How to fix corrupted file CAB for Microsoft Flight Simulator 2002?

Similar Questions

• What is recommended for Microsoft Flight Simulator?

  Original title: Flight Simulator

  Microsoft Flight Simulator is a "simple basic game.  "I didn't know that I bought a computer with 9 gigabytes of R.A.M.1 t .b i7.  Disk space... 500 gigabytes used for the operating system... I ask Microsoft forum, "which is recommended for Microsoft Flight Simulator?  What... Map chart, power supply, memory,

  and what kind of processor work perfect?  Thank you very much... Please consider that I am retired military with no computers, so be nice and, "Please keep it simple... »  Thank you very much....******************************************************************************************************

  The "minimum" has been helpful... Thank you... However, I would like to know, what type of CPU / video card works better... One who stops at blurry display {landscapes in turn gray, or disappears} and the computer freezes... * thank you very much... * maybe, what I am asking, "what is everybody having a chance with? ''

  Check this. http://support.Microsoft.com/en-us/KB/925724
  You might find the information as Your ' e you are looking for.

• fuel for microsoft flight simulator selector

  When flying the Boeing 737-800 I show you 3 selections of fuel: central tank and tanks 1 and 2.  When I take the plane fuel is to be used only from tanks 1 and 2 and the motors stop even though I have a full tank Center.  Is there a way to select what fuel tanks are used?

  Hello

  I suggest you to connect with the Microsoft Flight Simulator

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  See also:

  http://support.Microsoft.com/GP/games-for-Windows

• How to fix corrupted file MSDT.exe on Windows 7 error "C:\Windows\diagnostics\system\Networking is corrupted and unreadable."

  Original Title:msdt.exe corrupted file

  I can't find any solution to repair is Msdt.exe corrupt file.

  This is the error I get C:\Windows\diagnostics\system\Networking is corrupted and unreadable

  Windows Update is not automatically searching for updates and I can't update adobe

  These are the things that I tried 1.  Restore to an earlier date. (does not work because of the corrupted file)

  2 Ckdsk (does not work or does not work in safe mode)

  3 Sfc/scannow (does not work or does not work in safe mode)

  4 Microsoft Fix (cannot open the troubleshooting of windows) does not work.

  This is the error that I get Code80072efd

  Hello

  I'm afraid that, as most of the troubleshooting steps have been tried before without much success, only two options remaining to recover operating systems are:

  (a) the system restore:

  System Restore helps you restore system files from your computer to an earlier point in time. As a general rule, you want to restore your computer to a restore point created before the date and time when you started noticing problems. The descriptions of the restore points are created automatically with the name of an event, such as Windows Update to install an update. System Restore returns your computer to the State it was in before the restore point that you choose.

  To learn more about how to run system restore you can follow this link given below:

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

  NOTE: However, it is said that the system restore does not affect your personal information such as e-mail, documents, photos, videos, etc., but it is quite possible that some of your personal files are removed during the restoration of the system.

  During the restoration of the system, there may be errors and those errors can damage the files that are present in the system. And turn off your computer during the restore process may also lead to the loss of files. Sometimes, when the restoration of the system is down, it can lead to the loss of important files as well.

  (b) in the upgrade of the Place:

  An upgrade on the spot is the final solution before you have to reinstall the operating system.
  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  Note: Applications that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  Hope this helps, if you need help with windows, please let us know we will be happy to help you.

• How to fix corrupted files of the sfc scan?

  These are the errors obtained in the sfc scan:

  2013-05-14 20:14:50, 000000e8 CSI Info [SR] cannot repair the military record [l:22 {11}] "PINTLGB. IMD"Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch
  2013-05-14 20:14:50, CSI Info 000000e9 hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... lified-Chinese-core_31bf3856ad364e35_6.1.7601.17514_none_763763505e93084b\PINTLGB. IMD is not actual file [l:22 {11}] "PINTLGB. IMD:
  Found: {l:32 b:l4ReoUNWh7axj8oO76qf9ql41yMn3b3y + lmJH5RaV7w =} expected: {l:32 b:J6AvUKZSQcIPKPun7NfGVWIMm3i + 0inkQGELvMplJfQ =}
  2013-05-14 20:14:50, 000000ea CSI Info [SR] cannot repair the military record [l:22 {11}] "PINTLGB. IMD"Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch
  2013-05-14 20:14:50, 000000eb CSI Info [SR] this element is referenced by [l:202 {101}] "Microsoft-Windows-Foundation-Package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.7601.17514.WindowsFoundationDelivery '.
  2013-05-14 20:14:50, CSI 000000ec hashes for Member file Info? \C:\Windows\IME\IMESC5\DICTS\PINTLGB. IMD is not actual file [l:22 {11}] "PINTLGB. IMD:
  Found: {l:32 b:l4ReoUNWh7axj8oO76qf9ql41yMn3b3y + lmJH5RaV7w =} expected: {l:32 b:J6AvUKZSQcIPKPun7NfGVWIMm3i + 0inkQGELvMplJfQ =}
  2013-05-14 20:27:39, Info CSI 00000318 [SR] cannot repair the military record [l:22 {11}] "PINTLGB. IMD"Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch
  2013-05-14 20:27:39, info CSI 00000319 hashes of file members \SystemRoot\WinSxS\amd64_microsoft-windows-i... lified-Chinese-core_31bf3856ad364e35_6.1.7601.17514_none_763763505e93084b\PINTLGB. IMD is not actual file [l:22 {11}] "PINTLGB. IMD:
  Found: {l:32 b:l4ReoUNWh7axj8oO76qf9ql41yMn3b3y + lmJH5RaV7w =} expected: {l:32 b:J6AvUKZSQcIPKPun7NfGVWIMm3i + 0inkQGELvMplJfQ =}
  2013-05-14 20:27:39, CSI Info 0000031a [SR] cannot repair the military record [l:22 {11}] "PINTLGB. IMD"Microsoft-Windows-IME-Simplified-Chinese-Core, Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch

  Someone knows how to fix this?

  Hi Fang,

  Please refer to ' use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files"and follow the topic:". "

  Step 1: Determine which files can be repaired by the System File Checker tool.

  Step 2: If the System File Checker tool cannot repair a file.

  Please report if you have any questions.

• How to fix corrupted files showing in C:\WINDOWS\SoftwareDistribution\Download\2d8407673ea9865ef7cd775540e3a36b

  It is a folder in C:\WINDOWS\SoftwareDistribution\Download\2d8407673ea9865ef7cd775540e3a36b all files are damaged with names of files as a, w, $z, how delete the folder, to try to remove it gives error message cannot delete, file name\volume name \directory is incorrect\syntax error * original title - 2d8407673ea9865ef7cd775540e3a36b *.

  Hello

  ·         What is the exact error message you get?

  ·         Remember to make changes to your computer before this problem occurred?

  ·         Since when are you facing this problem?

  Try following the methods provided below and see if it helps:

  Method 1:

  I suggest you follow Method 10 article below and check if it helps:

  http://support.Microsoft.com/kb/822798

  Method 2:

  Also suggest to run the check disk for any error refer to the KB article below:

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Method 3:

  If the problem persists, run the SFC system tool to solve the problem:

  http://support.Microsoft.com/kb/310747

  Hope this helps,

• How can I get a replacement CD 1 for Microsoft Flight Simulator 3

  Disc 1 is scratched so it will not load the game. Loads to 38% before getting an error that the files can not be read disc - installation interrupted.

  Hello

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  See information on the replacement on this link.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/replacement-CD/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• each icon opens the microsoft Flight Simulator

  Each icon in my Start menu and also my office only opens x for some reason microsoft Flight Simulator any. There was no restem system restore points so I can't do that. I need a solution to this problem.

  You have indicated above, I believe the file association for the shortcut LNK files gave the misdirection for Microsoft Flight Simulator X. I have seen this occur when you open a document or another filew via a shortcut (for example. LNK file), you are asked what type of program to open it with. After selecting Microsoft Flight Simulator X (or another program) via the Select a program from a list of programs installedand check always use the selected program to open this type of file (circled in red below), the program referenced by the shortcut of origin or document opens in Microsoft Flight Simulator X as it should.

  

  The problem is that now all shortcuts (for example. LNK files) on the desktop or in the Explorer and the start menu will want to be opened by Microsoft Flight Simulator X and use the icon for Microsoft Flight Simulator X to display the shortcut no matter what shortcut was initially intended to open. This is known as a file association and the default icon. The same condition can occur if you have performed these actions 'Open with' on one. JPG or even a. EXE, but the. LNK explanation is much more likely for the items on the desktop.

