How to find page sizes in one document with different page sizes

Similar Questions

• How to find the size of the semantic model

  Hi all
  
  Please can you tell me how to find the size of the semantic model.
  
  Thank you
  INDU

  Hi Indu,

  A couple of several things:

  1 we still need an application, in order to account for the storage of the Table in the Application

  This query gives you the name of application table

  Select the table table_name from mdsys.sem_model$
  where model_name = '';

  This will give you the size in MB

  Select semmodel.table_name, dbaseg.bytes/1024/1024 MB
  of mdsys.sem_model$ semmodel, dba_segments dbaseg
  where semmodel.table_name = dbaseg.segment_name
  and semmodel.model_name = '';

  2. If the model is the only one of the semantic network, you can get the space used by the table of $ RDF_VALUE using this query

  Select bytes/1024/1024 MB dba_segments where nom_segment = '$RDF_VALUE ';

  If there are several models, this space is shared between all of them.

  Kind regards!
  Jorge

• How to find the size of the virtual server?

  Hello

  We intend to pass our applications 4 virtual servers has 2 physical servers. In this process, we need to identify the size of the current virtual servers to use as a starting point to configure or add the size in physical server. can anyone provide information on whats stats to be noticed and how to find the size of the current virtual servers?

  Thank you

  Hi Sekhar, there.

  in general, it is a fairly complex task if you want to size the new platform correctly, i.e. not to oversize it and have very low use below, i.e. spend too much on equipment.

  In fact, it's the first thing to consider the level of use of the new platform. Most likely your organization (HW and infrastructure) has targets to a minimum. optimal and maximum usage levels.

  In the case where you do not have this as a starting point, and then you continue with load average and the current peak (CPU, RAM, NW). To these basic lines, you can use the statistics of WLS Admin Console, where the use of CPU and memory statistics are presented since the server was last started. For more detailed statistics, you can use WLDF to capture measures key at regular intervals, and then base your analysis of these data.

  Finally and above all, the size of FS, but I've seen some comments above related to the size of the FS.

  HTH,

  A.

• How to find the size of the table?

  Hi all

  Can anyone suggest how to find the size of the table? I had a few (15272 selected lines) on the name of "CMPT_" How can I check only 'CMPT_' size tables?

  
  

  
  

  
  

  
  

  Please someone help give the SQL query to run.

  
  

  Thanks in advance.

  
  

  Vincent
  

  madala03 wrote:

  Hi thanks for the reply

  I'm out like below

  SUM(BYTES/1024/1024)

  --------------------

  25383.25

  But how to check all the name of tables CMPT and their sizes?

  Select nom_segment, dba_Segments sum(bytes/1024/1024) where nom_segment like ' % CMPT GROUP BY nom_segment;

• How to find the size of the partitioned tables?

  How to find the size of the partitioned tables?

  Select nom_segment, sum (bytes) /(1024*1024) 'Size in MB' from dba_segments
  where owner = 'owner name' and segment_type like '% PARTITION % '.
  Group by nom_segment;

• How to find the size of the text string...

  Hi friends,

  How to find the size of the text, in KB or in bytes or MB, I have a text box control, when I type a text in do I find the size of the text that is entered control.please of entry help very urgent...

  Thnaks

  Balu-

  Hi David,

  Nice Solution, but I think that it will not give the exact size of the string for a particular case where the string contains UTF string as a single letter format can exceed more than 1 byte.

  So I think it should be modified as:

  private function getTextSize(value:String): String

  {

  var div_by:int = 100;

  var sze_is:String = 'KB ';

  var len_is:int = getUTFLength (value); now the length is actually measured, regardless of the format of the text

  If (len_is > 1000000)

  {

  div_by = 100000;

  sze_is = 'mb ';

  }

  Return(string(math.round(len_is/div_by)/10)+sze_is);

  }

  private void getUTFLength(value:String):int
  {
  var byteArray:ByteArray = new ByteArray();
  byteArray.writeUTFBytes (value);
  Return CharArray.Length;
  }

  Concerning

  -Vikash

• How to find the size of the downloaded image on a column of type blob in a table?

  How to find the size of the downloaded image on a column of type blob in a table?

  Vidya,

  You can use the built in function dbms_lob.getlength to get the length (size) of a LOB column or a bfile type.
  Check out this link.

  http://download.Oracle.com/docs/CD/B10501_01/AppDev.920/a96612/d_lob2.htm#1008995

• How to find the size of the scheme with or without fragmentation

  Hello Sir,
  How to find the size of the scheme with or without fragmentation?

  to find all of the bytes used by a schema, you can add the bytes for the owner of the dba_segments views.

  for fragmentation, I guess you want to know about the space left between the segments.

  finding depends on the design and standards of your database.

