Replace original sound of the audio excerpt

Similar Questions

• In Movie Maker 6.0 can a video clip (with mute) be spliced in another video clip so it seems to work with the original sound of the first video?

  Hi, I put a video together for my MOM to 70th and one of her friends has provided a video clip of her playing a classical piece on the piano for several minutes.  I would like to cover this clip with other video sequences (landscapes, etc.) whereas the way piano since the main video track in the background.
  I tried to let fall the piano video file directly in the audio editing panel and then cut a second 20 segment in the video editing and insert a 20 second video (mute) images of landscape. However, the piano audio from the first video stops as soon as the strike chronology inserted piece landscape and picks up again when it ends, even if the audio scenario shows the audio piano continuously?  Am I missing a step or is this not possible?   Thank you very much.

  It should work quite as much as you described in Windows Movie Maker 6.0 (WMM 6.0), then maybe there is a step that is missed.  Let me describe how I could do and see if there's something you overlooked.

  First of all, I assume that you have already imported the clip of piano and your other clips of landscape in your collection then you can drag the there where necessary.  First, drag the piano music to the track Audio / Music in the timeline panel.  Note that if you have your video extended timeline, it will show video, Transition & Audio, but you want to get off- below that, to the Audio / Music , to follow.  At this point if you play your 'film', you should not to see any picture but just to hear the sound of the piano.  You should also only see a waveform on the audio / music.

  Now you can put anything you want on the video track.  Let's start by putting another copy of the original video of piano, but this time on the video track.  If you have developed the video track (to see the Vidéo/Audio/Transition) you will see the video piano and its associated audio waveform.  However, in your case, since you already have the audio separated, you want to cut that his partner.  Right-click on the Audio (attached to the video) track and select Muteor use the menus (Clip > Audio > Mute).

  When you preview the project, you have synchronized video browsing with the original copy of the audio piano.  At the point in the video where you want to replace the video with another piano play, making a split (key M).  Make another split at the end of the section.  It is very import that select you the video track when you add new divisions and you have not also be divide the track Audio / Music .

  Important: You want to make sure this divide the part that has the exact duration as well as landscape images, you want to replace.  So if you have 20 seconds to add, you divide 20 seconds piano images.

  Right-click on the part of piano footage (video track) and choose Remove.  Then, insert the part of sequences of landscape (also on the video track) in its place.  Once again, you will have need put this added sequence muted landscape (Clip > Audio > Mute).

  You should now see and hear the piano play.  Without any change in the audio playback in the preview window should implement the landscape images, then returns to piano images.

  If you find that your project is not behaving correctly after these splits, but are you sure that you have followed these steps, it could be a problem with your video file types.  If in doubt, try to convert all your videos to .wmv format using something like Freemake Video Converter (freemake.com)

  In any case, I hope that you are able to achieve, because it is certainly possible.  Good luck and post back with further questions or information, you can have.

• How to fix sound on the Audio 1 track?

  I have Prem comp 12, but no experience. I have lost sound on the Audio 1 track. Have a sound on the Narration track. See the two lines wave on the track. Thank you

  Erics

  On what computer operating system is your first items 12 running? Have you updated 12 to 12.1 yet with a project open Help Menu/updates to date. If this isn't the case, please do.

  You have audio on any other track next to the Audio 1 and Narration track? Lost audio on 1 Audio once you added narration to the Narration track using Narration of the program tool?

  If you have 12/12.1 and have experienced loss of the numbered audio track audio and/or Bo when the narration of the storytelling tool has been added to the Narration track, then it is most likely that you have a problem known to first elements 12/12.1 which is described in the following blog.

  First Elements ATR troubleshooting: ss12: Audio dropouts after addition of Narration

  If this applies to you, please try the solution of Llamadude and determine if one of the solutions in the blog works for you.

  We will follow the result.

  Thank you.

