How to fix a SAN iSCSI on an ESXI 3.5 host?

Similar Questions

• [SOLVED] How to create public keys to ssh to ESXi to another host?

  I have read a number of different sites trying to find information on how to do it properly, but I had no luck.  I'm afraid at this point I'm all mixed up or miss me something simple [painfully].

  My goal is to create keys so that I can ssh/scp, as root, the ESXi server to another server in linux/unix under a different name.  Most, if not all of the sites I found coverage today the reverse: ssh/scp from another machine to the ESXi server.  I assume that ssh ESXi-> another host via keys is possible...?

  I believe that I'm almost there, but in all honesty, I don't know.  Here's what I've done so far.

  • RSA and DSA keys with dropbear created on the ESXi Server
  • convert keys RSA and DSA dropbear ssh format
  • Cat's public RSA and DSA keys in the ~/.ssh/authorized_keys on the server that I would like to ssh/scp
    • even tried to make a copy of authorized_keys as authorized_keys2 on the destination server
    • same CAT had the public keys of the ESXi authorized_keys & authorized_keys2
  • went up to copy the private key (!) from the ESXi server on the server I ssh/scp area in

  In regards to the box, I'm remote in I

  • keys generated with ssh-keygen - t dsa and rsa
  • typed in a sentence
  • CAT had the public key in .ssh/authorized_keys on ESXi box
    • as above in desperation I added it in the file authorized_keys local
    • copied authorized_keys to authorized_keys2
  • copied private keys (!) of the destination inbox ESXi machine

  I tried ssh username FQDN, ssh username@FQDN-l and with the IP address itself, whenever I was asked for a password.  Naturally if I just ssh hostname it trying to connect as root, which is not allowed and will fail.  Again, I apologize because I'm probably all mixed now. might be wise to simply erase all keys & start over.

  Is this possible?

  Is anyone interested in lending a hand?

  Resources

  http://communities.VMware.com/message/1373428#1373428

  http://communities.VMware.com/docs/doc-8890

  http://pkeck.myWeb.uga.edu/SSH/

  http://computerpr0n.com/2011/04/ESXi-remote-management-part-2/

  http://oreilly.com/pub/h/66

  I blogged about this recently:

  http://blog.Cowger.us/?p=15

• How to create a SAN in my test environment

  Hello

  I am very new in VMware

  Please suggest and give the idea to create the SAN in my test environment

  Please find below the link to configure starwind

  and the wind stars software is free

  StarWind free virtual SAN

  Configure the video

  How to build a Starwind iSCSI SAN for ESXi - YouTube

• Can I use VDS with LACP to reduce on group SAN iSCSI connections?

  I'm trying to reduce the number of iSCSI connections to my EqualLogic storage group. I currently use a standard vSwitch with two ports vmk by server for SAN. Can I use a single vmk with VDS/LACP to reduce my by half by server iSCSI connections and still maintains band bandwidth/redundancy?

  I'm quite confident, it will work, but hoped for validation. Please correct me if I'm totally turned off, or if it would be not supported.

  My volumes cover several physical devices (20 paths for 7 volumes by iSCSI adapter). Can I assume that with load balancing on an OFFSET of the source and destination hash value, I would get at least some balancing between adapters?

  If you have several points of termination targets L2 - 4, Yes. For example an IP address, MAC address, unique ports or. Paths, volumes and devices are not relevant to the LACP.

  If I don't choose a LAG, I can't visualize how it would reduce my iSCSI for my storage pool connections. I'm setting targets on my Broadcom cards, the vmk connects through these cards. Is the logic that is smart enough to only connect the active paths on an adapter or another in an OFFSET? I do know that I have make sense more that I might have to play with a SHIFT on a host isolated for a bit and see exactly how it will behave.

  The adapters are more exposed. The LAG is a logical interface. Traffic can be sent or received through any physical adapter in the GAL.

  Note: I would not use an OFFSET for iSCSI on a vSphere host traffic: seriously, Stop Using Port channels for vSphere storage traffic. Wahl network

• Since iOS recent upgrade to my 5s my battery drains too quickly.  How to fix this problem?

  I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly.  It never happened until this update.  How to fix this problem?

  Hello kellyfromrexford,

  I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s.  To determine what application or process affect the life of your battery, take a look at the information in these resources:

  On the use of the battery on your iPhone, iPad and iPod touch

  Maximize the life of the battery and battery life

  Take care.

