Example of car iPad/Android data dashboard

Similar Questions

• QMH data dashboard

  Hello

  I did a program using the messages in queue (QMH) Manager based on the continuous measurement and logging example comes with LabVIEW 2013.

  I want to view and control the program using the control panel data with web services (for Ipad). I followed this tutorial;

  https://decibel.NI.com/content/docs/doc-40079

  With the help of this tutorial, I am able to connect my desired and indicators controls on the dashboard of data.

  But when I run the dashboard of data, it does not interact with the program. If however, I have the web resource vi of the program itself if works.

  I made a dummy vi which simply creates a random number and it works fine, using the web services of data dashboard.

  Does anyone know what I am doing wrong?

  Kind regards

  I would try to set up the Web server port for the EXE to a different number; something very far from standard 8080. So make sure you that data dashboard is the port for your EXE and not your project.

  I've never tried defining two Web servers to run on the same port, but I had problems with port conflicts (using the same port for the project and as a result of the EXE) using VI server.

• Data dashboard showing "no supported variable... »

  I work with dashboard of data for Android, a mobile phone of Sony, and I followed the whole procedure to create, build and deploy a web service.

  I am able to access the Web server of the data dashboard application, and I can also visualize Web Services and their deployed variables.

  The problem is when I select a particular variable deployed; I show a message "no supported variable... "when I select this, I am taken back to the home page of the dashboard of data. Here is the photo of the message I get.

  I checked the data types of the variables network I used in my VI, and they are all supported by the dashboard of data.

  Does anyone have an idea about what is really happening, and the reason for this message?

  I would be grateful for any help!

  Thanks in advance.

  e.

  
  

• Indicator of waveform data dashboard with multiple locations

  I have a chart in waveform with multiple locations on my main VI running.

  I use the Application Dashboard data 2.2.1 on my Ipad to monitor table of wave shape of my running app.  I placed a marker on my Ipad and also related waveform with my waveform array variable.  I can't play my data dashboard application because it shows unable to connect to the server.  I noticed that it is because of multiple plots being plotted on my table of waveform.

  I could only play the App data dashboard when it is just a single parcel related to an indicator on the App.

  My question is if it's possible to have a graphical indicator of waveform on a data dashboard that has several plots being plotted and not only a single square, and how to configure it?

  Thank you.

  Click on Bravo and select as an accepted answer.  You are welcome.

• Problem in the use of data dashboard

  Hello

  I wanted to start with data dashboard application, I installed the app on my phone Android mobile phone.

  I followed the document started with the http://www.ni.com/white-paper/13757/en/ dashboard data

  the screen illustrated in this document comes when I start the application in my laptop.

  The first screen

  

  The second screen after add touch

  

  The last screen that gives an error

  

  Waiting for response.

  Concerning

  resolved after seeing www.youtube.com/watch?v=FCujba8euWc

  Thank you all

• My ipad is disabled. How to activate ipad without data loss? I know the password

  My ipad is disabled. How to activate ipad without data loss? I know the password

  You can not. If you know the password, how the iPad become disabled? If the device is disabled, the content is not already available. The only way to recover the device is to restore. You can restore your last backup after that. Follow the instructions in this document support. If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• How to show the output of the signalexpress power spectrum in data dashboard

  Hey guys.

  I made a program that collect analog data from two sensors in vibration, and then I use the signalexpress power spectrum to get in the frequency domain.

  I would like to show the signals and the FFT in dashboard of data.

  It is not possible to display the data directly because the XY graph in data dashboard supports only the two figures on the right cluster table?

  Is it possible to convert data from the spectrum of power signalexpress table of cluster of two numeric values?

  Or any other ideas would be appreciated

  

  
  

• DW6 can create apps for Iphone/iPad, Android, and Windows Phone?

  I was wondering if Dreamweaver 6 is able to create applications for Iphone/iPad, Android, and Windows Phone, so that when I'm done, I'll have one. APK for Android, a. IPA for iPhone/iPad or another Windows 7/8 uses.

  6 Dreamweaver done this right out of the box, or do I need another specific program to do this?

  Thank you

  Chaz

  You can create applications Web using DW for Android / iOS devices. Webapps are HTML5 based applications. You can use Phonegap for this: http://www.phonegap.com/

  If you want to create native applications for these platforms, you can use the SDK for each. XCode for iOS - https://developer.apple.com/devcenter/ios/index.action

  Android here: http://developer.android.com/training/basics/firstapp/index.html

• How to use the graph of the intensity in the iPad data dashboard.

  Hello

  I use a graph of intensity in my vi main under a project of myRIO.

  I created a shared variable of the 2D array. When I selected the variable in the ipad it does not show that he presents in the pc...

  I want to mention that I have selected the multiplier as (= 30/255) 0.117647 in labview in pc

  I use the version of labview 2015 myRIO.

  and I am using iOS 10 in my iPad

  can someone help me please

  Hi adil,.