  RTA

• Change the audio settings

  Is is possible to modify all the audio data in a Captivate project as FM? I need to do audio as slide background sound that is already in the project. If it is possible, how would I go all this?

  Your process should be to have the original sound in the project at the highest possible quality and then just set the audio output quality of quality FM (64 Kbps).  Then when the audio is exported for release time and compressed in MP3 format in the output of all quality FM.  You don't need to do anything other than that, if you start with the highest quality in the project file.  Usually, I use 128 Kbps as a source and publish to 64 Kbps.

• I can't hear you tube videos or sounds in the game.

  Hello
  I use a new computer. Entry door. Windows 7. I use Teamspeak 3 and I try to play you tube videos or a game. I can hear my friends on Teamspeak 3 but can not hear the video or music / sounds of the game.

  Please help me if you can. My computer knowledge is above average, but not anywhere near enough to isolate this problem on mine.

  Thanks in advance.

  Jon

  Hello
  Welcome to the Microsoft answers site

  (A). I suggest you to run the audio troubleshooter. Check out this link.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  B. check your audio settings in the game to make sure that the sounds are turned on and that the cursor is high enough so that you can hear them.

  C. check the meter of volume on the value max/reactivate the sound plugin window?
  Increase the volume on your speakers.
  Activate/reactivate the sound upward the audio volume level? (speaker on the taskbar icon)
  See if you have set your audio device by default:
  1. start
  2 Control Panel
  3 sounds and Audio devices
  4. audio
  5. Select your audio source by default (acoustic/adapter card your speakers are currently connected)
  For example, C-Media wave, Realtek device driver audio etc.
  6. check the box "Use only default Devices", and then click OK

  D. reactivate all audio sources
  1. go in Control Panel.
  2 sounds and Audio devices
  3. in the 'Volume' tab, click on "Advanced" in the section "the Unit Volume."
  4 try not silent all audio sources, if none of them are dumb.

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• First Elements 13: Mounting a WMV distilled from a PowerPoint... Can't see the Audio track

  I am someone help with what we thought would be a minor change task. We have a WMV file created from a PowerPoint presentation (and no, we don't have access to this old PowerPoint). We need to move some of the video autour, but leave the audio the same. When we added the media, we can see the video and hear the sound, but the audio is not on a track in the timeline panel.

  For some time I used the first. The answer lies in the conversion of PowerPoint to .wmv? Is this why we cannot see a separate audio track? Any help would be greatly appreciated.

  Richards_Daddy

  I hope this will be new to the program rather than a question of serious program concern.

  I am basing my optimism on your statement of "when we added the media, we can see the video and hear the sound, but the sound is not on a track in the timeline.

  What version of Premiere Elements are do you use and which operating system is involved?

  For now, I'm going to presume first items 11, 12/12.1, 13/13.1 on Windows 7, 8 or 8.1 64bits.

  In what specific workspace to the project are you? You are in the area of Expert work or fast.

  Fast working space is not a dedicated numbered audio track.

  If you are in space and quick work of his film, then go to the workspace Expert with his script numbered video tracks, audio tracks numbered, track of Narration and soundtrack.

  If this isn't the problem, then we can move on to other factors related to the issue.

  Thank you.

  RTA

• Visual 'amplification' of the audio track

  I'm in first 10 items and find very useful Visual representation of sound in the audio track.  However, the only noise that disrupts the horizontal line are relatively strong.  Other quieter sounds - especially speeches - often cannot be 'seen '.  Is it even when the expansion of the track audio on the screen to get a longer view of the detailed sound wave - I find very useful when editing?

  There are 2 settings for all follow the heights. Click the icon to the left of the track to change.

  Try to 'normalise' the sound. Sound waveforms should fill the height of the track only where there is a strong PEAK but its normal should be about halfway up.

  If the sound 'waveform' is very low, it means that source material is recorded too low. Maybe you have an error in your camera?