• friends air grille iPad blushed. any ideas how to fix

  Hi my friends iPad air 2 has suddenly had a red screen, it was not dropped or damaged, any suggestions how to fix it.

  Hey Timothy,.

  Please use Apple Support communities to get help for your friend. I can see your post iPad friends Air 2 is a red screen but has not dropped or damaged. Having a job to display on your device is essential and I'd be happy to help you get it working again. If your friend has already tried, they should perform a forced reboot. These steps are in the link below.

  Restart your iPhone, iPad or iPod touch

  If this does not get the iPad screen to display normally, then we you will get it looked further at an Apple Retail Store or Apple authorized service provider. Your friend can locate one close to them with this link here: find

  We are here to help.

  See you soon.

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• How to fix no network service on iPhone 6plus

  How to fix no network service on iPhone 6plus

  Try here > If you can not connect to a cellular or cell - data Apple Support Network

• Hey I lost my ios for my macbook how to fix

  Hey I lost my ios for my macbook how to fix or install ios

  You have a Macbook, but you've posted in the forum for desktop - I asked guests to move it on the forum of Macbook.

  Your Macbook does not run iOS - it is for iPhones and iPads. I guess that say you you have damaged your operating system somehow, OSX - is that correct? This Apple help page explains how to reinstall your system:

  On OS X Recovery - Apple Support

• iCloud cannot sync contacts after 10 updated windows kb3176495 - how to fix?

  iCloud cannot sync after 10 updated windows kb3176495 - how to fix?

  Stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• How to fix my camera back to the iphone 5?

  How to fix my camera back to the iphone 5?

  < re-titled by host >

  Depends on. What's wrong with it? You will need to provide a bit more detail.

• How to fix error 30?

  How to fix error 30?
  I can print online from IE but don't want to.
  Thank you

  Hello

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• How to fix the maximum number of free accounts have been activated on your iPHONE

  can someone help me how to fix my problem all consumable free account in your iPHONE? Please help me.,.,.

  Could you give more details on this type of account you're talking about the iPhone.

• How to fix error "connection to the server has expired"?

  I'm having the same problem, as shown here: https://support.mozilla.org/en-US/questions/1068987

  From today I get [email protected] server connection timed out ' error.
  

  I was running v31.x, so I've updated to 38.x but I; m until the question.

  -Two separate IMAP e-mail accounts are defective; both are MediaTemple email accounts; No config has changed; I am able to access recent messages via iPhone and through the webmail interface.
  -J' restarted Thunderbird in safe mode, but that did not help.
  I checked the password and any other standard "is it plugged in?" the kind of things
  -I went to the configuration editor and brought up delays in mailnews.tcptimeout, mail.server.server1.timeout, etc. all at 300, no help here either

  Any ideas how to fix?

  colinjohnston said

  I'm having the same problem, as shown here: https://support.mozilla.org/en-US/questions/1068987

  From today I get [email protected] server connection timed out ' error.
  

  I was running v31.x, so I've updated to 38.x but I; m until the question.

  -Two separate IMAP e-mail accounts are defective; both are MediaTemple email accounts; No config has changed; I am able to access recent messages via iPhone and through the webmail interface.
  -J' restarted Thunderbird in safe mode, but that did not help.
  I checked the password and any other standard "is it plugged in?" the kind of things
  -I went to the configuration editor and brought up delays in mailnews.tcptimeout, mail.server.server1.timeout, etc. all at 300, no help here either

  Any ideas how to fix?

  Update: [solved]

  Although everything else about my internet connection worked perfectly well, I suspected that maybe this question was related to the other oddities that I experience with my Comcast DOCSIS modem. I restarted the modem and without timeouts more in Thunderbird. Again, I didn't have no other question similar with connectivity, but my IMAP authentication uses port 993, and there was something stuck on the subject through my connection. Maybe this info will help some people to solve the problems they are the way out of this problem.

• How to fix stuck battery and automatic when restart updated ios 9.3.3

  How to fix stuck battery and automatic when restart updated ios 9.3.3

  Lambung writes:

  How to fix stuck battery and automatic when restart updated ios 9.3.3

  What do you mean battery stuck?

  the basic troubleshooting steps are: reboot, reset, restore from a backup or restore as a new.