pc will find panelbox and pb is panelgridlayout and pgl is at the center of tableFirstTemplate?

  Concerning

  Normally at the height of the table control you need property autoheightRows -1 and then set height in the table like this inlinestyle

  height: 300px;

• How to get the title of a table with FDK?

  How to get the title of a table with ad FDK C++?

  I did people. I get objects table paragraph and later the textual elements for each of them.

• I downloaded a free trial of Adobe Creative cloud and dreamweaver CC. I am not able to download a .psd to see how to extract the HTML and CSS.

  I downloaded a free trial of Adobe Creative cloud and dreamweaver CC. I am not able to download a .psd to see how to extract the HTML and CSS.

  Download button is disabled. What is the case for a free trial?

  Hey girijamg,

  I asked that you try to open a page because snippet Panel will be disabled until there is a html page is open in DW.

  Excerpt from Panel will be ready for the job that after any html page is open in DW.

  Hope it makes sense.

  Lalita

• How to connect the Ombudsman with several bpel process

  Hi Please someone tell me how to connect the Ombudsman with several processes bpel in soa 11g

  And here

  http://eoracleapps.blogspot.com/2009/11/how-to-call-synchronous-BPEL-process.html

• How to use the Type of Oracle Table values in the Select statement.

  Hello
  
  I get the initial set of values in the Table of Type Records of the Oracle and want to use the list of values in the Select statement.
  
  For example, try something like the following:
  
  TYPE t_record () IS RENDERING
  ID TABLEA.ID%type,
  NO TABLEA.NO%type
  
  );
  v_record t_record;
  T_table TYPE IS the v_record TABLE % TYPE;
  v_table t_table;
  
  -Code to fill the values of v_table here.
  
  SELECT ID, NO, COLLECT in BULK IN < some other table variabes here > FROM TABLEA
  WHERE ID IN (i) v_table USER.USER;
  
  I want to know how to use the Type of Oracle Table values in the Select statement.

  Something like this:

  create or replace type t_record as  object (
  id number,
  no number
  )
  /
  
  CREATE or replace type t_table AS TABLE OF t_record;
  /
  
  set serveroutput on
  declare
  
    v_table t_table := t_table();
    v_t1 t_table := t_table();
  
  begin
  
    v_table.extend(1);
    v_table(1).ID := 1;
    v_table(1).No := 10;
  
    v_table.extend(1);
    v_table(2).ID := 2;
    v_table(2).ID := 20;
  
    SELEC t_record (ID,NO) BULK COLLECT INTO v_t1
    from TableA
    FROM TABLEA
    WHERE ID IN (select t.ID from table(v_Table) t);
  
    for i in 1..v_t1.count loop
      dbms_output.put_line(v_t1(i).ID);
      dbms_output.put_line(v_t1(i).No);
    end loop;
  end;
  /
  

  No test!

  P;

  Published by: bluefrog on March 5, 2010 17:08

• How to extract the date of birth of the employee Table

  Hi experts,
  
  I'm new to SQL, help for my problem Pls
  
  I saw an employee table
  CREATE TABLE 'NIM_EMP '.
  (VARCHAR2 (20) "EMP_NO")
  "EMP_NAME' VARCHAR2 (100),
  VARCHAR2 (50) "EMP_DESIG."
  'HIRE_DATE' DATE,
  NUMBER OF "EMP_SAL."
  NUMBER OF "EMP_DEPT."
  DATE OF THE "DATE OF BIRTH".
  ) ;
  
  with data is as
  
  Emp_No - 203
  EMP_Name - Thérèse
  EMP_Desg - system administrator
  HIRE_Date - 10/12/2011
  EMP_SAL - 25000
  EMP_DEPT - 10
  DATE OF BIRTH - 09/02/1987
  
  Problem-1 - I want to show the birthday information to all users, because "it is today the anniversary of Mr.Upendran as - 25 years"
  
  Problem-2 - "today, Mr. Upendran is completed a year of Service in our concern" (this is based on the Date of HIRING)
  
  How to extract data from SQl
  
  Thanks in advance,
  Thérèse

  913370, you are right in both cases. I have corrected my code for the raw material.
  The second question may be fixed, because there is no sex information in the table.

• How to extract an element of a table 1 d product within a while loop

  Dear all,

  IM new to labview. I got the task to create the program for the route of some settings in my lab. I created a program to interface sourcemeter keithley 2636b that will help me source voltages in a range and get the current and the resistance and ground them. I used a simple while loop for this. My problem is the following. I need t extract the nth element of the array created for resistance after each measure and store it in an array. I need to make a resistance measurement several times one after another and save the nth element each time these individual tables and push it into a buffer so that I can trace elements in the buffer against a setting (this is called a measure TLM). I tried several methods. Some nice guy / gal had posted a solution using the loop to retrieve an item. Its doesn't work don't not in my program I need to use a loop in my time loop and it gives is not the correct value. Kindly advice. IM in a lot of pain. Help!

