How to find space in windows xp

Similar Questions

• How to find if my windows xl version is 32-bit or 64-bit?

  How to find if my Windows XL version is 32-bit or 64-bit?

  Hello

  See the Microsoft document on the following link.

  http://Windows.Microsoft.com/en-GB/Windows7/find-out-32-or-64-bit

  Kind regards

  DP - K

• How to find spaces in a file extracted in order to trigger a rule MOVE_IT

  In the studio I'm setting a field of variable on a section and I want to learn from my file extracted using a simple rule of MOVE_IT.

  I'm going to pull information from a record that has spaces columns 10-14.  How to enter the required information in the DATA field to make the request?

  For example, if I pulled the information from a record who had 'XXXXX' in column 10-14, I know that the DATA field would be 10, XXXXX

  I can't figure out how to find space at a given offset.

  Thank you.

  As you know, normally spaces are considered as a delimiter in the search string and therefore would be ignored. Doing a search for "1, ABC, 10, ' would have been a mistake that it would look like had not provided you the final search key. However, there may be a way that you can accomplish this research by using the feature 'or' without a 'or '.

  If a search key begins with open paren, it is assumed that you will provide several possible matches. For example, you could do something like this: 1, ABC, 10,(XXX,YYYY,ZZ). That said, find the line of the snippet that starts with ABC in the first column and then a XXX or AAAA or ZZ from 10th column.

  This method 'or' uses commas to separate possible matches and not break on the spaces as a normal search mask. Therefore, you can actually do: 1, ABC, 10, (de) - where I have 5 spaces between the opening and closing paren. Note that I did not put in a comma because I only had one criteria. The system doesn't care what and will simply accept what is between the parens and pick him up.

• How to find out the Windows Update Agent version I am running

  Anyone know how I can find out which version of the Windows Update Agent I use?  I checked everything and no menu where only allows me to check the version.  This link http://support.microsoft.com/kb/949104 tell me how to get the latest version, but it is not to tell me how do I know if I am running on the latest version.
   
  And what makes it reset my of update windows components?  I read this link (http://support.microsoft.com/kb/971058#appliesto) and understand how to reset components, but I'm not clear on how this will affect my windows update.

  I have Windows Vista Home, SP2.

  Thank you very much!

  Ohanna Hello,

  Thank you for using the Microsoft answers Forums.

  Determine the current Version of WUA:

  Determine the version of Windows Update Agent (WUA) before using it. The current version of WUA is determined by the version of the c:\windows\system32\wuaueng.dll that runs in the current installation of Windows \System32 directory. If the c:\windows\system32\wuaueng.dll is version 5.4.3790.1000 or a later version, WUA is installed. A version earlier than 5.4.3790.1000 indicates that the Software Update Services (SUS) 1.0 is installed.

  When a call is made for SUS 1.0 using the API INTERFACE, an HRESULT of WU_E_AU_LEGACYSERVER is returned.

  You can also use the IWindowsUpdateAgentInfo::GetInfo method to retrieve the latest version of file of the c:\windows\system32\wuapi.dll that runs on a computer. The IWindowsUpdateAgentInfo interface is not supported in WUA 1.0.

  For more information, see update the Windows Update Agent.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.

• Where or how to find my email Windows Live Mail URL?

  I want to place a weather forecast on my home page and it asks my e-mail address and URL, but I don't know where or how to find the URL.

  The search url is the address of your web site.
   
  -Ron Sommer
  MS MVP Windows Live Mail
   
  "Rosalyn Page" wrote in message
  News: * e-mail address is removed from the privacy... *
  I want to place a weather forecast on my home page and it asks for my email
  address, and URL, but I don't know where or how to find the URL.
   
   

• How to find my current windows product key

  I have genuine Windows 7 Home Premium installed in my laptop Toshiba. This came pre-installed.

  The product key on the sticker on the back side is not visible now. How can I get my Windows product key?

  I hope to see a response soon.

  Hello

  Key Finder programs, Belarc, MagicJellyBean, etc. do not find a product key on a preinstalled OEM machine licensed (Toshiba, Dell, etc.) that is usable.

