Similar Questions

• How to feed an envelope in the printer?

  Hello

  I have a HP Officejet Pro 8500 has more. I'm having a devil of a time trying to figure how to feed an envelope in the printer so that it comes out nice and even.

  I put the envlope into the side of the face plate (on the top of the document that is already there) down, and when the printer 'Grab' the envelope, he brings him in the tortuous. I don't have this problem with plain paper, but given that the printer is only able to enter a certain situation, it will always pull in crooked - thus, the print on the envelope will be twisted as well.

  I tried aligning the envelope along both sides right and left of the status bar, but the printer will not accept envelopes that way - jams instantly. So I find myself putting the beautiful envelope in the Middle, and I got there with my hand to sort of "guide" it as the printer grabs. But no matter how stable I am holding, the grabber is always going to make the envelope twisted.

  There must be a better way to do it. What Miss me?

  (I use an Apple iMac and MacBook Pro, and I use a template on the Pages. I also have the word and I can use a Word template - but the result is the same).

  Thank you!

  Hello

  The procedure is a little long, read this book to page #24:

  h10032.www1.HP.com/CTG/manual/c02668142.PDF

  Kind regards.

• How to share a variable between the Mathscript Windows and a Mathscript node

  Hello

  I'm trying to share (just) a variable between the Mathscript Windows and a Mathscript node. I don't know why, but the use of the "global" Matlab function makes the mathscript node output formats change.

  I'm looking for a "Mathscript RT V9.0.1 module" as it may seem, there is. French technical support have some difficulty to find...

  Hi patrick33,.

  The code that you have attached should not report an error, so it seems that something has gone wrong with your installation of MathScript. My best guess is that it is the problem that is described in this knowledge base article. Your signature says that you use f3 patch, which is a good start. But the KB lists some other steps to take when you see errors about MathScript, impossible to compile. Can you try the procedure described in the article and let us know if that fixes the problem?

  Thank you

  jattas

  LabVIEW MathScript R & D

• How to load a picture of the XYgraphs when running

  Hello everyone.  I need to load a picture of the XYgraphs when running.  Each element of the array is a collection, an item is an XY Chart.  Each curve on its own XYgragh is generated as part of a search optimization.  The number of curves generated based on input from the user during execution.  Resulting curves can be sorted by the user according to different criteria.  Using the sorted curves, the user selects one or more games associated with operating conditions.  So, only 1 curve by graphic, as each curve has its own functioning conditions who were responsible of his generation (the other members of the collection).

  When I try to connect the data a little test vi, I get the error listed... that seems to be complaining that my data types match actually! ??

  Thanks a bunch

  Terry

  Look more closely at your data types.  Upstairs, you have two tables 1 d of double grouped.  While done in a 1 d table.  It is a pink cluster, transformed into a table 1 d of pink cluster.

  Look at the empty table going into the shift register.  Your XY graph is a table 1 d with a bunch of Brown.  This Brown cluster consists of two double scalars, not the two table 1 d double you up there.

  In your loop For on the top, try to convert the blue Angelfish in doubles, then the two values to group together.  Feed this cluster at the edge of the loop For and auto-index on this tunnel. Now, you will have a table 1 d with a bunch of doubles.  Which feed the element of the XY cluster at the bottom.

• How to make transparent cluster keeping only the elements inside the visible cluster?

  Hello

  Can anyone suggest me how to make transparent cluster keeping only the elements inside the cluster visible in the front panel.

  Thanks in advance,

  Vinciane

  As I said, use the space bar for what is paint. This works. Trust me.

  PS You cannot link to pictures stored on your hard drive. We don't see them. You must add them as attachments and then submit the post they get uploaded to the servers of NOR.

• How to change the color of the elements of cluster using the reference

  Hello

  I have cluster with 10 LEDS, each LED represents a test within my program, based on success or failure, I want to change the color of each LED, I use the cluster as input reference to test subvi.

  Is there a method to change the color of the induvidual elements?

  Thanks in advance.

  Can be used with any wire Ref properties are determined by the class of the wire Ref itself.

  Generic refs are geneirc properties.

  The FTA to obtain the properties of the elements within the cluster, you will need to tell LV class is a cluster. The same for the items in the cluster.

  Please consider this nugget on the help of control references. Don't worry about understanding everytihing that I wrote in this nugget, since it was written to be entertaining at all levels. Find the section where I show

  

  How to cast Ref nums as of specific types.

