How to find and replace this text in the url

Similar Questions

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• How to find and replace data in fields of form in acrobat xi, its not allowing to do while trying, one

  How to find and replace data in fields of form in acrobat xi, its not allowing to do while trying, request adobe livecycle to settle. Help, please.

  Best way to do is the following:

  -Open the PDF in Acrobat.

  -Go to tools - form - form more Options - export data.

  -Save form data in an XML file somewhere on your system.

  -Open the XML file in a plain text editor (I recommend Notepad ++).

  -Let's say you want to replace all the years in dates "2013" to '2014 '. Do a global search & replace '2013-' to '2014' - (I added the dashboard in order to ensure that only the date fields are changed).

  -Save the XML file (maybe under a new name).

  -Go back to the PDF file and now go to tools - forms - more form Options - import data.

  -Select the modified XML file and import it.

  -Fact!

• CHKUPD loads at startup. How to find and delete this file?

  CHKUPD loads at startup. How to find and delete this file?

  CHKUPD loads at startup. How to find and delete this file?

  Not a matter of Microsoft/Windows.

  http://answers.Microsoft.com/en-us/search/search?searchterm=CHKUPD&CurrentScope.ForumName=Windows&CurrentScope.filter=windows_xp-files&askingquestion=false

• How to find and replace text in the index entries?

  Hello

  Recently, I copied a manual to create a new one for another product. After a global search and replace the product names and other texts, I needed to replace a specific word that appears in the index entries.

  I noticed the search box would allow me to search the text of the marker, but I had to replaceme the word by hand - cut and paste the new Word, click on change the marker to save it and then find the next occurrence.

  It's with frame 7.2. Does anyone know a faster way to do this?

  Yours,

  Michael F.

  =========

  Peter,

  Thanks for the lead.

  I downloaded the zip file and all it contains is a DLL file, but no instructions.

  What should I do to make it work and how do I know that it works?

  Yours,

  Michael F

  ========

• How to find and replace a URL in the content

  See the following page:
  
  http://democraticpartyofgeorgia.org/events/index.cfm?fuseaction=week & SM = 9 & SD = 9 & SY = 2007
  
  He pushes the margins way because some people type in long URLS in their description of the event (see the meeting September 10). I would like to be able to analyze the event description and replace that long url with a hyperlink where the long url is in the attribute href, but which is related is something link 'see link'. Is it possible to do? I can search for the instance of "" http:// ' of course, but can't seem to find a way to tell where the ends of the link... "

  Look at the ActivateURL udf to
  http://www.cflib.org/UDF.cfm/activateurl

  It's really more a question on a very long word of packaging. The URL is not packing, and it's what drives your margin. You need the column to encapsulate your column is a bit more liquid.

  Use the wrap() function CF.

  You can also go the road CSS, but the best solution I found only works on IE.

• How to load and replace random swf in the same charger on stage?

  Hi... it's very simple, but for some reason any escapes me: using AS3 how a swf file can load another swf to replace itself in the charger still on the stage, while at the same time calling a function of randomization in the first frame of the main timeline, to randomize the next swf?

  At the end of each swf (called "koan_ # .swf"), it is the following old AS2 code... it has been used to choose randomly, and then play a SWF of koan table:

  _root.index ++

  If (_root.index > _root.koan.length - 1) {}

  _root.index = 0;

  _root. KOAN.shuffle ();

  }

  _root.koan_loader_mc.loadMovie (_root. KOAN [_root.index]);

  This code on the first frame of the main timeline loads a koan random swf file correctly, but after that the koan plays I'd like to load a new swf random koan.

  function shuffle(a:Array):Array {}

  var len:Number is. Length-1;

  for (var ivar:Number = len; ivar > = 0; ivar-) {}

  var p:Number = Math.floor (Math.random () *(ivar+1));

  var t = a [ivar];

  a [ivar] = a [p];

  a [p] = t;

  }

  return a;

  };

  var: index: uint = 0;

  var koan_loader:Loader = new Loader();

  koan var: Array = ['swfs/koans/koan_1.swf","swfs/koans/koan_2.swf', 'swfs/koans/koan_3.swf', 'swfs/koans/koan_4.swf', 'swfs/koans/koan_5.swf', 'swfs/koans/koan_6.swf', 'swfs/koans/koan_7.swf', 'swfs/koans/koan_8.swf', 'swfs/koans/koan_9.swf', 'swfs/koans/koan_10.swf', 'swfs/koans/koan_11.swf', 'swfs/koans/koan_12.swf'];

  KOAN = shuffle (koan);

  koan_loader. Load (new URLRequest (koan [index]));

  MovieClip (this).koan_loader_mc.addChild (koan_loader);

  Thank you very much.  I tried several variations of updated AS2 code but am at my wits end.

