How to fix the folder flashing with question mark on mac pro

Similar Questions

• iMac G3 tray charger stuck on the gray screen with question mark flashing folder

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark. Not only it does not maintain the keys C or Option, but it will not start up any combination of keys, such as resetting the PRAM or the NVRAM. It just starts and stays on the screen with the flashing folder does nothing. It CAN read the keyboard, because I can turn on the computer with the keyboard, it just won't start to the top of any disk or any combination of keys. Any ideas on what could be the problem? I just replaced the hard drive, but it was the same before I replaced the hard drive as well. In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  I recently bought an iMac G3 (charger tray, 333 MHz, M4984) and when I try to boot from an OS installation disc 10.3, there will remain only blocked on the gray screen with folder flashing with the question mark.

  Valid operation system not found.

  Not only it primer not leave now pressed the C or

  Place the cd in the drive.  power off.  Hold c power key on & while in the startup is underway.
  

  Keys options,

  key option is not supported on tray loading imac g3 333

  In addition, the iMac had apparently OS 8.6 installed on it when it came, and I think I need to move to OS 9 and do a firmware update before you install OS X (correct me if I'm wrong), but I can not do because the iMac does start not in general of any combination of keys. Thanks in advance, any help is appreciated.

  It took charger slot, but I think that optional for the bin.  I think that you can upgrade the firmware with 8.6 for trays.

  You may need to reset the PRAM and NVRAM and Mac's Open Firmware. Stop the Mac, then it turns on and before the screen lights up, quickly down the command, Option, P, and R keys, until the Mac rang twice more after the power to chime.

  Then, before that lights up the screen, hold down the command-Option-O-F until the Open Firmware appears. Then enter these lines, and then press return after each of them:

  Reset-nvram

  Configure default

  Reset-all

  "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings. »

  http://support.Apple.com/kb/TS1812?viewlocale=en_US

  In the case of the...

  Try taking the battery for 10 minutes.  Put back in the battery.  Fingers crossed. Turn the machine back on.

  How do I eject the cd from the internal drive:

  eject the cd

  List of devices:

  devalias

  List of variables:

  printenv

• How to keep the folder tree with Save as

  Hi all

  An issue involving PS CS6 and Win7/64...

  We just finished a 3 day of shooting for 600 people conference, which involves many workshops.

  Our all finished TIFFs folder tree is organized by date, then by theme and get out.  Overall there are 75 files in the tree view, with nearly 700 TIFFs.

  The customer wants the two hi-res and lo-res jpg (not TIFF).

  Got a drop very simple that will convert a TIFF file to JPG, but works only on a particular file and exits in a generic folder (so I need to copy these back).

  Is there a way to create a droplet that will be

  a browse of the source and convert the TIFFs of each file in JPG, as well as

  (b) have PS create a corresponding tree drop jpg files into the corresponding folders?

  I know there is an option to include all files when you perform the conversion, but (b) is the critical element so I don't have to do this in a folder by folder basis.

  Thank you very much!

  Jerry

  Unless you're writing a custom script, no you can't use a droplet

  There are a couple of processors that support the creation of a folder tree.

  Pro image processor
  http://russellbrown.com/scripts.html

  Image converter
  http://www.scriptsrus.TalkTalk.NET/pp.htm

• How to fix the pages flashing and goes black when I the same scrolling so I reinstalled?

  Often but not always the Firefox window turn black areas. This includes menus and data entry fields. Sometimes a page opens OK but turns black as soon as I start to scroll by using the mouse or the scroll bar. Random positions in the scroll of the page is displayed again, but the problem persists. If I run Firefox in safe mode, the problem goes away. I tried to uninstall and reinstall Firefox without success. I also tried to disable plugins without success. Also, I used the option "reset Firefox" without success.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• How to coordinate the my music on my book of mac pro with my iPhone?

  I subscribe to Apple music on my OS X, but cannot get it on my iPhone. What should I do?

  What iPhone do you have and which version of iOS? It takes a minimum of 8.4 for music to Apple iOS.

• 2008 mac book pro screen flashing folder with question mark at startup

  2008 mac book pro screen flashing folder with question mark replaced boot hard drive and cable, continues to do the same.  any ideas to fix?

  Start your Mac by holding down the button Option. The should launch the window of Boot Manager where you can select the startup disk, and then click on restart.

  How to choose a boot on your Mac - Apple Support drive

• Flashing symbols on startup: apple logo, circle with slash, folder with question mark

  I tried to delete personal files on my MacBook (late 2008) to trade. During this process, the computer lost some function when deleting some documents; would not open apps but app could bounce constantly once selected and would not restart or shut down, had to manually hold the power button to turn off.

  When I turned it back after a few minutes a blue splash screen came as normal then symbol of Apple but then started blinking circle with slash to Apple to the circle and then to the folder with question mark. This continued for more than 45 minutes + and whenever I try to turn it off and restart it manually.

  I tried the following:

  -Trying to access the disk now command + R to start utility

  -Unplug the charger and take out the battery and put back in

  -holding SHIFT while symbols are flashing

  I can't check what OS I currently use but care I have the computer are as follows:

  -Computer is late 2008 model MacBook 13 inch

  -Model: A 1278 (EMC 2254)

  -Storage: 160 GB

  -RAM: 4 GB

  -Processor: Core 2 Duo 2.0 13

  Looking for help solving this problem. Thanks in advance.

