How to find the RowID basic triggers in the database?

Similar Questions

• How to find the velocity of an incremental encoder

  I use the RE22I encoder which can give up to 8192 pulses per revolution, I have A, B, Z reports that I use an fpga as a controller Please help me.

  How to find the speed of the encoder using these signals I'm going to have a clock in the fpga sysytem will help.

  Start by looking at the information on Wikipedia on the rotary encoders and a book on encoders OR white.  These articles will give you a basic understanding of the encoder and the signals it produces.

  With proper decoding, you can get the direction and momentum of each of the points on your encoder 8192.  If the tree can reverse (same vibration on one point unique all-in-mnearly stationary), full decoding must be used.  If data are only of interest while the tree turns in a direction and speed will not close to zero, a simple decoding can be used.  Decoding of a quadrature encoder is a good way to learn to use a state machine.  Signals A and B can exist in only four possible combinations, but the possible transitions to do interesting things.

  Define DECODING is a purely logical exercise and it is a simple coding in LabVIEW, such as a state machine.  There are examples, Desing Patterns, or project templates (depending on your version of LV) that come with LV to help you get started.

  By using the channels A and B you can update your calculation of velocity 8192 times per turn.  With the help of Z you get only an update by the revolution. You use depends on your application.  The pulse of Z is also useful to define a reference position for the measurement of phase angle.

  Lynn

• How to find the size of the virtual server?

  Hello

  We intend to pass our applications 4 virtual servers has 2 physical servers. In this process, we need to identify the size of the current virtual servers to use as a starting point to configure or add the size in physical server. can anyone provide information on whats stats to be noticed and how to find the size of the current virtual servers?

  Thank you

  Hi Sekhar, there.

  in general, it is a fairly complex task if you want to size the new platform correctly, i.e. not to oversize it and have very low use below, i.e. spend too much on equipment.

  In fact, it's the first thing to consider the level of use of the new platform. Most likely your organization (HW and infrastructure) has targets to a minimum. optimal and maximum usage levels.

  In the case where you do not have this as a starting point, and then you continue with load average and the current peak (CPU, RAM, NW). To these basic lines, you can use the statistics of WLS Admin Console, where the use of CPU and memory statistics are presented since the server was last started. For more detailed statistics, you can use WLDF to capture measures key at regular intervals, and then base your analysis of these data.

  Finally and above all, the size of FS, but I've seen some comments above related to the size of the FS.

  HTH,

  A.

• How to find the ID of the existing contact?

  I need to update an existing contact in Eloqua, but to do that I need to find the ID of the contact.

  I know how to get the ID of the contact after it is created the first time, but once it is already created how to find the code.

  How do I do that?

  Here is my code that I use to update, I just need to solve for '?

  EloquaAPI. DynamicEntity [dynamicEntities] = new EloquaAPI. DynamicEntity [1] ;

  dynamicEntities [0] = new EloquaAPI. DynamicEntity ();

  dynamicEntities [0]. EntityType = entityType;

  dynamicEntities [0]. Id = "???";

  dynamicEntities [0]. FieldValueCollection is new EloquaAPI. DynamicEntityFields ();

  dynamicEntities [0]. FieldValueCollection.Add ("C_GUID1", GUID);

  dynamicEntities [0]. FieldValueCollection.Add ("C_FirstName", FirstName.Trim ());

  dynamicEntities [0]. FieldValueCollection.Add ("C_LastName", LastName.Trim ());

  dynamicEntities [0]. FieldValueCollection.Add ("C_EmailAddress", Email.Trim ());

  dynamicEntities [0]. FieldValueCollection.Add ('C_Type1', 'Contact');

  EloquaAPI. UpdateResult [] result = service. Update (dynamicEntities);

  Joey

  Hi Joey,

  If you do not already have the id of the contact, then you will need to use the. Function Query() to get it – most commonly ask you based on the email address.  For this call API documentation is here:

  http://www.eloquatrainingcenter.com/Portal/documentation/API/content/API_Reference/Entity_Operations/query.htm

  The example code in this page is not large (without having to download the entire sample application), but here's a basic use (VB.net):

  Dim contactId As Integer = 0

  Dim etContact As New ELQService.EntityType
  etContact.Type = 'Base '.
  etContact.Name = "Contact".

  Dim result = are. Query (etContact, "C_EmailAddress ="[email protected]"", {"Id"}, 1, 50)
  If result. TotalRecords > 0 then contactId = result. Entities (0). ID

  Chris

• How to find the name of the Oracle database server?

  People,

  Hello. I installed Oracle Database 11 g 2 OS Oracle Linux 5. The installed directory is/home/user/OracleDB_Home and/home/user/OracleDB_Base.

  Host name is "mylinux". Name of the database instance is PT853.

  I use "mylinux" as the name of the database server, it does not work. I use another way to do as below:

  Export ORACLE_HOME = / home/user/OracleDB_Home

  Can I use "mylinux ORACLE_HOME" as the name of the database server, it does not work either.