  Ben

• How to feed the DFF using the API fields

  Two new fields are need to be added to the employee assignment staging table to support the new design of the approval.

  So two new fields must be filled in HR Oracle using data in the assignment table.

  -> Finance employee id Manager needs to be filled in the FDF (assignment attribute 1)

  -> The agent code must be entered in the FDF (2 attribute assignment).

  How can I fill these two DFFs using an API. I mean how to feed the fields of DFF using the API?

  Use the API-

  hr_assignment_api.update_emp_asg

  Pass the values for the parameters as needed-

  p_ass_attribute1

  p_ass_attribute2

  See you soon,.

  Vignesh

• Common cause of failure of the Mirage server in clustered environment and how customers will be switched to the other server in a cluster

  Hello

  Can someone share me information about common cause of failure of the Mirage server in clustered environment.

  And how customers will be switched to the other server in a cluster to continue their operations from the server failed.

  Kind regards

  C Bathesha

  In general, Mirage servers are not lacking. It is very rare (and not, for example, to problems of storage or endpoitns, which are more common).

  May raise problems of overload, memory or hardware malfunction too little.

  After that you make server standard troubleshooting (the etc system event log), you must file a Service request by VMware.

• Need help on how to create the transformation of the Park by using the MathScript node?

  Hello

  I want to generate a transformation of the Park by using the MathScript node. But there is an error message which confused me. Please can someone help me to have a look of my program? Thank you!

  The error message is "error-90011 occurred in error in the function mail to line 1.  The sizes of the input matrices are incompatible.
  Check that the matrices have the same size or one is a scalar.

  Possible reasons:

  LabVIEW: Sizes of the input matrices are incompatible.  Check that the matrices have the same size or that one is a scalar".

  Hello

  The problem is that all of your entries to the MathScript node are vectors.  All entries of the vector to the MathScript node becomes vector lines.  A multiplication of two vectors lines generates a size mismatch error.  If you really want a scalar of this multiplication of output (by calculating the dot product of vectors), then you have to bring your 'a', 'b' and 'c' vectors or your vector of 'x '.  If you want everything just multiply your elementwise vectors and produce an output vector, you must use the elementwise multiplication operator '. *' (time point).  Use this operator between your 'a', 'b' and 'c' vectors and your calculation of fishing.  For example, on your first line,
  d = (2/3)*a.*(sin(x))+(2/3)*b.*(sin(x-(2*pi/3)))+(2/3)*c.*(sin(x+(2*pi/3)));

  Don't forget to also change your output to a 1 d of DBL array variables.  You can do this by right-clicking on the output variable and selecting "Choose Data Type."

  Grant M.
  Staff software engineer | LabVIEW Math & Signal Processing | National Instruments

• How to convert an array into a cluster of the same type as the one used to build the table previously?

  I have a group of 6 items I need to change in a table for the part of the VI process.  What I can do, but then I need to change in a cluster of the same type to be used elsewhere.  When I change the table in a cluster, I find myself with a cluster of 9 elements, which of course is not compatible!

  I am attaching snapshots of context-sensitive help in the initial cluster, the intermediate table and the final cluster (bad).  Regarding the photos, the length of the 1 d tables and values in their midst are the only subject to change things.

  Please could someone help by suggesting ways to work around this problem.  Thank you

  Please do not post bitmaps by chaning simply .jpg file name extension. Do not change the file type. There is a good reason why the forums software does not bitmaps, and this is because the file sizes are huge.

  To your question: right click on the table of the Cluster service and select 'Size of Cluster' in the context menu to set the size of the cluster of output.

• How to change IP cluster and management for the two interconnections Faric

  I need to change the IPs. How can I do this using the console? It was easy enough implemented, but something else when I need to change the addresses...

  This isn't the production

  Post edited by: Atle Dale

  Atle,

  This should help you:

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/SW/CLI/config/Guide/2.0/b_UCSM_CLI_Configuration_Guide_2_0_chapter_0100.html#task_2A93612BB74B49F5947FC916CB2E3571

  . / Afonso

• How does am sharing happens in the env cluster

  can someone indicate topics... Thank you.

