How to fix Windows XP?
I've just recovered from the error that says "Windows\system32\config/system is damaged or missing" in inserting my XP installation disk and choosing to install a Windows fresh on drive D rather than c. drive C already Windows out there (my bad Windows) and I didn't want to not crush him because of all my drivers and programs, etc.
How can I repair my installation on drive C?
Thank you
Lewislite
Hello
Try to get Microsoft WXP CD (no recovery media) facilities and use the repair option. You may repair already preinstalled WXP Basel. If you have more question about the Windows repair option please write again.
Tags: Toshiba
Similar Questions
-
HOW TO FIX: "windows Explorer has stopped working" / "windows restarts.
HOW TO FIX: "windows Explorer has stopped working" / "windows restarts.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed
Hi João,.
To help solve the problem, remove the PC from the domain and then connect the computer to the domain.
Click the Microsoft KB Article below for troubleshooting steps.
The trust relationship between this workstation and the primary domain failed
Let us know how it goes.
Thank you
-
How to fix windows photo viewer showing the class not regitered error in the local system.
Dear all,
Please provide me the solution.
How to fix windows photo viewer showing the class not regitered error in the local system.
Thank you best regards &,.
Amol.
Hello Amol,
Were there any changes made on the computer before the show?
The problem may occur if there is a problem with Java on the computer. I suggest you to check the link and try to update Java:
http://www.Java.com/en/download/help/download_options.XML
http://www.Java.com/en/download/index.jsp
Let us know the results.
-
How to fix windows script error c:\program files\safeboot\AutoDomain.vbs
Whenever I start my laptop, this error appears twice. I have to click OK twice before starting Windows. What caused this and how would approach I solve this?
This error appears twice when starting my laptop. What causes this and how to fix it?
Thank you in advance!
Sharon
Hello Sharon,
1. have you done any hardware changes or software on your computer before this problem?
2. your computer with any domain or server is?
If you have McAfee installed, you can uninstall McAfee. If the problem persists, reinstall then it & check:
Hope the helps of information.
-
How to fix windows vista update when get massege 80070005 error code
by updating windows, I'm me massege error code 80070005
How isolve this problen
Hello
You did changes to the computer before the show?
Please follow the steps below.
Method 1:
Run the Microsoft fixit for the link.
http://support.Microsoft.com/mats/windows_update/
Method 2:
Follow the steps in the link.
-
How to fix Windows update error 80072efe or 80072f76
I need help to download properly update 8007371B.
I am running Windows Home Premium 64 Bit
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
-
How to fix \windows\system32\confjg\system
what computer turning on a note comes up saying: Windows didn't start because the following file is missing or damaged:
\WINDOWS\SYSTEM32\CONFIG\SYSTEM
How to do a repair installation to repair Windows 7
This will show you how to do a repair installation (aka: install upgrade on-site) for fix your currently installed Windows 7 and preserve your user accounts, data, programs and drivers of the system.
http://www.SevenForums.com/tutorials/3413-repair-install.htmlNo-reformatting of Win7, non-destructive reinstall
http://WindowsSecrets.com/top-story/WIN7S-no-reformat-nondestructive-reinstall/Note: create if possible a Backup of the Image before you start Windows.
This is your backup in case something goes wrong.
After you have repaired your PC and then create a new backup 'Last known good configuration' Windows.EaseUS Todo Backup Home V8.6 http://www.todo-backup.com/home/home-backup.htm
Free version: http://www.todo-backup.com/products/home/free-backup-software-features.htm
(Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
Supports version 8.6 XP, Vista, Windows 7, Windows 8 / 8.1 and Windows 10J W Stuart: http://www.pagestart.com
-
How to fix Windows update configured to never install drivers
None of my USB sticks work, says no driver installed. Troubleshooting report says "windows update configured in a way to never install drivers". How can I fix?
Hi Phil,
Thank you for your update on the issue.
- Have you tried to connect your USB stick with all the USB ports on your system?
- You are able to install all Windows updates.
As you have tried to choose the option always to install the best driver from Windows Update software already, I suggest once, click the radio button for Yes, this automatically (recommended), save changes and check if the problem persists.
Also, I suggest you try to remove and reinstall all USB controllers and check with the question.
- Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the list of the categories of equipment, locate and expand Bus USB controllers.
- Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
- Restart the computer and let the USB controllers get reinstalled.
- Plug in the removable USB device and test to make sure that the problem is solved.
More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly
Please post back your results for assistance.
-
How to fix Windows Media Player as he cut about 5 seconds before the end of each song?
Original title: Windows Media Player turns off about 5 seconds before the end of each piece. Should I uninstall and reinstall the drive to fix?
Windows media player cuts and in about 5 seconds before the end of each song played: How can I fix. The problem is definitely with WMP, it does not work with other players on my PC.
Hello mckendrick,.
Sorry for all the questions that you are experiencing with Windows Media Player.
I have included a link here to a convenience store for Windows Media Player. It can help to identify potential problems with codecs.I hope this can help.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Satellite A-C55-1N1 - how to fix Windows 8.1 after trying Linux?
Hello
Laptop: Satellite C55-A-1N1
In my infinite wisdom, I tried to install Linux in dual boot as my old laptop scenario. I have narrowed the main partition of windows in windows 8.1 first and then installed linux on this partition. After the reboot, Linux worked, but not windows, because I had to disable the secure boot and set bios to the CSM for linux to load.
After turning on and bios secure boot to EFI, windows boot more. I tried to repair the windows operating system by running the repair of another DVD of Win8.1 tools, but they do not have repair startup. I learned eventually to zero to start takes you to the... except hidden restore partition my not!
So, I checked the windows and the recovery partitions are intact but I can't access the recovery partition or repair the windows installation with windows 8.1 repair tools. No, I have not all backups, other images or system restore options. Clever, aren't I? I don't have the original recovery partition (which I can't access) and the windows partition to play with. I don't want to lose my license OEM Windows 8.1...
Any ideas how to save this installation of windows?
Thanks in advance for any help.
You have made the same mistake as many other people. On this forum, we discussed many times how it works and tried to explain how it works.
In s manuals are described clearly that each owner of the laptop must create a recovery (DVD or USB) media and this created recovery media can be used for recovery image installation where this HARD drive recovery option does not work or if the HARD drive is faulty and should be replaced.
As I see that you do not have this recovery media. Is that HARD drive recovery facility can be started if laptop has only factory settings. Your experience of Linux, this option disappeared and there is no way to start it again.
What can you do now? I know it may seem stupid now, but if you want to install original recovery image you need to order new media of recovery and it can be done on https://backupmedia.toshiba.eu/landing.aspx
-
Re: How to fix Windows components?
How to repair the individual Windows components without format & reinstall the entire operating system?
Here the operating system is Vista
Hello!
I think you should give us a little more details like your laptop model.
And you should say what you mean exactly.
It is not clear from what you have posted.Look in the control panel and Add/Remove programs. You change the Windows components and remove the software.
Good bye
-
How to fix Windows Update error code: 80070424
Tried to install "Microsoft Fix It" but PowerShell installation failed. Windows Vista Edition using Home Premium 64-bit. I am currently totally impossible to install updates and it becomes really frustrating. I cant even install the printer due to the system drivers is not not to date.
Hi Kyle,.
You have made any changes to your computer recently?
I suggest you to follow the steps in the link and then check if it helps.
Error message 0 x 80070424 when you use Microsoft Update or Windows Update Web sites to install updatesI hope this helps.
-
How to fix windows Defender I get error OX800705b4
I can't turn on my windows defender and I get the above error message. Please note that I am not technical minded. So don't have an idea that I tried all that.
Hello
read this information on the Defender:
· If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default
the basics of Microsoft security has its own version of windows defender
and other anti-virus programs use their own particular type of application to scan for spyware and malware
It of nothing to worry and is the default action, which is designed for them to do
If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable
and here is the method to remove it from startup in vista
http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/
and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools
http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/
and if you need to change startup programs read this information on the other methods of doing it without using defender
using msconfig read this tutorial:
How to use MSCONFIG in Windows Vista
Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup
http://netsquirrel.com/Msconfig/msconfig_vista.html
and also try this FREE program Autoruns:
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more
-
How to: fix Windows Vista Home Premium SP2
I don't have a CD or DVD containing the operating system I use now. I DO NOT WANT TO REINSTALL or RECOVER the operating system. I would lose a lot of valuable information.
I would be sincerely grateful to find a 'repair' for this operating system. Microsoft offers a service to REPAIR an existing installation of Vista Home Premium?
Jeff
Hello
Microsoft does not include disks for OEM preinstalled computers, Acer, HP, brands etc.
a repair install is performed from a vista operating system
you will need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
and note the part about uninstalling Service Packs, if necessary
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
And if you need to do a startup repair and that you do not have a Vista DVD from Microsoft, read this:
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
If you ever reinstall Vista
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
How to replace Microsoft software or hardware, order service packs and replace product manuals
Maybe you are looking for
-
Re: BSOD STOP: 0x0000007B on Satellite A355 and Win XP
Hello I just bought a Toshiba Satellite A355 of Costco in the States. I received the following error message when I tried to install XP: "STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000). I applied the fix suggested by tony_roti in t
-
Mac: How do I change the default printer by application
Hello I use a HP OfficeJet 8600 and impossible to find a way to set the default print by application options. When I use my Windows machine he remembers the print by application settings (for example, if I print from Word, it prints the ordinary qual
-
NFS server crashes in Windows Server 2008 Std Edition
Hello My problems together: -. 1 NFS Client - Linux... Get in Windows Server 2008 Std Edition NFS server. 2 NFS Client and Server services failed to restart. 3 NFS Server crashes regularly and following several times to restart, windows all invited a
-
X 360 spectrum: spectrum x 360 HP Touchpad
After upgrade to Windows 10, when using the trackpad, if I press a key on the keyboard it will cause the trackpad to be turned off for a while. I tried turn off SmartSense in Synaptics ClickPad properties and tried to adjust the windows for Mouse & t
-
Content of the ASA CX filtering, looking for suggestions
I wanted to get some feedback on how the rest of you the security people do web content filtering. The CX did a great job with HTTP but when it comes to HTTPS there leaves a lot to desire. When the CX first went live, it was configured to decrypt all