  
  My question is:

  How to find the name of the database server Oracle with Oracle Linux 5 OS?

  
  Thank you.

  You must learn the basic of database Oracle.

  Please don't regard it not same as SQL server in terms of configuration.

  You never specify the database server name in Oracle.

  You specify the host name in only two places, 1) Tnsnames.ora/JDBC/ODBC (or any client you want to connect) and listener.ora) 2.

  There was nothing called specify the name of the Oracle database from an oracle database server.

  Concerning

  Anurag.

• says that there is an update of firmware available for my 3 t time capsule. I get "an error occurred when downloading". How to find the problem?

  I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3

  Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.

• How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  How to find the serial number of the processor in the MacBook pro s serial number? I have a dead MacBook that was given for service to a third party. I doubt that they have replaced the original parts. Help, please. Thank you

  As far as I KNOW, the serial number of the MacBook does not have the serial number of the processor.

• I make new the old id must paasward wen apple id I go passward, says your id or passward not at even I have received emails but get no email how to find the solution, I, m stuck wat to do

  I make new the old id must paasward wen apple id I go passward, says your id or passward not at even I have received emails but get no email how to find the solution, I, m stuck wat to do

  Have you tried to reset it in security issues? If you are not able to do so, contact Apple support so a security identifier Apple Advisor can help you. 800-275-2273.

• How to find the date item was my favorites on Mozilla Firefox

  on system moot bookmark how to find the date of the bookmark?

  In bookmarks menu select organize bookmarks to open the bookmarks library. In the bookmarks library, click views, and then display the columns and then added. This will display a column showing when a bookmark has been added.

• How to find the owners of icloud id?

  IM new to this thing from icloud, I bought 3 old ipads2 on a flea market, where unlocked 2 but we have icloud, the screen is not the old owner alone info [email protected], I don't have a problem, try contacting the owner, but how to find the id of owner? even if is a stolen ipad that I'll be more than returned gad, or ask the owner to remove icloud, but without the owner info is difficult, any advice will be apreciated, thanks

  You can not find it. Go back on the market and claim a refund for the iPad.

  (140442)

• NB200 - how to find the 3G module for it?

  Hello

  Pls how I find the 3G module in my NB200 - PLL20E?

  Thank you

  Hello

  What do you mean exactly?
  You want to upgrade your NB200 with a card 3G?

  If yes then you must make sure that your NB200 could be improved using this card.
  I'm not sure if this is possible.

  But don t give up boyfriend Toshiba authorized service partner in your country could provide details.
  Guys might be able to tell if this is possible and could provide a good 3G module

  If you get more details please share with us!

  See you soon

• How to find the yahoo flickr Photo password used to download photos from the Photo app?

  I have 151 000 pictures on Flickr that were loaded from Iphoto, then more recently the Apple Photo app on my imac.

  I can't open a session using a browser because the browser (Chrome) has lost the password of his records.

  How to find the password that the Photo is using app?

  You can not extract the code to access from iPhoto or Photo. I could go to the Web of Flickr site and see what password recovery options they offer for your account.

• How to find the webcam on my hp g56122us note windows 7

  How to find the webcam on my computer vision g56122us hp laptop? I can't get my webcam so I can make a video or take a picture. I have no idea how to do so that he could appear on my screen

  Hello
  
  Please use it to check & difficulty:
  
    http://support.HP.com/us-en/document/c02452221     
  
  Links for XP & Vista are here also.
  
  Good luck.

• How to find the number of data items in a file written with the ArryToFile function?

  I wrote a table of number in 2 groups of columns in a file using LabWindows/CVI ArrayToFile... Now, if I want to read the file with the FileToArray function so how do I know the number of items in the file. during the time of writing, I know how many elements array to write. But assume that I want the file to be read at a later time, then how to find the number of items in the file, so that I can read the exact number and present it. Thank you all

  Hello

  I start with the second question:

  bytes_read = ReadLine (file_handle, line_buffer, maximum_bytes);

  the second argument is the buffer to store the characters read, so it's an array of characters; It must be large enough to hold maximum_bytes the value NULL, if char [maximum_butes + 1]

  So, obviously the number of lines in your text tiles can be determined in a loop:

  Open the file

  lines = 0;

  While (ReadLine () > 0)

  {

  lines ++;

  }

  Close the file

• average of k: how to find the data clustred; : or how to assign number t0 each data group

  Hi Member

  I have download the LabVIEW Machine https://decibel.ni.com/content/docs/DOC-19328 learning package

  I want to run the K average algorithm to group the image in a group of two or three or more

  the problem is how to find the result I mean the image of clustred', the image that contain 2 or three threatened value only

  or how aasign a 1 value for all the intesity who

  belong to the cluster a and 255 for data that belongs to group 2

  for the look of the image as binary image?

  a my vi below

  Best regards

  my post before shows how to set the threshold manually using the slider of the graph.

  Here is the version k-means automated help .vi box tools

  

  

  Alex