How to fix sound on the Audio 1 track?

Similar Questions

• How to fix sound coming speakers and headphones at the same time?

  My computer old enough, I'll tell you that. I bought it on ebay with Windows XP pre-installed, and I uninstalled it instantly to I can have the pleasure of installing Windows Me (because I'm a little strange) with an installation disc, I had to hang out. Everything worked fine, until one day I decided to install Windows NT 4.0 and that pretty well done the sound somehow. To resolve this problem when I reinstalled XP, I found a driver that worked perfectly. With XP, I've had no problem with the sound since I installed the driver; the sound comes through the headset when it is plugged and through the speakers when my headphones are plugged into.

  Now, here's the problem. I installed Windows 7 Home Premium last night, as it came with another computer that broke some time ago. It works perfectly, just a little slow because my computer is old. Of course, I expect to have to install the audio driver again, as I formatted my hard drive before installing 7. So I downloaded the driver from the same place, as I always do, site Web of Realtek. After installation, the sound works fine - but it comes out through the speakers and the headphones at the same time.
  I tried to plug my headphones into the Jack located on the front of the computer and back, and it's still having the same problem. He has nothing else connected to the computer but the monitor, keyboard, mouse and wifi adapter.
  Windows 7 is the only OS by far that has had this problem on this computer. Strangely, on the computer on which he came with, I have no trouble. I plugged it right in there and badabing badaboom, everything was perfect.
  So I don't understand why it does not work on this computer. If necessary, my audio device in the sound options is Realtek AC 97 Audio.
  Any help would be appreciated!
  Hello

   

  Thank you to ask a query in a Microsoft Community.

   

  I understand that you have problems with the audio devices with the Windows 7 operating system.

   

  I have a few suggestions that you can try to solve the problem.

   

  Please refer to the suggestion of Mouneshwar R replied on August 28, 2010.

   
  How to stop sound play two headphones and speakers
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/how-prevent-sound-from-playing-through-both/4d65f6fb-873c-4154-8dd1-638877c6e4a1
   
  Hope this helps, if not, please respond to this line, and we will be happy to help you again.

   

  Thank you

• How to put in place the audio on vsta home premioum? I went to control panel and I blew... Can you help me.?

  How to set up audio on vista home premioum. ? the sound on my pc was working but I unplug my headphones, I tried a few changes in the sounds Control Panel, and I think I messed with everything... can you help me pls. ?

  Hello

  
  The device high definition audio you see the list is the audio embedded; you need the default audio output. Icon click on the speaker and set it as default value. Plug your external headphones and check.

• How to add sounds to the light icons in the taskbar when events happening?

  Well, my question is maybe very simple, I hope I can get help here, I ve been wondering how to make the icons on the taskbar sound when something happens for example when you receive a message 'Skype', the light of the task bar, but in my case they do not all sound the answer to that might be in the Skype settings, but, I want is doing the actual windows to make a sound to tell me something that is happening there, and of course I can chose the sound of that.

  the example of "Skype" might not be the best here, lets say another software, when is reduced and something happens, call your attention to the icon in the taskbar with start to glow, but sometimes I'm in another place, or looking for another way I could not miss this event in this software need my immediately attention with sound, I could turn on my loud speakers so I will be heard.

  Thank you

  Hello Derwyn,

  Thank you for your response.

  I appreciate your time and your concern.

  Unfortunately, the desired Windows sound is not included in the Windows sound scheme.

  However, in the article in the previous post on changing the sounds of the computer, you can see under the heading 'Windows Explorer' under the window 'events of the program'inside'sound'. You can find the other sounds of Windows Explorer as blocked pop-up navigation block, empty, trash, move menu items and so on.

  Thank you

• How to fix sound on computer Dell Optiplex 745

  Had a Dell Optiplex 745 under Microsoft's XP computer that has failed. Bought a Dell Optiples 745 computer rebuilt under Windows 7 premium. Connected to new computer equipment has remained unchanged since the original computer. Its worked OK on old XP computer but does not work on the new Windows 7 computer. Can anyone tell how to get the sound of the new computer?

  Thanks for any help provided.
  Ray

  Dell 745 is technically not supported under Windows 7 there is no drivers listed for her. However, I found the cabins of combo of Windows 7 available here http://en.community.dell.com/techcenter/enterprise-client/w/wiki/2065.dell-driver-cab-files-for-enterprise-client-os-deployment.aspx to halfway to the bottom of the page has solved a lack of Windows 7 drivers for the older two Dell and material not Dell question times. Scroll down to half at the bottom of page. Although the OptiPlex model figure not upgrade driver pointing to the cab file Wizard is working.

• How to cut sounds using the Commons of edges?

  Does anyone know how to cut sounds or raise the volume to 0 and save using the http://www.edgedocks.com/edgecommons#anchor_edgecommons_20

  Its a great way to use soundJS on board, but it is a bit incomplete, since it contains only play

  I tried to look in the API for using setMute (true); but I don't get a lot of mistakes in the edge when I try to do

  Anyone know a solve?

