Error launching sidebar "insert disc"recipients"and click ok.

Similar Questions

• Error at startup, insert BPD Software

  I get a box every time I start up it says the feature you are trying to use is is on a CD-Rom or other removable disk that is not available Insert disk BPDSoftware and click OK

  Don't know what it is help please do disappear, it will not leave.

  You have some installed program called BPDSoftware. Autour Googling indicates that it could have something to do with a product of the HP (printer? HP computer?) you have installed. To stop the error, remove the call to the program at startup.

  Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Then see what is on the Startup tab. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista it will be blocked by Windows Defender and you will need to enable it so you can then check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Instead, use the Services.

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• Error setting in the form of CD - RW problem: Windows cannot format this type of disc. Insert another disk and try again.

  Original title: problem formatting CD - RW

  I want to copy some files (word documents) on a CD - RW. I just bought a new box of these discs: Memorex high speed 12 X 800 MB 80 min

  When I put a disc in my d drive, I get the following error message:Windows cannot format this type of disc.  Insert another disk and try again.

  However, I went in the d drive and clicked on delete, just to see if it would work.  It recognizes the disc as a CD - RW, and erased, and said I could now burn files to it.  I tried to copy the files to and and again got the error message.

  If anyone can help me with this problem, I would be very happy!

  Thank you!

  Hi mariec59,

  1 does happen with all disks?
  2. what program you use to burn the disc?

  We recommend you to check if the problem persists with another disc.
  We also recommend to run the troubleshooter for CD/DVD playback and burning. To do this, try the following steps:
  a. see play CD/DVD and burning issues.
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer and check if the problem persists.

  Also, see burn a CD or DVD in Windows Media Player

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error installing updates "insert microsoft XP Professional disk and click ok.

  original title: "insert the microsoft XP Professional disk and click ok.

  When I try to install my windows xp updates, I get the message "insert the microsoft XP Professional disk and click ok. If I had this drive, it's long since disappeared. Is there another way I can get my updates?

  Hi Nick ev.

  Follow the steps in this document to complete a system restore. This process will restore your computer to a previous point without affecting your personal information. If you have recently installed software or updates, and you select a restore point before installation, the software and updates will have to be resettled.

• TrayApps Message - the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the TrayApp disk and click on 'ok '.

  Original title: TrayApps Message

  I get a message, "TrayApp" - the component you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the TrayApp disk and click on 'ok '.

  Hi BobKern,

  Follow the steps listed in the article mentioned below to solve the problem:

  Resolving MSI startup errors

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stop/Fix "Please insert the last disk of all selfextracting and click OK to continue.

  (With the help of Win 7 32 - bit update)

  I have not used a disk of 3.5 inches for many years.  In addition, I have not used any device (USB, CD or DVD) that has / had problems of "whole selfextracting.

  Also, AutoPlay was disabled on my system for years.

  That said, whenever I do a search of file/folder I get "Please insert the last disk of all selfextracting and click OK to continue.

  How can I be to determine:

  1. What causes the error message and/or
  2. How to stop it forever!

  Thanks for any thoughts or ideas!

  DennisCPA

  Don't know if you've discovered this done yet for you, but I would say it is your usb flash drive. It happens when he is out BEFORE you used the 'Safely remove' icon on the taskbar.

  If it is, then you must copy any information on the USB key to another location and format the USB. Then you can copy the info on it and you're right to go!

  This will continue to happen sometimes even though you have the properties/policies defined in a quick deletion. I got mine the value of the radio button performance and ALWAYS use the icon REMOVE safe in your taskbar. Once you find that your data will be corrupted if is not removed properly, even if the ssd is supposed to be "hot." If you have a usb key that has a light on it, wait for the light to STOP BLINKING before removing it. If you do not have a light on this issue, it is always advisable to wait a second or two after the popup window say you that it is save to remove your USB.

  See you soon

  Glenn

• error message: "Please insert a disc into drive DVD D."

  I'm trying to copy files from my hard drive on a DVD. I put a blank disc and get the error message: "Please insert a disc into drive DVD D." have you tried several disks with the same result, & all are empty. The original files were on a disc & system had no problem at the opening of this disc.

  Hello

  Try this to Fix It: http://support.microsoft.com/mats/cd_dvd_drive_problems/ . Not exactly a rare problem in Windows 7.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Impossible to uninstall Silverlight "insert disk"Microsoft Silverlight"and click OK.

  Original title: worm Microsoft Silverlight 4 can't update ver 5

  I am running windows 7 and am trying to upgrade Microsoft Silverlight version 4 to version 5 (5.1.10411.0) (4.1.10111.0) via windows update.

  However, the installation fails and then when I try to uninstall manually, I get a pop up saying: "insert disc"Microsoft Silverlight", and then click OK."  I can't continue because I know that I have not installed on a drive.

  Any help would be appreciated.