  -Very well, bloody forums join the file for some reason, so here is the code:

  Copy and paste this code into a text file and save it as InterfaceEvent.as

  package {}

  import flash.events.Event;

  SerializableAttribute public class InterfaceEvent extends Event {}

  public static const = "koanFinished" KOAN_FINISHED:String

  public void InterfaceEvent (type: String, bubbles: Boolean = false, cancelable: Boolean = false, int index = - 1, item: Object = null) {}

  Super (type, bubbles, cancelable);

  This.index = index;

  This.Item = item;

  }

  public var int index = - 1;

  public var point: Object = null;

  override public function clone (): Event {}

  return new InterfaceEvent (this.type, this.bubbles, this.cancelable, this.index, this.item);

  }

  }

  }

• How to get and replace a key on the Satellite A100-522?

  Hey, Toshiba.

  I have a Toshiba Satellite A100-522 model No. PSAA2E-01C01EED and one of my shift keys
  has broken below, so I can't use it (the small plastic bar to balance the key is broken
  If the key "blockages". Can I send it for repair to the warranty, and Ive talked to the
  seller, but I don't have the time to send it for repair (no laptop replacement in the meantime).

  Is it possible to get a new key and replace it myself? I know that some other laptop producers do the same thing,
  rather than use a lot of time on repairs, if they are too simple.

  Concerning

  John Reyes

  [email protected]

  Hello

  Well, it's very easy to replace the keys.
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20727&MessageID=76283

  But if the key is broken you will need to replace the entire keyboard.
  To remove the keyboard, you have to remove the cover plastic thinking above the F keys.
  Under this coverage, you will find 2 crews secure the keyboard
  Remove the two screws and remove the cable from the flat keyboard which is connected to the motherboard.

• How to find and remove special characters in the file name?

  I have a files in various Windows Server 2003 with a special character in its name, which cause problem with backup software, I Don t know which character is because in the browser that they do not appear and command line, they are listed only as a mark of the interrogation and for this, I Don t know how I'll find and delete then.

  Thank you.

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to find? in a text of the view (definition) in all schemas

  Hello
  
  Version of DB Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  OS RHES 5U2
  
  I would appreciate if someone can tell me how to get a list of all views in the database that contains? in the text of the view definition.
  
  I tried with the two DBA_VIEWS and ALL_VIEWS to aid after the query, but it returned error.
  
  SELECT MASTER: '. ' || VIEW_NAME
  OF ALL_VIEWS
  WHERE THE TEXT LIKE ' %? %'
  AND the owner not in ('SYS', 'SYSTEM', "SYSMAN", "GENERAL", "OLAPSYS", "MDSYS", "CTXSYS")
  ORDER OF OWNER;
  WHERE THE TEXT LIKE ' %? %'
  *
  ERROR at line 3:
  ORA-00932: inconsistent data types: expected NUMBER got LONG
  
  
  SELECT MASTER: '. ' || VIEW_NAME
  FROM DBA_VIEWS
  WHERE THE TEXT LIKE ' %? %'
  AND the owner not in ('SYS', 'SYSTEM', "SYSMAN", "GENERAL", "OLAPSYS", "MDSYS", "CTXSYS")
  ORDER OF OWNER;
  WHERE THE TEXT LIKE ' %? %'
  *
  ERROR at line 3:
  ORA-00932: inconsistent data types: expected NUMBER got LONG
  
  Thank you

  WHERE THE TEXT LIKE ' %? %'

  The TEXT here is a LONG data type, you cannot use it in an expression.
  You can do this:

  SQL> select count(*) from user_views where text like '%OPRD%';
  select count(*) from user_views where text like '%OPRD%'
                                        *
  ERROR at line 1:
  ORA-00932: inconsistent datatypes: expected NUMBER got LONG
  
  SQL> create table myviews (view_name varchar2(30), text clob);
  
  Table created.
  
  SQL> begin
    2  for i in (select view_name,text from user_views) loop
    3  insert into myviews values (i.view_name,i.text);
    4  end loop;
    5  end;
    6  /
  
  PL/SQL procedure successfully completed.
  
  SQL> select count(*) from myviews where text like '%OPRD%';
  
    COUNT(*)
  ----------
         136
  
  SQL>
  

  Nicolas.

• How to find and replace in the Javascript code?

  Hi all!

  I hope that this proves to be an easy question! We have recently updated several forms (about 50 of them) to change a set of names of fields by the requirements of the customer. However, it turns out that one of these fields is a key field and it is referenced in one or more places of JavaScript in the PDF.