  The good news is that a small free utility was written to cancel the. LNK file association was created. There is also a registry hack to achieve, but I recommend the utility unAssoc for its ease of use. I used to send people on another site to download this utility, but this site has become confused with all the ads and fake download links. I put a copy on by SkyDrive own here.

  

  Just download, then use the utility to unassociate the. LNK files for the user or globally delete the file type and let windows rebuild a new default.

• Microsoft Flight Simulator Hangs

  I have been using Microsoft Flight Simulator for years on Windows XP without any problems.  I recently updated my computer and installed Flight Simulator on Windows 7 which seemed to work perfectly for a few weeks - then recently after making a perfect close to landing on a site I visited frequently, when I chose "instant replay" to view the landing once again, Flight Simulator will close.

  This happens everytime I try to use it.  I've uninstalled and reinstalled the program, but the instant replay always stops the program.  Someone at - it ideas on what I can do to remedy this?  (Please don't you too technical with the answers)

  Hi Chris,

  1 did you do changes on the computer before the show?

  I suggest to refer to the article and follow the suggestions.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032/en-us

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you still have questions, I suggest you to contact technical support for Microsoft flight simulator.

  Contact technical support

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/ContactingTechnicalSupport.aspx

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• How to fix corrupted OS files?

  Recently, my Windows 7 OS had a collapse and I decided to see if something was really bad or if it was an anomaly to randomly both chkdsk and sfc/scannow. CHKDSK completed successfully and (allegedly) compressed the flow of safety data and found this option (I think that's what he says?) in free space from my hard drive. Then once I started in Windows 7, I ran sfc/scannow, who told me that there it cannot fix corrupted files.

  So my question is, how do I find the files that are corrupted and fix them?

  (I post the CBS.log file but sticky allows the browser to go unresponsive.) If there is another way of signaling it (perhaps by download?) then please tell me.)

  Ty

  Select Start, Panel, programs and features, see updates installed. Right-click on KB3068708 and choose Uninstall.

  Select Start, Control Panel, Windows Update, check the updates. Right-click on KB3068708 and select hide this update. You will have to perhaps select optional update is available , see KB3068708.

  Test the fix by the running System File Checker again.

• How to decompress the files downloaded for use with Windows 7?

  How to decompress the files downloaded for use with Windows 7.  Specifically, zip files are a Magellan GPS unit.

  There are instructions at: http://windows.microsoft.com/en-us/windows7/compress-and-uncompress-files-zip-files

• How to find corrupted files and remove them on mac i

  How to find corrupted files and remove them on i mac?  AM currently using OS x EL capitan 10.11.12 Mac said to run slowly and the recent upload did not work until the 3rd attempt.

  Thank you

  You do not have.

  You can run this program and post the results so that we can see what you have installed that could cause your problems.

  http://www.etresoft.com/etrecheck

• How to create the file .bar for production mode?

  Hello

  How to create a file .bar for production mode?

  When Flash Builder, I configure my project for the mode of Production, he asks me a RIM certificate that must be registered (and then need a CSI file?). Where can I find this file?

  Thank you

  Signature of application information has not yet been published.  You can submit your application unsigned.  In addition, in FB4, in the Properties window of the project, under the Flex compiler, you can add

  -debug = false

  to compile without debugging information.

  Otherwise, .bar file creation is done in a regular compilation with BB CLI package.

• How to create a file .eas for sprite sheets?

  Hello

  Does anyone know how to create a file .eas for sprite sheets.

  It looks like a data xml file that would normally correspond with a sprite sheet. I usually use automated sprite sheet software to create the xml data form. I don't see the option for .eas export file in the software of the packer of texture that I use.

  It would be convenient that Photoshop has the ability to export an eas... perhaps with a plugin.

  Thanks for your help.

  EAS file format is also a JSON format, but is specific on board animate. Currently, this spritesheet format can be generated from Flash Pro CC 2014.

  Spritesheets (image file with sprite of equal size stacked in the order) of other tools like packer of texture can also be imported in animate as the dialog box animate import Spritesheet support it. Production however you specify the rows/columns and parameters in the import of fill dialog box so that the sprites are created with precision.

  Plese do try it and let us know if it works for you.

  -Reynaud