  To turn on or off the mute button click - the best way to do is to switch a variable to hold the mute State:

  code on Stage.compositionReady

  isMuted var = false;

  Call this function in your silent btn click event

  sym.onClickMuteBtn = function()

  {

  isMuted =! isMuted; / / Toggle the variable

  createjs. Sound.setMute (isMuted); / / set silent status toggled variable-based

  }

  If you really want to know if the sound is playing, see the documentation for SoundJS in SoundInstance:

  http://www.createjs.com/docs/SoundJS/classes/SoundInstance.html

• Replace original sound of the audio excerpt

  I accidentally erased my audio files from my hard drive.

  The project used a Zoom H2 audio with Dub.

  When I open the project and SKIP ALL (since the files are missing), the extracted audio shows on my calendar.

  Is there a magic wand that can allow me to place the H2 audio ORIGINAL by designating the audio extracted?

  I tried the function replacement in the project bin clip but that did not work, it is as if he had another point.

  Please let me know if you need more details.

  While CTI is in terms of the sequence, press F.  Who will load this element in the Source monitor, with good In/Out points.  You can then drag down just the audio to replace the part "extracted".

• How to fix sound on my laptop

  I have HP DV9700 Laptop with Vista home Premium OS. My speakers worked ok until last week. I get not all sounds now. It started with a few distore = ted sound and SO I down loaded realtek HD audio controller (latest driver for the sound) in a first time, it fixes the issue some what but now he has lost the sound alltogather. Y at - it suggestions, what could be the problem and how do I fix the sound problem?

  Hi HarshadAmin,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show outside the update audio drivers?

  ·         You get the error message?

  I suggest you follow the steps in the article.

  Tips for solving common audio problems

  You can see these articles for more information:

  No sound in Windows

  Sound cards: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• At the start of my laptop in MS Vista, an error box will appear 'PhytonDLL26 failed to reinstall. Sombody could you please tell me how to fix even that the computer shuts down.

  I tried reinstalling several times but with the same result.

  Hello

  You have made any changes to your computer recently?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you run the System File Checker and verify.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  See also:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• How to find and install the audio driver for HP A5HOOEA

  Hi all, have a HP Pavilion g6-1210ea 15.6 "laptop. Can't find an audio driver to install

  Operating system Windows7, error message keeps coming up no audio device installed

  Thank you, Sue

  Hi Sue,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• How to get sound from the speaker, while the headset is inserted into the laptop?

  In my laptop 15-E034tx Hp - Pavilion, I used the headset. While disconnecting the headset, the headset was broken. And headphones Jack of 3.5 mm of endpoint kept inside the laptop. You cut the wire. Only the tip of the helmet is inside the laptop. Now the speaker does not work because of this problem. If the headphone out only the speaker will work. Now, I want to how to disable the headset using software or Windows operating system?

  You should check the sound setting and depends on your sound card.

• DROID: Is there a way to fix 'sounds' in the text message?

  Just get used to my new phone and I have not found a way to include sounds with a text message. Second, is there a way to display text messages in a "zone of Envoy" or "inbox" only? Any advice would be helpful.

  YES! I got too ill attach a sound file to my text and I found a way to do it. If go you to the 'market' and download 'Handcent SMS', it's a free app, you can use it for all your text messages and when you select "join" it offers you the opportunity to join one of your audio files.

• I can't download my pictures from my camera or from disk. I get an error code. Someone knows how to fix this? The error code is 0 x 80010108

  I can't download my pictures from my camera or from disk.
  I get an error code. Ox80010108
  Any help? Enjoy

  Hello

  1 when you download the pictures?

  I suggest that you put the computer to boot and then try to upload the image, follow step 1 to set the computer to boot.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

• How to add sound to the General error handler

  I'm looking for an easy way to create a sound signal (beep or something) when the General error handler displays an error message.  Someone at - it suggestions?

  Hi Bill,

  make a shell vi containing the error handler and an additional function of "beep". And that's...

• How to fix formwork previews and audio-video/not synchronized?

  I have finally all my clips online and it seems when I play back two things happen:

  1. the video is super slow and I could go from one screen to the other QUICK see below, sound almost to the end of the clip the first image has changed!

  

  

  2. the voice-video seems very closed.  As I speak clearly, but the video is not followed.  I have a feeling that it is because of the formwork and using a ton of effects to turn and what not, but anyway to get around this?

  JUST as an info in this part, I was talking to a powder and clear the frame is behind by talking to me at all as I laid eyes LOL

  

  Hi Thaeyeballqueen,

  I have finally all my clips online and it seems when I play back two things happen:

  1. the video is super slow and I could go from one screen to the other QUICK see below, sound almost to the end of the clip the first image has changed

  2. the voice-video seems very closed.  As I speak clearly, but the video is not followed.  I have a feeling that it is because of the formwork and using a ton of effects to turn and what not, but anyway to get around this?

  

  See where it says, "Full"? Change this to 1/4 or more, and your reading will be smoother. In this case it is due to your footage. She is too demanding for the computer you are using.

  Change this to 1/4 your problems of two, or just one?

  If you are still having your second question, I have to find which video camera you used to shoot your video. Or did you use a webcam or a mobile phone to film the video? The answer to this question may hold the answer to your second question should you be that persist.

  Thank you

  Kevin