How to find space flashback

Similar Questions

• How to find spaces in a file extracted in order to trigger a rule MOVE_IT

  In the studio I'm setting a field of variable on a section and I want to learn from my file extracted using a simple rule of MOVE_IT.

  I'm going to pull information from a record that has spaces columns 10-14.  How to enter the required information in the DATA field to make the request?

  For example, if I pulled the information from a record who had 'XXXXX' in column 10-14, I know that the DATA field would be 10, XXXXX

  I can't figure out how to find space at a given offset.

  Thank you.

  As you know, normally spaces are considered as a delimiter in the search string and therefore would be ignored. Doing a search for "1, ABC, 10, ' would have been a mistake that it would look like had not provided you the final search key. However, there may be a way that you can accomplish this research by using the feature 'or' without a 'or '.

  If a search key begins with open paren, it is assumed that you will provide several possible matches. For example, you could do something like this: 1, ABC, 10,(XXX,YYYY,ZZ). That said, find the line of the snippet that starts with ABC in the first column and then a XXX or AAAA or ZZ from 10th column.

  This method 'or' uses commas to separate possible matches and not break on the spaces as a normal search mask. Therefore, you can actually do: 1, ABC, 10, (de) - where I have 5 spaces between the opening and closing paren. Note that I did not put in a comma because I only had one criteria. The system doesn't care what and will simply accept what is between the parens and pick him up.

• How to find space in windows xp

  I deleted and defrag'd.  No free space has been added.  How to find the workspace file to remove Windows xp

  Tuesday, December 7, 2010 18:19:05 + 0000, bbshot wrote:
   
  > I deleted and defrag'd.  No free space has been added.  How to find the workspace file to remove Windows xp
   
   
   
  Deleting the files, move them to the trash. It is not everything
  additional space available.
   
  Defragmentation rearranges your hard drive. There is not any extra
  available space.
   
  Empty the trash you will get an extra space. There are
  various other things you can do to get extra space, but
  that everything you can do is just a stopgap measure. Soon there will be
  find yourself in the same situation.
   
  The only real solution to the problem is to buy a big plus one hard
  in car or another. Fortunately they are very cheap now.
   

  Ken Blake, Microsoft MVP

• How to find space in a Tablespace?

  Hello

  I have limited access to the objects in my database (do not have access to several tables).

  I have 300 GB in size in my table space that allows me to create my objects.

  Now, I want to know how much this size of table space allotted to me have exhausted. I don't have access to dba_data_files and dba_segments.

  Is there a way out for me? Could someone show me a way please?

  This query will give you the necessary information, but it uses DBA tables.

  SELECT B.TABLESPACE_NAME, TBS_SIZE SIZEGB, A.FREE_SPACE FREEGB

  from (select nom_tablespace, round (sum (bytes) / 1024/1024/1024, 2) as free_space)

  from dba_free_space

  GROUP BY TABLESPACE_NAME),

  (select tablespace_name, sum (bytes) / 1024/1024/1024 as tbs_size)

  from dba_data_files

  Group by tablespace_name b)

  where (+) a.tablespace_name = b.tablespace_name;

  However, you said that you are aware of the details of your tablespace then the above query can be modified to get the free space in your tablespace. Now I use user_frees_space and not dba_free_space. In general the user tables are and must be accessible to users.

  Select nom_tablespace, round (sum (bytes) / 1024/1024/1024, 2) as free_space

  of user_free_space

  where nom_tablespace = "your name of the tablespace.

  GROUP BY TABLESPACE_NAME;

  Ishan

• Yosemite zero space. can I just remove the "Recently deleted" - photos and how to find them?

  Yosemite zero space. can I just remove the "Recently deleted" - photos and how to find them?

  That will help, go to Photos > file > show recently deleted > clear everything up right

  Also:

  http://pondini.org/OSX/diskspace.html

  This app will tell you better that uses storage so you can remove

  https://www.OmniGroup.com/more

  Make sure that you also empty the trash

• How to find the largest contiguous free space in windows xp

  Hi, I have two machines, one running Win7, XP running.  I know how my highest contiguous free space is great under w7, using "defrag c: - one" in a prompt "administrator-started":

  C:\Windows\System32>defrag c: - one
  Microsoft Disk Defragmenter
  Copyright (c) 2007 Microsoft Corp.