  I would choose the option to edit all of the scripts that would give me a large document with all the Javascript code in the PDF in Acrobat 6. I could then do a find/replace on the code and save it. Now, using Acrobat 9 Pro, I don't know something like that. Please don't tell me that I have to search in all fields in different form and PDF objects to find all the pieces of script related to objects or events! I'm really, really hoping that there is an easier way to do it from right now, I'm ideas and really do not want to have to sift through all the objects in more than 50 PDF documents.

  Thanks in advance for pointing me in the right direction!

  Go to the Advanced section - Document Processing - Edit Document JavaScripts...

  (or something similar, don't have it in front of me at the moment)

• I have a file of corr upt and said to run the chkdsk utility. How to find and run this?

  System Restore no longer works, computor very slow in opening.

  b

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• How can I find and replace the xml tags?

  Hi, I am using xml in my workflow and want to be able to remove some tags if they contained particular text.

  Here is an example of the xml struct...

  < Entry >

  < name > DEFAULT < / name >

  < such > default < / such >

  DEFAULT < address > < / address >

  < / Entry >

  I use this initial structure to define paragraph styles to follow when you import the xml data.

  This leaves DEFAULT in place everywhere where an entry is not any content of this field.

  I want to be able to import my XML and then run a script that deletes tags that include by DEFAULT, - I need to the xml tag to remove not only the text, if I do a normal find and replace will remove only the text not the tags that is causing problems with style. I also want to remove the end of para/return (^ p) that I placed at the end of the line. So it would be the same opening editor mode and removing content, tags + hard back in there, but I want to automate the process...

  So I think that's what I'm looking for in each case

  "< name > DEFAULT < / name > ^ p.

  and I want to replace it with nothing.

  Is this possible in a script (ideally javascript)?

  I have a little knowledge of javascript, but don't know how to search for and target this kind of string in indesign...

  using indesign cs5

  Thank you very much

  Hello

  Script should do it in two steps:

  1 find all occurrences of that is ' > by DEFAULT.<>

  2 delete the whole paragraph which is a found_text container.

  For example, in this way - JS - (a textFrame filled your text must be selected):

  var mStory = app.selection[0].parentStory;
  app.findTextPreferences =  null;
  app.findTextPreferences.findWhat = ">DEFAULT<";
  var myF = mStory.findText();
  var count = myF.length;
  while (count--)
       myF[count].paragraphs[0].remove();
  

  Rgds

• Find and replace

  Hi all

  One of my colleague working on a program with more than 100 cases of the same enum (without type def as a constant knot, of control and property).  It must update the enum (surprise), so he needs to make the change on all the enum 100 +.  I showed him how to do a type-def, and he could replace the 100 + with new enum type FED.  It's a lot of work manually, so I tried to use search and replace, but it won't let me choose the new enum type-def we want to replace the enum 100 + with.  If I do find and replace, I can exclude the property node?  If I, the field node would get linke for the new enum?

  What is the best way to accomplish this task?

  jyang72211 wrote:

  1. I was able to find all the constant enum and replace them with something else.  Is it true that I can replace only with similar data type?  For example, I can't replace a constant enum with an add function.  I tried to change the enum to the ring to digital and numeric Enum.  They worked, but sometimes there is a glitch, where I have to find me and replace twice to make it work.  Have you seen this before?

  Yes, there are replacements that don't work because they are not simply doesn't make sense.

  2. I was able to easily find the enum constant, but for controls of the enum, I needed to go under others-> terminal façade.  I found the controls, but there is a slash sign beside him.  I assumed that meant cannot be operated.  I tried to replace the enum with some other control, and I can't.  How do you do search and replace on a control of enum (not constant).

  The search and replace has some limitations, and you met a. You can do what you want to do by the script. See attached example, which replaces the controls that have a label that starts with 'cc' with the typedef. The criteria for which controls replace yours. I just chose that according the example VI that you have provided. Modify if needed.

• Find and replace support, several variables

  Hello world

  Im trying to find all of the URLS in my code that starts in a particular way, but have a number at the end, see the examples below

  < a href="/example/examplefolder/enquiry.asp?pid=123" >

  < a href="/example/examplefolder/enquiry.asp?pid=485" >

  < a href="/example/examplefolder/enquiry.asp?pid=284" >

  and replace them with a url, see the example below

  "< a href="/example/examplefolder/default.asp ">

  How can I use Dreamweaver find and replace to do this through my entire Web site?

  So far, I don't know how to find one thing and replace it with another, rather than find the variables and replacing them with something.

  Thanks for your help with this!

  To find and replace this model: underscoreNumberUnderscore:

  Find: _\d_

  Replace: the value that you want to use (if it's nothing, leave the field blank)

  In Options, select use regular expression.

  This assumes that the number is a single digit. If you have numbers that have single or multiple numbers, change the value to find this:

  _\d+_