  It would be very helpful to know what version of Mac OS X you are running

  On the screens, you see when you start your Mac - Apple Support

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• How do I access the folder allowed with standard user?

  I have 2 accounts, one is standard, the other is the admin account.

  My PC has a permitted record that only allow admin to access.

  I always connect with the standard user and sometimes need to access these files from parmitted, but no authorization for the standard.

  So, every time I change the user access. It's too boring.

  I tried the command runas, but does not...

  Please give me some advice that can access the folder allowed with the standard user, if possible.

  Thank you

  I have 2 accounts, one is standard, the other is the admin account.

  My PC has a permitted file that allow only to admin for access to.

  Please give me some advice that can access the folder allowed with the standard user, if possible.

  You must change the permissions of this folder so that everyone has full access.

• Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install?

  Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install? True, it is that it is already installed on your computer. If hide us, an another previous KB2570791 arises in our updates of Windows and asked to install anything, that it was installed... of the questions repeated and very annoying.  Help, please!

  (Microsoft Answers just sent us message have deleted our previous thread, ask for help!) We are simply not that these problems are problems with Windows XP updates related to DST or not?)

  Nadia. PA supporter said that your computer is hacked. He may be right. I can't weigh because I don't know what led him to this conclusion. If your computer is hijacked, then you should address that more that you need to fix this minor update. However, under the resolution of your problem to update, you can try this:

  Assume Windows XP

  Check the C:\Windows\System32\ directory for the presence of the file tzchange.exe

  If the file is not present or if the version of the file is not 5.1.2600.6171 or newer...

  Download the update appropriate 2633952 for your platform here:

  http://support.Microsoft.com/kb/2633952

  Run with - extract switch (e.g., Start > run > "[path to the downloaded file] \WindowsXP-KB2633952-x86-ENU.exe"-x)

  Of course, replace [path to the downloaded file] with the path to the downloaded file.

  Citations may or may not be required depending on the path. Place the x - out the citations if you use them.

  Choose a location for the extracted files (a new folder is recommended)

  Locate the extracted files. File tzchange.exe you want and copy it into C:\windows\System32

  That rerun Windows Update detection to see if the problem is resolved.

• After update Macbook, I had a folder with question mark on it

  I was forced to upgrade my macbook, and then I saw a folder with question mark in this regard.

  Start your Mac by holding down the button Option. Who should start the Boot Manager window where you can select the startup disk, and then click Restart.

  Startup Manager: how to select a boot volume

• How to fix an SD card with a (not mountable in file systems of error)

  How to fix an SD card with a (no file mountable systems error)?

  Use disk utility to reformat the SD card - all data will be entered (lost).

• I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

  You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

• How to calibrate the PCI-6110 with NOR-DAQmx

  Hello

  I am a new user of the PCI-6110 Council tries to run the calibration using LabVIEW procedure. I look at the document "Calibration" on the page of the manuals for the Board of Directors,

  http://sine.NI.com/NIPs/nisearchservlet?nistype=psrelcon&NID=11888&lang=us&q=FQL: 28locale % 3Aen % 29 + AND + % 28phwebnt % 3 A 1081 + OR + phwebnt % 3 A 7075% 29 + AND + 28nicontenttype % 3Aproductmanual % 29 + AND + % 28docstatus % 3Acurrent % 29% 20RANK % 20nilangs: en & title = NOR + PCI-6110 + manual

  One of the first steps in the document is to call the AI_Configure command to set the input mode, beach, etc. I'm using LabVIEW 8.5 with the NOR-DAQmx software, and I can not find the command (which, in LabVIEW, seems to be "AI Config.vi") anywhere. The calibration paper was written in 2003, and I gather from Google searches (please, correct me if wrong) that this command is actually a part of NOR-DAQ traditional, who was replaced by driver OR DAQmx.

  My question is this: what is the equivalent to AI_Configure command in the latest software? Is it perhaps a subsequent document describing how to calibrate using NOR-DAQmx?

  Thanks much for any help.

  Tom McLaughlin

  Hi Tom,

  The calibration Procedure series B, E, M, S, which is also linked from this page, describes how to calibrate the PCI-6110 with NOR-DAQmx.

  Brad

• How to fix the microphone in Compaq Presario R3000

  Original thread title - how to fix the microphone in Compaq Presario R3000?

  Hello
  I have a laptop Compaq Presario R3000, and I tried to use Skype on it. Problem is that the other end can't hear me. I tried all the suggestions on the site of Skype to try and attach the microphone.  I tried the recorder (click programs, accessories, then entertainment to access), but when I record my voice, nothing, so I guess it has something to do with the microphone. Just to be sure - this model has an internal microphone? What I've read, it seems that it does. I downloaded the updated drivers, so I don't think that's the problem. Any suggestions? I'll try anything now, because I spent about 6 hours online trying to get the microphone to work and so far, nothing. Thank you! Patti

  Hello

  1. What problem is only on Skype?

  2. were you able to use this microphone earlier?

  3 have there been any changes made on the computer before the show?

  4. what operating system are you using on your computer?

  I suggest you to consult the steps mentioned below and check if it helps.

  Run the troubleshooter of sound recording
  Click on the link below and run the troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  See the following Help article.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  If the problem persists, then I suggest you to contact Skype to get help.

  https://support.Skype.com/

  It may be useful