  Maybe her camera has been set to loud sounds or its automatic system volume is not working properly or not turned on,

  Cameras sometimes have a 'boost' for soft sounds setting. Try this if yes

  Sometimes a defective electret microphone peaks ranging in a sense, this half of the average level (and causes a slight distortion)

  The average level of the floor at a normal level should be approximately 6 dB below the highest peak (spike in the wave form).

  Sometimes a noise intermittent lound may require the rest of the sound in a clip down due to the automatic level system in any camera.

  You can restore the level of any clip to "normalize" it. (To select in the menu after selecting the audio clip to normalize)

  This sets the peak the HIGHEST in any clip to the max level and if this pic is already lower then the maximuim then evokes the full clip as well.

  If a spike as a rugged camera is in the way, you can zoom in on the cob, cut sets share and other advanced and reduce just the level of the edge of say 6 DB, and then normalize the whole claws on each side of him to bring it all back to normal.

• Replace the audio track on a video

  So I cleaned up the audio on my video interview with hearing, now, I would like to replace the old audio on existing video in first, I know that I can make a new sequence with the new audio file in separate but I prefer to replace the old audio track, because it makes editing more easy at first, is there a way to do it?

  You can merge the video with the audio again.  This process will give you the option to remove the original sound.

  However, this creates a new clip merged, which has no impact on what already either in a sequence.  If you have not done no editing, however, it's a good way to do.

• audio files do not play sound after the restoration of the links

  I recently moved to a project from one disk to another.

  When I opened it the project folder I had to recreate a link to all the media which seemed to have a lot of success. However the audio files do not seem to play any sound. When I tell one of the audio files in the finder window, it take me for an alias file. When I try to open this file, it indicates that the original file cannot be found.

  I tried to remove the entire library of files sound and re-import them back in. But still, it does not solve this ridiculous issue.

  Any suggestions?

  Thank you

  Karl

  Are music protected audio files?

  Russ

• Satellite A30 - no sound after installing the audio driver

  I've updated the audio driver on my laptop A30 today on the Toshiba site with download of Realtek Semiconductor Corporation, and now the sound does not work. It's my single stereo so I feel really bad. The original driver discs are stored and I'm not very techie so help please...

  Thanks a lot for your time, Phill

  Hi Phill,

  First of all, I would like to check the sound settings in the control panel to make sure that none of them are extinguished, and that "dumb" is not checked. Also check that the volume on the side of your A30 control is enough at full volume.

  In the case where everything is set correctly, I would then reload the driver Realtek of the utility CD and tools of Toshiba. If you do not have access to the CD then you can restore the driver to its original state by selecting the audio device in Device Manager"and roll back driver it.

  If all else fails you should be able to 'restore' your system from the last point before your installation of the new driver restore.

  HTH

• Impossible to install the audio driver and the sound.

  Original title: there is a problem with the sound I don't have it at all, he said that there is a problem with the driver for NVIDIA high definition audio and put it back in place could help, but my computer will not reinstall.

  There is a problem with the sound I don't have it at all, he said that there is a problem with the driver for NVIDIA high definition audio and put it back in place could help, but my computer will not reinstall.

  Hello

  1. What is the brand and model of the computer?

  2. you make changes that caused the problem?

  3. what operating system do you have in the computer?

  I suggest you check out the links below to fix sound problems in the computer. The suggestions apply for Windows 7 and Vista.

  Method 1: Follow the instructions in the links below:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 2: update the audio drivers for the sound volume number:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  It will be useful.

• No sound - get the error no active mixer device or no audio device installed

  Original title: downloads for devices sound cards/audio/active mixers
  Hello, I got my laptop crash currently and when I came back, I have no sound except for the beeps. I can't hear CDs or audio files on different Web sites. I can livestream and see a video, but not hear. I plugged headphones and have the same results. I get the error codes are no active mixer device and there may be no audio device installed. I have a windows xp operating system. I don't know where to go to start a download for sound cards.
  Thank you.