  Each scheme has its own storage space? If Yes, then you can take the total space used in storage and then subtract the number of the dba_segments.

• Help! Resizing the different documents with different resolutions?

  Hello!

  Please help me with my situation:

  I tried to do an action that will shrink by 1 inch to all parts of my document (the document had 12 x 36 inches) and, hopefully, to other documents.  I don't want to crop the image, I want to just resize the entire image to 10 x 24 inches, leaving a transparent border of 1 inch (the grey and white checkerboard) to my document. I started to resize manually, but it was a lot of time so I tried to take action, as I said above. I expected that he would spend a proportional 1 inch upper, lower, left and right other documents, but he did not. Any procedure for that happen in different documents with different sizes and resolutions?

  PS: All the documents I will resize itself would be finally printed (I don't know if it would help).

  Thank you very much for your help!

  Read the Action reinforced via the script Photoshop functions.txt file it tell you the function run each script.  Most script will retrieve things like the width and height of thay are used all the time. Look at the file size of the JSX file. Read more small there's no much too small should be easy to read and understand.  Orient.jsx and RotatePortrait.jsx will for sure get the width and height and SaveAndRestoreResolution.jsx will get the resolution.

  var orig_ruler_units = app.preferences.rulerUnits;

  app.preferences.rulerUnits = Units.PIXELS;

  get the height and width in pixels

  var width = app.activeDocument.width;

  var height = app.activeDocument.height;

  var RES = app.activeDocument.resolution;

• How can I send docs to multiple signatories with different addresses on sign of Echo?

  How can I send docs to multiple signatories with different addresses on sign of Echo?

  Hello

  In EchoSign, you simply have to add e-mail addresses to each signatory in the box 'To' and set the saved order. If you have to close, you must enter your last e-mail address and check the box "I need to sign. The shape that you send must have signature of blocks for each signatory but apart from that, there are other special rules or the necessary implementation. If you continue to experience problems try this, detail your problem here and I'll do what I can to help.

  See you soon!

  EchoSign-Rob!

• How to find the size of the Document

  Is it possible to find the size of the document after cropping.

  I discovered that saving the file for the web will show the size of the file.

  Are there other alternatives

  Firefox,

  Window > Document Info > Document tells you the size of the artboard (it is the importance of the harvest in new versions); in older versions, you can object > crop area/guides > release to see the W and H of the importance of the harvest and oppose > crop area/guides > Make or just Ctrl / Cmd + Z to restore.

  No relevant information you know: transform it and info palettes/panels show the objects selected as W and H (Bounding Box) size.

• How to find pages without an attached template (500 pages, most have a template attached, but some do

  I have a rather disorganized site, where most of the pages are associated with a model, but many are not. I know how to find all the pages with each model, but I don't know a good way to generate a list of all pages that don't have any style. The only way I can think to do is make changes to each of the models and sort the list of update files. Is there an easier way?

  Woud you use a regular expression search - try this:

  Search (in the source) for the whole site (using regular expressions)

  \<\ ody\="">
  \<\ tml\="">

  A model of child page will always have this code - end

  You are looking for pages that do not have this end code.

• How to find the size of the list box

  Hello

  I have a list with 4itmes in that box. I want the list box size, just to busy data in the listbox. Is it possible that we can find the size of the list box? Help, please.

  Here you go

  

• How can I view more than one document at a time?

  I had an upgrade for some reason yesterday, and now I can see only one document at a time? I need to be able to view more than one side by side?

  With the new updates, Acrobat Reader uses default interface with tabs (like most browsers).

  To view two documents side by side in different windows (rather than the different tabs), just drag a tab out of the window of the player and it should become a new window!

  If you want to permanently disable the interface to tabs, you can uncheck "Open documents as new tabs in the same window" in the General preferences (go to Edition |) Preferences).

• How to find the size of the plsql packages

  Oracle: 10.2.0.4
  Operating system: Solaris
  
  Question: DB has about 2000 packages that are in development mode. In the case where if we want to find the size of the package what is the mechanism of the dictionary tables. ?
  
  Is there a way, that the size is stored in the tables of the dictionary?
  
  PL. Let me know.

  Hello
  Have you checked PARSED_SIZE column in the USER_OBJECT_SIZE data dictionary view, in my response above?

  concerning