  Citing analysis on OS (C :)...)

  The operation completed successfully.

  Post report of defragmentation:

  Volume information:
  Volume size = 283,40 GB
  Space free = 60.49 GB
  Fragmented space total = 0%
  More large size of free space = 46,29 GB

  But, by using the same command in XP does not have the same statistics (I tried 'defrag c: - a - v' for a detailed report, but it does not always give this stat.)  Anyone know how to find out what is the largest contiguous amount of free space on a XP computer?

  TIA

  K

  Hey man follow my link http://us.generation-nt.com/answer/how-find-largest-contiguous-block-free-memory-help-27343152.html , and it explains how to find this information. so, this should be your answer

• How to find a space using grep?

  Hello

  I tried several ways to find a space (SPACEBAR) at the beginning of a paragraph using grep. I can get to find any white space at the beginning of a paragraph, but not only a space (SPACEBAR) specifically? Anyone know how to find?

  Thank you

  Gary

  ↑ followed by a space. There is no special code for a single regular space.

  If you want to see where you have entered one or more spaces, use this code to enter a space character:

  \x{20}

• I would like to know how to double space on the notebook in a paragraph, how to register and send to another computer and number pages? can anyone help? Thank you!

  Please someone help I'am new to the computer world and I would like to know if anyone out there can help understand me how to double space on the workpad words and how I can save and send it to another computer for printing. Can also how to number the pages? And also I can use see fate on this workpad vista? Thank you.

  Joseph Monteleone,
  Thank you for visiting the Microsoft Answers community forum.

  Notepad is a very limited text editor, so you can't really do a lot of formatting.  Double-spaced, the only way is to put two 'statements' at the end of each line.  You can format the font, and set the page layout for printing, but apart from turn, wordwrap who speaks all the formatting, you can do it.

  To save a file, just go to file, save money, find the folder you want to save it in (don't forget remember where you saved it), name, and click Save.

  To send it to another computer on your network, you can choose the drive you want to move on the network and copy and paste, or drag and drop it.  Or you can go to the computer that you want to put on, navigate to the drive on your computer where you saved, and then copy and paste or drag and drop it.

  Let us know if you need more information.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to find your ip address

  How to find your IP address wireless on a toshiba satellite C660/c66OD?

  You can also open a run window (Windows Logo key + R), type cmd /k ipconfig/all (notice the three spaces) and press ENTER.

• I somehow lost the Recycle Bin on the desktop and can't find it in the search module, how to find it or get it back

  Don't know what happened but I deleted a bunch of things and tried to empty the trash and he sought on the desktop and it wasn't there.  Could not find it in the start search box.  How to find it or get it back?

  Don't know what happened but I deleted a bunch of things and tried to empty the trash and he sought on the desktop and it wasn't there.  Could not find it in the start search box.  How to find it or get it back?

  Right-click in an open office space > click Customize > click on Change desktop icons > put a check mark in the trash box > Ok when finished.

  

• How many TEMP space needed for datapump import?

  How exactly can we predict how TEMP table space is required before starting an import data pump (via impdp)?  I need a way to predetermine this before you start the import operation.  It is my understanding that data pump import, temporary table spaces are mainly used for the construction of indexes among other operations.

  Such a formula assumes that you are not a multi-user system.  This could be essentially true, if you assign their temp temp abusers, or have a few batch series DW loader.

  Since you're probably a multi-user system, it may be best to figure it out empirically, then set limits to limit runaway sessions.  One way to do that is to make autoextend with a limit based on your disk space, let the system run for awhile, then disabling autoextend, apply the ROT of X 2.  But it can be so many site and specific application, it is difficult to say what is the best advice for you - unless you find someone with a similar system with the app.

  Many of us just test to see, for the import.

• How to find the last pasted paragraphs FMP?