  Miloz

  We can try to install the drivers manually. It seems that every time that your device has crashed, someone reloaded Windows without having to install the device drivers.

  Let's start by trying to install the audio driver first. This one we might have to do it manually, but the others should be automatic. This gives a test:
  1. go to: http://downloads.sourceforge.net/sevenzip/7z465.exe and download the 7zip archive manager
  2 download, register, and install the utility on your computer
  3. once the utility installed, go ahead and re - download the audio driver package
  4. save the package on your desktop (or somewhere easy to access)
  5. once the package downloaded, find him, do a right click and choose "extract here...". "or something similar in nature. Basically we will extract the contents of the package and install it manually
  6. once the content is extracted, click START
  7. in the menu START, right-click on "Computer" and choose "Properties".
  8. in the upper left corner, click on Device Manager.
  9. find your Multimedia Audio Controller, right click and select 'Update Driver'... »
  10. click on "Browse my computer for driver software".
  11. click on the button 'Browse' at the top
  12. place where are the files extracted from this driver package
  13. Browse in the folder extracted and select the listed file. If there are several of those who choose an and and if it's just, the Setup will continue. If this is not the case, the installation program displays and error and then you just go back and try the alternate
  14. from there, the installer should walk you on the rest of the steps to manually install the driver package
  As far as your other drivers go, I would recommend going to the bridge site and looking for a driver of Modem for your computer model. The audio driver should be supported at this stage, and the Ethernet driver can be a joint wireless adapter you have. You may need to find a driver for it on the site of the gateway, OR if you bought the adapter you need to go to the device manufacturer's Web site and get you a driver there.
  Let us know what happens
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success.

  original text: P17.sys

  I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...

  Hello

  1. What is the exact error message you get?
  2. Are you not sound on the computer or Rocketfish?

  If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Otherwise, I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.

• How to replace the audio driver by default and applet on Windows Vista Home Premium Dell Inspiron 1545 laptop computer?

  I had sound problems and got a pop up saying audio applet did not work, I chkd the sound test in Control Panel and drivers in Device Manager it says all drivers have been updated and had a MS Mr. Fixit scan and everything said it was OK. Also I went to chat with and MS engineer who just told me to do the things that I had already done so who did not help either.  Then, I lost all sound and when I went and chkd Manager of devices, he said that the sound driver was not installed, I went to Dell to have a driver update installed thinking to recognize the missing driver and install it but that didn't work. I can't find something at Dell who tells me how to install the drivers by default/applets. I got chk Dell for updates of pilot and analysis says that it does not work on something more old then XP but my OS is a Vista Home Premium so I don't understand that, I ran an another Mr. Fixit scan but it showed no problems. I suspect it is the applet which has stopped working and it gives a wrong signal that it is the driver that does not work when it is the applet which poses problem. Is there a scan which analyzes all aspects of the audio system and will repair or replace or at least give me a list of things that need to be replaced or updated? Any help would be appreciated I tried to solve this problem for the past two months and I really want to fix this now if possible.

  Hello

  Create a new user account and check if the problem persists, if the problem does not persist in the new user account, then you can fix the damaged user account.

  Create a user account (Windows Vista)

  Screw a damaged profile (Windows Vista)

  Good day!

• Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer

  Original title: speaker FOR desktop

  In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack.    The device is installed REALTek.   When I play songs or video, he said: -.

  "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  How to solve this problem.

  Hello

  I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.

  I would like to know some information:

  1. Have you tried to plug any other speakers or headphones?

  2. You did changes to the hardware/software before this problem?

  3. Have you tried using these speakers with another PC?

  Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Media-Player-cannot-play-the-file-because/7faf6bdb-6a4e-4B5B-b5a9-2119907d953e

  Hope this information helps.

  Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.

  Please get back to us with an update on the issue, we will be happy to help you.