  The key they find is the key that has been used on several machines with the production at the plant of Toshiba.

  _________________________________________

  In these Forums, it is often recommended to use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.

  These are your relocation options:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks and to reinstall the operating system.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  With a Toshiba, you press 0 (zero) to start to start the recovery process

  _________________________________________

  Or make your own recovery disks:

  Windows 7

  1. click on start

  2. Select all programs

  3. Select Recovery Media Creator

  4. Select the type of media to use under Disc Set (DVD single layer, double layer DVD, or USB key)

  5. click on create, and then follow the prompts to insert the discs when necessary

  Please note: when you create a partition recovery on a USB device, it must be a USB Flash drive that is formatted in FAT32. An external hard drive does not work.

  

  ________________________________________

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• How to find accessories in Windows 8

  I don't know where to find the Accessories folder and the sound recorder icon.

  I don't know where to find the Accessories folder and the sound recorder icon.

  Hello

  The best way to find Windows accessories is to right click on the start screen and select the Apps icon on the toolbar.

  Scroll to the right and you will find accessories of Windows as one of the categories. This contains all of the shortcuts for this category. You can right click one of these shortcuts and select Pin To Start or Pin to the taskbar.

  If you want to view the actual file for this category, open Windows Explorer and navigate to the following location.

  C:\ProgramData\Microsoft\Windows\Start Start accessories.

  Concerning

• How to find the original windows product key?

  I think I need something that is not really possible, but I give it a go anyway. Some time ago, I bought a new ultrabook with preinstalled windows U840W 7. I got this sticker on the back of my laptop with product key but who are off to a long time ago. The problem I have now is that I've recently updated to windows 10 and shortly after my HARD drive has failed. I replaced my HARD drive and reinstalled windows but product key to my victory 10 showed before is not valid as an activation key. I contacted Microsoft to see what my options are and they advised me that if I can provide key to windows 7, I had at the beginning, they can solve this problem for me. Are there opportunities that I can get it somehow? Any help would be much appreciated.

  I think I'm after something impossible, but I give it a go anyway. Some time ago I bought a brand new u840w ultrabook.
  It came preinstalled with windows 7 and there was a sticker with the product key to this topic. Unfortunately this vignette came out a long time ago without notice me so I did take a picture of him. I've recently updated to windows 10. The problem I have is that my HARD drive is dead. I knew that it was about to happen, so I took a photo of product key windows 10 showed. Unfortunately once I replaced my HARD drive and did a clean install of windows 10 I can't use this product key to activate my windows. I contacted Microsoft and they advised me that if I can provide them with the product key, which was on this thumbnail when I bought my laptop, they can activate my copy. Are there opportunities that I can find the product key? Otherwise it would cost me $199 and I certainly don't want to pay for this... Any help would be much appreciated.

• How to find product key Windows 8.1 on the laptop?

  I have a problem since to do the windows updates. My laptop of seams to have erased everything off my hard drive, I have a legitimate windows disk 8 to reinstall, no product key, but it is anyway to find it on the laptop?

  I have tried to do the regedit, but can't seam to find it anywhere

  When you buy new notebook and get with preinstalled OS, you will get a valid version that includes a valid product key.
  With other words original version you got with your machine is properly enabled. Product key belongs to this original version only and you cannot use it for activation if you want to install the version of the OS.

  Your version of Win8 to pick up the product key of Microsoft.

  Of course, you have the original version of the new OS but you must order by Toshiba - https://backupmedia.toshiba.eu/landing.aspx

• How to find product key Windows XP home sp3

  I just reinstalled Windows XP home sp3, and I forgot the product key. Where can I find it? I have 30 days to activate it.

  I just reinstalled Windows XP home sp3, and I forgot the product key. Where can I find it? I have 30 days to activate it.

  Too late.

  The product key is on the packaging (box or envelope) that contains your Windows XP Home CD.