  I'm sticking FMP several objects at once in a file (a file of changes to the sections containing the changebars) in the main text flow. I want a separator line to go at the end of each pasted section, so I try to insert one after the paste operation. But instead of a line between each section, all lines are added at the end of the file, after all the sections. So if there are 3 glued sections at the end of the file are three lines. My code is below, do you know how I could fix this?

  Thank you, Mark

  function copyPasteChanges (doc, chgRange) {}

  Select the section with changebar and copy it.

  doc. TextSelection = chgRange;

  doc. Copy();

  Prepare for the changes doc and paste there the modified section.

  var firstChgPgf = changesDoc.MainFlowInDoc.FirstTextFrameInFlow.LastPgf;

  var changesTloc = new TextLoc (firstChgPgf, Constants.FV_OBJ_END_OFFSET);

  var changesTRange = new TextRange (changesTloc, changesTloc);

  changesDoc.TextSelection = changesTRange;

  changesDoc.Paste ();

  To go at the end of the file again (I think)

  var lastPgf = changesDoc.MainFlowInDoc.FirstTextFrameInFlow.LastPgf;

  var dividerPgf = changesDoc.NewSeriesPgf (lastPgf);

  var TLoc = new TextLoc (dividerPgf, 0);

  changesDoc.AddText (TLoc, '_');

  }

  Hi Mark,

  The problem is that the dough does not occur when you think. The dividing line is added at the end of the file, but are not your actions of dough. Actually, I think that maybe a little random where pasta is produced, because this line:

  var changesTloc = new TextLoc (firstChgPgf, Constants.FV_OBJ_END_OFFSET);

  .. .is does not create a valid text location. You can check this by abandoning the service after:

  changesDoc.TextSelection = changesTRange;

  .. and look at where's the insertion point. It will probably be everywhere where you left it last, because the call is not valid. I can't tell you exactly why, except that it has something to do with the fact that you are using the last paragraph in the stream. There is something weird to try to define a range of full-paragraph text with the last paragraph. I'm sure it's related to how the last TFP in a stream does not show a mark of FMP, but beyond that, I don't know how to do what you're trying to do with the last paragraph.

  Having no knowledge of how do it right, any time I need to do this, I create a paragraph "dummy" at the end of the flow to fill that space strange 'last FMP", then do the work around it. In the end, I just want to remove fake TFP. I don't know if it's a good idea or not, but it's the only way I ever get it to work and it sorts the mirror how you could do this manually in the GUI.

  With this, I modified your script as follows, and it seems to work better. Note that I also modified the logic of how to find the last paragraph of the flow by writing a separate function. Your call to the 'FirstTextFrameInFlow' is OK, unless your doc begins to span several pages and/or begins with several empty pages. The function I wrote ensures that you really the last TFP in the stream.

  I hope this helps.

  Russ

  function copyPasteChanges (doc, chgRange) {}

  Select the section with changebar and copy it.

  doc. TextSelection = chgRange;

  doc. Copy();

  Prepare for the changes doc and paste there the modified section.

  var lastPgf = getLastPgf (changesDoc);

  var dummyPgf = changesDoc.NewSeriesPgf (lastPgf);

  var changesTloc = new TextLoc (dummyPgf, 0);

  var changesTRange = new TextRange (changesTloc, changesTloc);

  changesDoc.TextSelection = changesTRange;

  changesDoc.Paste ();

  To go at the end of the file again (I think)

  Don't forget that last TFP is now fake TFP

  lastPgf = getLastPgf (changesDoc);

  var dividerPgf = changesDoc.NewSeriesPgf (lastPgf.PrevPgfInFlow);

  var TLoc = new TextLoc (dividerPgf, 0);

  changesDoc.AddText (TLoc, '_');

  dummyPgf.Delete ();

  }

  function getLastPgf (doc)

  {

  textFrame var is doc. MainFlowInDoc.LastTextFrameInFlow;

  var lastPgf = textFrame.LastPgf;

  While (! lastPgf.ObjectValid () & textFrame.ObjectValid ())

  {

  textFrame = textFrame.PrevTextFrameInFlow;

  lastPgf = textFrame.LastPgf;

  }

  Return lastPgf;

  }

• How to find the size of the semantic model

  Hi all
  
  Please can you tell me how to find the size of the semantic model.
  