  In general, the links ADF layer creates a JboDataControl object and stores it in the HTTP session. (This is not stored directly in the HttpSession, but in a container called DataControl Frame object. We're going for simplicity to skip those details). The HTTP session is replicated to another server in the cluster (which is done by the WLS cluster) and the JboDataControl is replicated as part of session replication. The JboDataControl contains an instance of a class of SessionCookie (there is a related class of the ADF, do not be fooled by its name and get an association wrong with HTTP cookies, which have nothing to do here). The SessionCookie contains the ID of the State AM passive of the instance of AOS, which was used by the DataControl last time. When comes the next HTTP request (it can happen on the same server or on a secondary server in the cluster, where the HTTP session is replicated), the JboDataControl allocates an instance AM pool (which could be an arbitrary instance of AM to the pool) and activates its State according to the ID of the report of the SessionCookie (using the passive of the passivation AM store state).

  Necessary AOS configuration to be configured to make "Tipping Transaction State on managed Release" so that this mechanism to work. This indicates the instance AM doing passivation of mandatory State at the end of each request. This must be done so that the application of ADF activate State AM on the other server in the cluster, if the failure of the principal server and the next request arrives on the secondary server. This mandatory passivation puts considerable achievements to the application. On the other hand, if the application is not clustered, passivation State AM happen only when a particular instance of AM of the pool is recycled in another user session. The performance overhead is the trade-off between the clusters and applications ADF nonclustered indexes.

  Dimitar

• If/else statement in the MathScript node

  I want to write if/else statement in MathScript node.

  If (Yes is Yes)

  {

  a = 0;

  }

  other (no = no)

  {

  b = 1;

  }

  'Yes' and 'No'--> of Type String

  'a' and 'b'--> Type Double

  Hi johndoe.

  Thank you for contacting National instruments.

  I would like to highlight a number of items which you may find useful for the implementation of an if-else statement in a MathScript node.  The first is a book white tutorial, which the second part explains how to use LabVIEW MathScript node. The second is an article describing the required syntax to write functions and scripts in the MathScript node, including instructions for the use of the If-Else statements.

  I hope that these help. Please let me know if you need additional assistance.

  Kind regards

  James

• How to get a date to the timestamp of a file XML format

  Hello

  I'm trying to get a date from an external XML file. My XML file looks like this:

  
  <>http://www.NI.com/LVData">
      8.6.1
      
          Date of birth
          31/03/1983
       
  

  I can get the system to retrieve the correct XML element that shows the nested and elements , but I have no way to retrieve correctly the date. It seems as if she interprets my date seconds since 1904. I try to keep the "readable" for the end user XML, so it is important to keep this date in standard U.S. date format. I eventually uses this date to calculate the age of something. I labour code to subtract a timestamp in the format of the date to the current date and time, but I can't access it when I get back from XML.

  Starting from XML schema, it looks like the timestamp element requires a cluster... but there is no documentation on what to spend. Any ideas how to get back an XML date in this format in a simple and clean?

  Here's my current VI:

  

  Thank you

  Ryan

  Cambridge, MY

  Quick Tip on "bundle by name.  You don't need to consolidate all these constants where the values correspond to what is the constant of cluster at the top.  The cluster constant defines the data structure and the starting values.  Simply group the values for specific change items.

  Example of tone would be a bit cleaner.  Although the format string should use a capital T.

  

  As always with dealing with the time, complications could arise due to dealing with time zones and leap years.  Zones shouldn't matter for the calculation of the years since you are rounded up to years.  Although you probably want to round down rather than round at most closely. (I forgot this part in my example).  The problem with leap years when you would be only in a certain number of days of the anniversary, he would round up the age.  The number of rounded days would depend on how much on leap days that nobody has seen in their lifetime.

• How to create a cluster

  Hello

  How can I create a cluster?

  Kind regards.

  

  You can group two or several wires together using the 'bundle' feature - the output is a cluster. This is the top of the example page.

  The other way is to drop the constand cluster and drag all the constants (like the digital and the chain) in the cluster. It is the example below in the extract of VI. You can also perform this operation in the façade - drop the constant of cluster on the façade and drag controls or indicators in it. They must be orders or the lights - you cannot have a mixture of the two.

  Also in case you are not familiar with the concept, if you are working with big clusters "enter def" them. In LV2011 cela by right-clicking on the block diagram by clicking "make type def. What it does is creates a separate file where the new cluster (or any other type of control) is saved. If you change the cluster - say then add a Boolean alogn with the digital and the channel - change occurs and spread through your program. This stops having broken you the son when you have two clusters wired together, you change one and not the other.

  Kind regards

  Dave