  If you have lost the package, then before you reinstalled you might have found the key to the registry using one of the available tools (e.g., http://www.magicaljellybean.com/keyfinder/).  Now that you have reinstalled, however, that the key is missing.

• How to find groups in Windows mail?

  Original title: LOST MY GROUPS NEW BUTTONS

  I have Vista and Windows Mail.  I have done a number of groups but finding now that the button is missing. !!!

  Missing the Windows Contacts toolbar buttons
  http://www.wintuts.com/missing-buttons-from-Windows-contacts-toolbar
   
  
  Vista - "New Contact" and "Contact Group on new" button missing
  http://www.Vistax64.com/tutorials/186477-new-contact-new-contact-group-button-missing.html 
   
  
   

• How to find my wpa Windows vista 34 bit home address?

  I had to reload the drivers for my hp officejet pro 8500 printer.  It was connected to my home network that is secure.  He wants to know my WPA address.  Where can I find that?  I have Windows Vista Home 34 bits.

  Hello

  Do you mean the key to WPA encryption?

  If you're lucky, it could be on a label on your router access point / wireless.

  If this isn't the case, you must query your access point/router admin pages to find out what it is.

  To help others, we will need to know the brand and model of your router / wireless access point. Please do the following...

  • Click Start
  • Click on run
  • Type cmd and press enter
  • In the black window that result, type ipconfig and return success
  • Transcribe the results of your next answer in this thread

  Furthermore, your printer can still be attributed with the WPA key, ask your printer 8500 via its Panel and look for the network settings. There may even be an option "print network settings page.

  Tricky

• How to find shortcuts for Windows Vista?

  Where should I go on the computer to find the list of the keyboard shortcuts?

  Specifically, I would like to know what the shortcut is to create a new folder. Told me ctrl + n, but that just seems to reopen the case.

  I could just look that up online, but I would like to know where the list is located on the computer in case I have questions in the future.

  http://support.Microsoft.com/kb/126449/en-us

  It is integrated with Windows.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-keyboard-shortcuts-to-open-programs

  Create keyboard shortcuts to open programs

  Mick Murphy - Microsoft partner

• How to find space in a Tablespace?

  Hello

  I have limited access to the objects in my database (do not have access to several tables).

  I have 300 GB in size in my table space that allows me to create my objects.

  Now, I want to know how much this size of table space allotted to me have exhausted. I don't have access to dba_data_files and dba_segments.

  Is there a way out for me? Could someone show me a way please?

  This query will give you the necessary information, but it uses DBA tables.

  SELECT B.TABLESPACE_NAME, TBS_SIZE SIZEGB, A.FREE_SPACE FREEGB

  from (select nom_tablespace, round (sum (bytes) / 1024/1024/1024, 2) as free_space)

  from dba_free_space

  GROUP BY TABLESPACE_NAME),

  (select tablespace_name, sum (bytes) / 1024/1024/1024 as tbs_size)

  from dba_data_files

  Group by tablespace_name b)

  where (+) a.tablespace_name = b.tablespace_name;

  However, you said that you are aware of the details of your tablespace then the above query can be modified to get the free space in your tablespace. Now I use user_frees_space and not dba_free_space. In general the user tables are and must be accessible to users.

  Select nom_tablespace, round (sum (bytes) / 1024/1024/1024, 2) as free_space

  of user_free_space

  where nom_tablespace = "your name of the tablespace.

  GROUP BY TABLESPACE_NAME;

  Ishan

• How to find space flashback

  (1) what someone could tell me the steps using GC how know how much space flashback I allocated and how much is left.
  
  (2) also if you say after the removal of old archives how do I reclaim space for space of flashback.
  
  THX

  The Flash Recovery section are in Maintenance-> recovery settings (backup/restore Section).

  If you have removed the archivelogs manually, you must go in RMAN and perform the following steps:

  RMAN> crosscheck archivelog all;
  RMAN> delete expired archivelog all;
  

  The space will be now be reused by FRA. You can use OEM and V$ RECOVERY_FILE_DEST and V$ FLASH_RECOVERY_AREA_USAGE to get a status on the FRA.