  The graph of the intensity is not supported in the dashboard of data.

  Kind regards

  Denny

  AE Singapore

• Connection error android application OR data dashboard

  I did a project and vi on it. I did a shared variable, and it has successfully deployed. I want to pass this variable through my router wireless app android (dashboard OR data). I'm unable to connect it as when he asks me the address of the server on my phone I plugged it to the address 44.0.1.5, but always a connection error message. My router IP is 192.168.1.2, and even still the connection error message. I disabled my firewall and still... in short I want to see the value on my android app. Check it out the images that I attached. How to connect to a shared variable made on my pc and see it on the phone?

  Hey defined

  Have you reviewed this article for the hardware and software firewall configurations?

  http://www.NI.com/white-paper/12402/en/

  Frank R.

• "Data dashboard" version 2.0 list drop-down list seen only "one, two, etc.» Instead of the text Enum

  I am currently using the new data on an iPad dashboard 1. I'm coding in suite developer Labview 2012. I found that switches work very well when it is associated with a shared variable. I finally managed to get the drop-down list to control a shared variable of data type typedef/enum. This control very well within the Labview program, but on the dashboard of data drop-down list shows only the "One" "two" etc... instead of the text 'This' Enum 'As' 'Other' I can write back to the dashboard with a text conversion of the enum to the dashboard and place it in a display of string over the fall down. While this gives the operator a display of the current Typedef/enum, it is not very intuitive. They must select 'One' to view 'This' "two to display 'Than' etc...

  How can I get the dashboard of data drop-down list control to display the text of the enum instead of "one" "two" etc?

  I think the point was that your question belongs to this other forum, not the forum of LabVIEW.

  (I'll ask the moderator to move this thread i).

• Good examples of DPS on Android?

  Hello

  Are there any good DPS magazines on the Google game store would you recommend to study, examining and pinching ideas from ?

  I took a look but was severely disappointed by the experience, which means that it's a great opportunity to make a killing or technology nothing beats the market controlled by Apple's iPad. I appreciate there are a few overlays that are not compatible, but after spending an hour I still find something I could show a client as a good example of the potential.

  Kind regards

  Simon.

  When creating content for Android devices, you should keep in mind that the new 1280 x 800 7 "devices such as the Nexus 7 include a larger system navigation bar. While the 1280 x 800 10 "Galaxy and Xoom tablet display 48 pixels nav bars, the Nexus 7 displays a bar of nav 75 pixels. To avoid chipping, consider creating a rendering 1280 x 725 (pm only) for the Nexus. If you create a folio dual orientation, creating a folio 1205 x 725 and items to avoid scale on the Nexus. If you have already created 1232 x 752 folios and articles don't want create new items, create a rendering of smaller folio that has the same proportions as your source items. To get advice from DPS, I created a folio 1155 x 705 and imported my 1232 x 752 items. (It actually took me more time to calculate the numbers only to import the items.)

  When you created the Viewer application that does not work on Nexus? You should be able to use the latest version of the viewer Builder to create a viewer that works on the Nexus. DPS tips works great on my Nexus. Once you get created, I would like to know if you would like to move your application to test.

  Another thing to consider. The fire of Kindle does not display the navigation bar on the Android system. Creation of 1024 x 600 and 1280 x 800 renditions folio should work for current and future fire models well.

• Is the iPad limit data usage via personal hotspot from my iPhone?

  I have unlimited use of data in the Netherlands, but in France the use of the data is limited. I don't want my iPad to consume all the data because of unwanted downloads.

  The iPad is aware that he uses a personal hotspot from my iPhone. It modifies the behavior of data then use?

  Using an iPad with an iPhone 5s mini3. Both running latest version of the OS.

  Bolderbast wrote:

  The iPad is aware that he uses a personal hotspot from my iPhone. It modifies the behavior of data then use?

  No, the iPad doesn't "know" that you have a limit on your data. It does not change the behavior of use based on the type of connection (other that it will not download files more 100 mg on cell phone).

• Hi I recently transferred my mini iPad iPad pro data now all my game data is lost on both devices. It starts from the beginning of the games. Consedring I played all the games for 2 years, it's really sad. Any advice?

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro. Now all my game data was lost. All of my achievements and waiste game purchases. All my games is in the stages of early on both devices any help?

  Blazeyboy wrote:

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro.

  How do you transfer the data? Do you have the old iPad to backup and then restore this backup Pro iPad? Have you followed these steps?

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

• Data dashboard: pending on the user

  In trying to connect with dashboard of data from my laptop to my iPhone, I get the status message on the laptop wireless indicating "waiting for user to connect" with a yellow exclamation point.

  How can I move forward? Thank you!

  Oops! Figured it out! He expects the other device to connect.