  Hello

  Follow the methods mentioned below:

  Method 1:
  Check out the suggested link to repair the corrupted installation of Silverlight

  http://support.Microsoft.com/kb/2608523/en-us?SD=RSS&SPID=12929

   

  Method 2:

  Try to uninstall Silverlight 4 using Microsoft Fix and check:

  a. to do this run the Fixit tool from the following links.

  b. click on the link below and select run now button.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  c. After you download and run for the first time

  d. Select run on window smallpop and select run on Internet Explorer-security warning window.

  e. Select detect problems and allow me to select patches to apply.

  f. Select UN-installing.

  g. after the selected audit option that you need to uninstall, and then click next to uninstall. Restart the computer.

  h. now trying to install silverlight 5 manually and check.

  i. http://www.microsoft.com/silverlight/

  If the problem persists, consult the link suggested

  http://forums.Silverlight.NET/

  I hope this helps. Get back to us with results.

• I opened a new tab and click on the bookmark in the bookmarks bar, and the web site opens in a sidebar. I want it open in the window with full tabs.

  I love Firefox, but this problem frustrates me. I want to access a favorite site and have bookmarked. When I click this bookmark, the site opens in a sidebar! How can I open in the window of the tab complete?

  You can change the properties of the bookmark for this problem.

  If you right click and choose Properties, you will check a box to the bottom of the dialog box that opens the bookmark in the sidebar. Uncheck the box that and click Save.

  It work?

  (When you use a link on a Web site to store a bookmark, they added in this way. You can use Ctrl + d or the 'star' of the address bar to add the bookmark without opening it in the box.)

• I'm more able to launch a web page, when I click on the URLs in Email, Skype and other internet applications, etc.

  Original title: URLS not clickable links

  WinXP SP3 all updates
  AMD Athlon2 2.7 GHZ
  2 GB 800 mhz SDRAM
  256MB NVIDIA GeForce video

  I'm more able to launch a web page, when I click on the URLs in Email, Skype and other internet applications, etc.

  I downloaded the patch of MR Fixit of MS site that was supposed to solve the problem, but did not.

  Ran the restore of the system (for example successfully MS) in time before the problem started, but did not remedy problem.

  Scanned with Avast A / V & Advanced System Care 5 to remove all malicious software, viruses, registry fixed etc. Did not help.

  Any suggestion would be appreciated. ;-)

  Have you tried what Bruce suggest you try?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/unable-to-click-on-a-link-within-Outlook-Express/df6631b6-67c8-497c-9ED5-8559648eb88a

• I used administrative services to change my share on automatic. I have applied these changes and click Start. I had a dependency service 1068 error message or group was able to start.

  I use Bell Fibe 25

  My computor is running on the windows xp proffesional 64

  Also don't see xbox 360 image in the area of media sharing in windows media player

  ????

  Hi DougGowers,

  Follow the suggestions below for a possible solution:

  Method 1:  When the "Error 1068" error is logged, view the dependencies for administrative services tab to ensure that the services that rely on administrative services are not stopped. To view the Dependencies tab, follow these steps:

  a. click Start, click run, type services.mscand click OK.

  b. right-click on administrative service you wish to view and then click Properties.

  c. click the dependencies tab.

  If the service that depends on the Administrative function is stopped, right-click the service in the Services console, and then click Start. Then, try again changing administrative service.

  Method 2:  Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  You can also see the following articles for more information on sharing media with Windows Media Player:

  Share your multimedia files

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/share-media

   

  Listen to music from your computer to Xbox 360

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/stream-Xbox

  Let us know if that helps.

• Error on startup: "Disk boot failure, insert system disk and press enter".

  Original title: start problem

  My wifes at startup computer appears with the message disk boot failure insert system dicand press ENTER.

  If you press on enter the computer starts with having to put in the system disk.

  any ideas please.

  Kim

  Hi Kim,
   
  -Have you done recent changes made to your computer after this problem started to happen?
   
  If your computer has just been formatted, your computer might need to insert the boot CD in order to run it. So you can get the error message Disk Boot Failure-press and insert disk entry displayed on the screen whenever you try to run it. This could be related to:
  • Startup options is incorrectly set in BIOS Basic Input Output System ().
  • A non bootable CD is in your CD player
  • You don't have any boot device
  • You have installed a new hard drive
  • The hard drive is not properly connected
  • Your system files have been infected

  Verify that one of these reasons may be the cause of your problem and post back with the details to help us to help you better.

• Error: Please start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows during the upgrade to Windows 7

  Original title: Windows problem of dimming.
  Problem: impossible to up grade windows vista to windows 7
  Error message (roughly): start the previous version of windows then click on the DVD-ROM and click on setup.exe to install windows.
  Description: actually I have windows 7 genuine DVD which can start the installer to start. but I can't find anyway to install windows 7. I tried what windows error msg says.
  Help.
                                        

  Hi laadpiyush,

  1. which version of Windows Vista is installed on the system?

  2. which edition of Windows 7 you are trying to upgrade?

  3 - is 32-bit or 64-bit?

  Step 1:

  You can first check the upgrade paths to perform an Update Installation of Windows 7.

  Links:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Step 2:

  Before upgrading to windows 7, you can try the following steps and start the upgrade installation.

  A. back up all important data on the system.

  Run the Upgrade Advisor

  See the link to download and run the Upgrade Advisor:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Software c. Security uninstall and reinstall after upgrade Installation.

  D. sign off all external devices connected (except keyboard and mouse) and start the installation.

  For more information on the Upgrade Installation, see the links:

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/6719ae72-7187-45CD-80f7-55e66f3ec686

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.