  Thank you
  INDU

  Hi Indu,

  A couple of several things:

  1 we still need an application, in order to account for the storage of the Table in the Application

  This query gives you the name of application table

  Select the table table_name from mdsys.sem_model$
  where model_name = '';

  This will give you the size in MB

  Select semmodel.table_name, dbaseg.bytes/1024/1024 MB
  of mdsys.sem_model$ semmodel, dba_segments dbaseg
  where semmodel.table_name = dbaseg.segment_name
  and semmodel.model_name = '';

  2. If the model is the only one of the semantic network, you can get the space used by the table of $ RDF_VALUE using this query

  Select bytes/1024/1024 MB dba_segments where nom_segment = '$RDF_VALUE ';

  If there are several models, this space is shared between all of them.

  Kind regards!
  Jorge

• How to find these different namespaces in the schema?

  Hello
  
  I heard that this schema contains different namespaces. How to find these different namespaces in the schema?
  
  I checked with this, but it is throwing "table or view does not exist.
  
  Select the namespace of v$ librarycache.
  
  
  Thank you
  Praveen

  Are you referring to this? From the reference manual of the SQL language under the schema object names and qualifiers

  7. part of a namespace, no two objects can have the same name.
  The following schema objects share a namespace:
  Tables
  Display
  Sequences
  Private synonyms
  Autonomous procedures
  Autonomous stored functions
  Packages
  Materialized views
  User-defined types

  Each of the following schema objects has its own namespace:
  Index
  Constraints
  Clusters
  Database triggers
  Private database links
  Dimensions

  Because tables and views are in the same namespace, a table and a view in the same schema cannot have the same name. However, the tables and indexes are in different namespaces. Therefore, a table and an index in the same schema may have the same name.

  Each schema in the database has its own namespaces for objects that it contains. This means, for example, two tables in different schemas are in different namespaces and can have the same name.

  Each of the following schema objects also have its own namespace:
  User roles
  Public synonyms
  Links to public database
  Storage spaces
  Profiles of school boards
  The files (PFILEs) settings and server settings (SPFILEs) files

  Because objects in these namespaces do not appear in the drawings, these namespaces cover the entire base.

  That's why you can do:

  SQL> create table t (id number, descr varchar2(10));
  
  Table created.
  
  SQL> alter table t add constraint t check (mod(id,2) = 0);
  
  Table altered.
  
  SQL> create index t on t(id);
  
  Index created.
  
  SQL> create trigger t
    2  before update on t
    3  begin
    4     dbms_output.put_line('T Trigger');
    5  end;
    6  /
  
  Trigger created.
  

  but not:

  SQL> create view t as select * from t;
  create view t as select * from t
              *
  ERROR at line 1:
  ORA-00955: name is already used by an existing object
  

  or

  SQL> create procedure t
    2  begin
    3     null;
    4  end;
    5  /
  create procedure t
  *
  ERROR at line 1:
  ORA-00955: name is already used by an existing object
  

  John

• How to find the point of intersection of the two geometry?

  Hello
  Could someone give some suggestions on how to find the point of intersection of the two geometry?
  I need just point. (x, y, z)
  Thank you

  Can you post the full result of geometry returned?

  What you should have as a result:

  MDSYS. SDO_GEOMETRY (2001, 1, NULL, MDSYS.) SDO_ELEM_INFO_ARRAY (1,1,1), MDSYS. SDO_ORDINATE_ARRAY (2.0,2.0))

  Notice the sdo_intersection will use only the sdo_ordinate_array, even if the result is a point! (with the SDO_POINT is NULL.)

  where do you find these x, y, z values of?

  On your other question:

  -using the operator space sdo_relate (with mask = ANYINTERACT) will return in pairs, the result of the intersection of each anyinteracting polygon, line combination.

  -of course, these results will vary from point, multipoint, line or multiline even depending on how the interaction takes place.

  -try to explain a bit more what do you mean 'I want only points to return' of nit.

  Luke