  And indexing does not work?

  Why don't you check out 2D paintings and the bays of clusters and try to make your 'readable' with that code?

  Also there are many resources available online:

  Introduction of 3 hours
  Introduction of 6 hours
  Bases LabVEW
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki
  OR learning
  Getting started with products OR

• How to extract the values of column aliases based on different column values?

  Hello gurus,
  
  I have a table with the following struture-
  

  "drop table T;
  create table T(Name, Symbol, Amount,dep) as select
  'Anderia', 'AA', 1050000,'HR' from dual union all select
  'Michael', 'ML',150000,'Sales' from DUAL union all select
  'Bill', 'BL', 1050000,'Finance' from dual union all select
  'Nancy', 'NY', 4000,'HR' from DUAL union all select
  'Anderia', 'AA',3000,'HR' from dual union all select
  'Michael', 'ML',1050000,'Sales' from DUAL union all select
  'Bill', 'BL', 1200000,'Finance' from DUAL union all select
  'Anderia', 'AA', 1200000,'HR' from DUAL union all select
  'Vish', 'VH', 1200000,'Marketing' from DUAL;"

  And try to find the values of the column as
  Name, symbol, dep, amount, % Total, Total $Cumm, rank but some additional as-columns
  
  Amount HR, % HRTotal, $HR Cumm Total,
  Finance amount, FinanceTotal %, $Finance Cumm Total
  Sales amount, a percentage of Total sales, $Sales Cumm Total.
  Amount marketing, MarketingTotal %, $Marketing Cumm Total
  
  then I use the following query to retrieve the name, the symbol, the dep, amount, % Total, Total $Cumm, rank columns.
  

  select name
       , decode(grouping(symbol), 0, symbol, 'Total') symbol
       , dep
       , sum(amount) amount
       , sum(per_total) "% Total"
       , decode(grouping(symbol), 0, max(Cum_per_total), null) "% Cumm Total"
       , decode(grouping(symbol), 0, max(rank), null) rank
    from (
            select name
                 , symbol
              , dep
                 , amount
                 , per_total 
                 , sum(per_total) over(order by rk) cum_per_total
                 , rank
                 , rk
              from (     
                      select name
                           , symbol
                  , dep
                           , sum(amount) amount
                           , round((sum(amount)/max(total_amount)) * 100,2) per_total
                           , dense_rank () over (order by sum(amount) desc) as rank
                           , row_number() over(order by sum(amount) desc) as rk
                        from (
                               select name
                                    , symbol
                                    , amount
                        , dep
                                    , sum(amount) over() total_amount 
                                    , sum(amount) over () 
                                 from t
                             )
                       group 
                          by name, symbol, dep
                  )
          )
    group         
       by grouping sets((name, symbol, dep), ())
    order by rank, max(rk) nulls last

  But I want to extract the following columns so... How can I do?
  
  Amount HR, % HRTotal, $HR Cumm Total,
  Finance amount, FinanceTotal %, $Finance Cumm Total
  Sales amount, a percentage of Total sales, $Sales Cumm Total.
  Amount marketing, MarketingTotal %, $Marketing Cumm Total
  
  
  as I want that all records, then will the dep..do-specific I need to use the case here?
  Thanks for all your time and effort in advance

  If I understand your needs, you need pivot: SQL and PL/SQL FAQ

• How to convert the layout of this table?

  I'm trying to convert to Dreamweaver, a layout that I created with tables in KompoZer.

  There are several tables, nestled inside the other and it works very well, but as you know KompoZer has its problems and now I want to switch to Dreamweaver for this new Web site.

  It seems that Dreamweaver recommended tables for layouts. Is this true? Why?

  And if it is true, how do I convert my layout?

  This provision is in fact a model I want to use again and again for the recipes.

  Thank you.

  Gina

  Note that the bar of navigation and the right column are built separately, so that they are not part of the layout I'm trying to re - create.

  I'm not sure I understand what you mean by that.

  The navigation bar and RightSideBar seem to be part of the General layout of the page.

  Do you mean that these areas are populated with Server-Side Includes?

  The General layout is 3 columns, is pretty basic.  #header, #wrapper, #leftSideBar, #mainContent, #rightSideBar & #footer.

  http://ALT-Web.com/templates/3-col-semi-Liq-layout.shtml

  The #mainContent area would require additional tanks and margins to manage the image of the recipe, #leftColumn and 3 horizontal boxes down. Not rocket science, but some experience with CSS and lines fleet is required.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB