How to find modules using a specific table in the designer 10 g?

Similar Questions

• URGENT: Need to flashback table, how to find SNA for quite some time before the update that's happened?

  Hi all

  I have a new database 11G, I haven't used before flashback, but my retention time is a day... I have once the developer did a massive update to a table to corrupt.

  How can I find the RCS for this time so I can try this table of flashback?

  Thank you

  Cayenne

  Thank you.. I also found that it works:

  SQL > select timestamp_to_scn (to_timestamp('20140103152000','YYYYMMDDHH24MISS')) SNA double;

  SNA

  ----------

  98344246

  Although does NOT work all the time. But that's just what Oracle when you give him a timestamp to flashback to: it converts the timestamp of a SNA and then restores the data based on the SNA.

  See table of Flashback in the language SQL doc

  http://docs.Oracle.com/CD/B28359_01/server.111/b28286/statements_9012.htm

  TIMESTAMP CLAUSE

  Specify a value of timestamp corresponding to the point in time to which you want to return to the table. The expr must evaluate to a valid time stamp in the past. The table will flash back to a period of about 3 seconds to the specified timestamp.

  This precision "3 seconds" is because of this conversion to SNA - Oracle uses its internal table.

  YVERT is accurate, if you know, but you typically do not have.

  Read and consider these warnings in app dev guide advanced

  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28424/adfns_flashback.htm

  Guidelines for Oracle Flashback Query

  • If a potential error of 3 seconds (maximum) is important for Oracle Flashback Query in your application, use a SNA instead of a timestamp. See guidelines on Oracle Flashback technology.

  . . .

  General guidelines for Oracle Flashback Table

  . . .

  • For querying the latest data at a specific time, use a SNA. If you use a timestamp, questioned real time can be up to 3 seconds before the time you specify. Oracle database uses the SNA and assigns them to the timestamps to a granularity of 3 seconds.

  For example, suppose values SNA 1000 and 1005 are mapped on the timestamps 08:41 and 08:46, respectively. A query for a moment between 08:41 and 08:45:59 is mapped to the SCN 1000; an Oracle Flashback Query at 08:46 is mapped to the SNA 1005.

  By reason of this time-to-SNA map, if you specify a time slightly after a DDL (such as a table creation) Oracle database operation can use a SNA which is located just before the DDL operation, causing the error ORA-1466.

  . . .

• How to find a value in any column of the table - essentially a search

  Hi guys,.

  Thanks in advance for your help.

  I'll try to find a value in any column of the table? How can I do?

  An example of value would be "FEDERAL."

  Using Oracle 11 g and SQL Developer.

  Thank you

  It's a question that is asked in the past several times (but not recently from what I remember).

  Michaels has provided in the past, solutions which are quite clever, just using SQL...

  10g of solution

  Michaels > var val varchar2 (5)

  Michaels > exec: val: = "Sub".
  PL/SQL procedure successfully completed.

  Michaels > select distinct substr (: val, 1, 11) "keyword."
  substr (table_name, 1, 14) "table."
  substr (t.column_value.getstringval (), 1, 50) ' / value of the column.
  CLO.
  Table
  (xmlsequence
  (dbms_xmlgen.getxmltype ("select" | column_name))
  || 'from ' | table-name
  || ' where upper (')
  || column_name
  || ') as superior (' %' |: val)
  || '%'')'
  ) .extract (' LINES/rowset / * "")
  )
  ) t
  -where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'SERVICES')
  order of the "Table".

  11g upwards

  SQL > select table_name,.
  column_name,
  : search_string search_string.
  result
  from (select column_name,
  table_name,
  "ora: view("' ||) " table_name | "") / LINE /' | " column_name | "[ora:contains (text ()," %' |: search_string | ")]. (%») > 0]' str
  CLO
  where table_name in ('EMP', 'Department')),
  XMLTable (columns str result varchar2 (10) path '.')
  /

  TABLE_NAME COLUMN_NAME SEARCH_STRING RESULT
  ------------------------------ ------------------------------ -------------------------------- ----------
  DEPT                           DNAME                          es                               RESEARCH
  EMP                            ENAME                          es                               JAMES
  EMP                            JOB                            es                               SALESMAN
  EMP                            JOB                            es                               SALESMAN

  4 selected lines.

• How to find hidden using the Finder folders

  Really frustrating!  I want Finder to display the hidden files and folders.  I tried everything I could find in this forum and others to do so.  That's what I tried (many times):

  Tip #1:

  Finder > go hold the option key

  If you need to continuously show

  Open your Finder > go > home folder and then order J to see the display options

  

  Then, restart Finder

  Suggestion #2:

  Show hidden files Mac OS X El Capitan:

  1. Click the "Finder" icon in the dock of your Mac.
  2. Open a Terminal. Terminal is a utility that allows access to the operating system OS X El Capitan. It can be opened in one of two ways:
  3. Select 'Applications' on the left side, click "Utilities" and then double-click "Terminal."
  4. Open the launch of OS X El Capitan area. Click on the "Utilities" folder Then, double-click "Terminal."
  5. Enter the following in the Terminal window, and then press "Enter": "defaults write QLEnableXRayFolders AppleShowAllFiles YES."
  6. Exit the Terminal program. This can be done by selecting "Quit Terminal" in the Terminal.
  7. Restart the Finder. Your new setting will take effect after you restart the finder. To do this, hold down the 'Alt' key and click or with two fingers on the Finder icon. Select "raise".

  None of them work for me.  :-(  I use Macbook Air and El Capitan Version 10.11.4

  Do not include the quotes.

  write QLEnableXRayFolders AppleShowAllFiles YES

• How to configure VPN remote access to use a specific Interface and the road

  I add a second external connection to an existing system on a 5510 ASA ASA V8.2 with 6.4 AMPS

  I added the new WAN using another interface (newwan).

  The intention is to bring more internet traffic on the new road/interface (newwan), but keep our existing VPN using the old interface (outside).

  I used the ASDM GUI to make changes and most of it works.

  That is to say. The default route goes via (newwan)

  Coming out of a VPN using a site to character the way previous (out) as they now have static routes to achieve this.

  The only problem is that remote incomming VPN access Anyconnect do not work.

  I put the default static route to use the new interface (newwan) and the default tunnel road be (outside), but that's the point is will not...

  I can either ping external IP address from an external location.

  It seems that the external interface doesn't send traffic to the - external interface (or at least that's where I think the problem lies). How can I force responses to remote VPN entering IPS unknown traffic to go back on the external interface?

  The only change I have to do to make it work again on the external interface is to make the default static route to use external interface. Calling all internet traffic to the (external connection) original

  Pointers appreciated.

  William

  William,

  As it is right now that you will not use the same interface you have road to terminate remote access unless you know their IP addresses by default.

  In one of the designs that I saw that we did something like that.

  (ISP cloud) - edge router - ASA.

  The edge router, you can make PAT within the interface for incoming traffic on port udp/500 and UDP/4500 (you may need to add exceptions to your L2L static) of the router. It's dirty, I would not say, it is recommended, but apparently it worked.

  On routers, this kind of situation is easily solved using VRF-lite with crypto.

  M.

• How to add channels to a channel table in the display panel in the script

  Hi all

  We try to put in place a review tool video using DIAdem, and we want to fill the results which have already been analysed in a Panel. This means populating a channel table in this Panel with the necessary data, but we cannot find a way to add strings to a table in the script. It seems that it should be very simple, but we can not find!

  Thank you

  Peter

  Hi Peter,.

  Yes, it's simple. You prepare your VIEW with the channel table layout and use the add on the columns collection method.

  The command might look like this:

  VIEW. Sheets (1). Areas (1). DisplayObj.Columns.Add("myGroup/myChannel")

• How to find name and instnace host names in the CCR

  Hello
  
  How to find the name of the instance of the RAC and the hostnames in RAC environment.
  
  Thank you

  You can find the information using sqlplus, connect to one of your RAC instances, try with it, hope this helps.

  SQL > select instance_number, instance_name, status of gv$ instance;

  INSTANCE_NUMBER STATUS INSTANCE_NAME
  --------------- ---------------- ------------
  OPEN 1-A01
  OPEN 6 A02
  OPEN 5 A03
  OPEN 4-A04
  OPEN 3 A05
  OPEN 2 A05

  6 selected lines.

• How to subtract th position of a table from the position of the i - th another

  Hello world

  In my program, I have a subract the other table. It should be like x - y (i)

  Can someone explain to me how can I make sure I'm subtracting ith value of table 2 of l'i-ieme value in the table one?  No, for example, x - Y (i + 1)?

  Thank you

  In LabVIEW polymorphism of the substrate function we will exempt you directly from one table on the other. If I understand you correctly, this will be what you want.

  Also seems that you are new to the concepts: take a look at the posibillities of automatic indexation of the loops for.

  Felix

• Make a request to use a specific adapter for the internet. Question

  Hello, I was wondering is there a way to make specific application to use a specific Internet adapter?

  I had three devices. Two wireless devices and an Ethernet.

  Well to put it in terms I want to choose which programs use adapter. For example, I want my browser to use wireless, my Messenger to use the other device on the Ethernet device and wireless, Skype.

  Is there an app to allow me to do this. Maybe some application tunneling or something. Maybe I can manually config windows to do this. If not, I can use Loopback Microsoft Map to loop and their tunnel. But there might be something that can already do what im asking the subject.

  I'm sorry, but there is no way to assign a program to a network card (or vice versa). Boulder computer Maven
  Most Microsoft Valuable Professional

• How to find an artist by drawings only, excluding the pictures? [was: images from adobe]

  If I find an artist that I love, how can I find his images and exclude the photographs?  Say I love the designs, but not need photos.

  I havne't has managed to do this, but it's probably possible?

  Thank you. I'm a newbie, so I apologize if it's obvious.

  I don't think there is a way to filter the images of the artist by format. One would think that it would be a logical feature to have.

• How to restore deleted records in another table in the oracle 10g database...

  Hi all

  I want to restore deleted records in a particular table in the other table

  Suppose that:

  I make a request

  delete from emp

  where deptno = 30;

  now, I won't restore deptno = 30 records in the other table, let's say table emp1

  can someone let me know how to do it?

  Thank you...

  This is what flashback query is for:

  orclz > conn scott/tiger

  Connected.

  orclz > select count (*) emp;

  COUNT (*)

  ----------

  14

  orclz > delete from emp where deptno = 30;

  6 deleted rows.

  orclz > commit;

  Validation complete.

  orclz > create table deleted30 in select * from emp to the timestamp (systimestamp - 5/1440) where deptno = 30;

  Table created.

  orclz > select count (*) in the deleted30;

  COUNT (*)

  ----------

  6

  orclz >

• 1013 JDev how 2 display number on a specific attribute on the output text table?

  Page 1: I created a form of parameter with 7 top search criteria fields and table of results of search or a Table read-only ADF downstairs. The setting is based on the application of top link where each parameter is as the corresponding field in a table and works very well!
  
  For Page 2: I want the page looking at the same research, same parameter table of search results albums and even down with the addition of display also count on a particular area so that when someone enters data into the fields of setting up, he would always check the table and show the results of all fields, but in the last column do a count on this field (totally separate from the default number of records to search entire JDEV).
  
  Is it possible to create as a count or count (*) function at the level of the line of text out? I tried to create a view based on a Select sql statement a, b, c, d, count (e) table, group by a, b, c, d, e and when I dragg this object that contains this sql statement from the data control panel, it gives me the correct regulation of all areas, including the last column to display the number of records for this field , but together does never change based on what has been entered in the parameter, it is as if he is not yet connected to it. For ex: I want to display the number of all students within the setting of the East region, on the contrary it shows total number for all regions, not specific to East.

  Hello:

  I worked on a very simple application form ADF search against table Scott.emp in the Oracle database.
  Now I see what you mean. The idea is probably you shouldn't directly drag and drop control of your data: directly in your jspx as «ADF search form» Here are the steps:
  (1) create your entity object, the view object and I'm in the model layer; (You have already done this, you do not have entity and your view may come of TopLink request;)
  2) double-click the View object in your project of "model"; Add a connection variable: type Bind_deptno Number. It's read in a number of dept on the search engine;
  (3) change the SQL statement of the Emp View object on the same place as 2); WHERE Emp.Deptno = NVL (: Bind_deptno, Emp.Deptno) this indicates ADF if the binding variable is bound to a value
  then use this value, or if it is null, just ignore it. That's the tricky part;
  (4) create a new JSF called "Search.jsp', which will be the search engine;
  (5) from App Module, select EmpView1 (EmpView is updatable, EmpView1 is read-only, but it is not serious on the research plan), drag and drop the EmpView1 on your
  Search.jsp as an array of the ADF (not a search ADF form). This ADF table then displays the result of the research;
  (6) of the control Module of the App, go to EmpView1 data, drag and drop a "ExecuteWithParams" on your search engine like settings-> parameter ADF
  Form, this will tell ADF you want to set the variable binding as an executable looking for shape parameter.
  That's all! and you're good to go. Do the same for the other variable binding (you have 7 search criteria, so you have set 7 bind variable by using the same logic here.
  Good luck and don't forget to mark my answer as "correct" it to make me a few partitions.

  Best regards
  Alex IBE

• How to find storage used by a particular user.

  Is someone can you please tell me how I can find all the storage space used by a particular user?

  Hello

  I'm not sure that understand the question.

  If you want to know what areas of storage user SCOTT uses to store its tables and indexes:

  SELECT DISTINCT  tablespace_name
  FROM    dba_extents
  WHERE   owner   = 'SCOTT'
  ;
  

  Published by: Frank Kulash, March 23, 2010 15:14

  Now that I see the Oradba response, I think it is better to use dba_segemnts; It will be more effective.

• How to find a complete product specification of Lenovo serial number?

  I buy a lot of Lenovo used equipment.

  The selling company doesn't have a detailed specification of all.
  They gave me the serial number of equipment.
  How do I get the configuration complete a product and its internal components?
  Is it possible to Lenovo site?

  Here is a list of example of series below

  XXXXX

  Comment to Moderator: Order number deleted to protect members of wrongdoing.

  Ok! It works and it has me so much help. Thank you.

• HP pav a 23 g while: how to find and use my webcam on my hp desk top 23g

  I can't find and or use my web cam can someone advise please how locacte or what softwear I need an i tried cyberlink and ucam on my system and can't seem to find the web cam option

  Thank you

  Hello

  Thank you for your response. Here is a troubleshooting document I've found with a few steps you can try, which could solve the problem.

  http://support.HP.com/us-en/product/HP-Pavilion-23-G300-all-in-one-desktop-PC-series/7477723/model/7729524/document/c01896811/

  Good luck!!

  To say thank you for the answer, click on the thumbs up icon below.
  If this solved your problem, please help others by choosing the solution provided.