How to follow the camera with a quick movement (photographed close)

the shot is close green screen and a fast movement and camera cut markers.

any ideas how to solve this problem? I knew I may had to shoot again, but its impossible because the actors are not here anymore. If I have to fix it.

No matter what plugin recommend or technique?

This photo will not follow with any software that I know.

There are a host of problems that should give you a valuable lesson. First of all, track automatically to set unique geometry that is big enough to get at least 100 pixels of detail of. This means at least 10 X 10 pixels. There is nothing in the background of your ball in any image, with the exception of a few markers that come close to bing big enough to ensure the monitoring of follow-up. As the follow up to the camera, you will need to establish at least 2 planes that are far enough to calculate changes in perspective and parallax. Your photo does contain yet one of the elements required to keep track of the camera.

The only plans in your shooting are net in the background and the ned in the objective. Blur of movement and wrinkles in these two plans you provide nothing to track. You also zoom out of frame 7 frame 12. NEVER EVER ZOOM if you intend to replace a background or a camera do follow. Above all, do NOT autofocus. It is almost impossible for camera tracking software to calculate a zoom of the camera when the zoom blur. A glance quick pan and zoom is almost impossible to keep in the best of cases.

It will also be impossible to fire a clean key because the net in the background is subject to a lot of black lines and white NET in the goal gets completely blurred out in a large part of the shooting.

Just a bit of pre-production planning and some storyboards would have saved the day. You have created a situation where your only option is to roto your actor and the target frame, and then re-create the net and the background by hand. What should have been a half hour in post will turn into a few days, unless redraw you on it together to be something more stylized way. There is so much noise in the shooting of nets and the motion blur that RotoBrush will not follow anything other than a single image. You're going to have to cut your player by hand and rebuild the background and adjust the position, rotation and scale by hand one frame at a time. Do not count on making money on this one. There is not enough details around this one even to stabilize the shot to make it easier to roto. I tried.

If it were my project, I would leave this one out or roto actor, throw in a bunch of lighting effects and completely forget reality to put this photo in a chart instead of a film.

Tags: After Effects

Similar Questions

  • How to follow the line with the vision of the webcam and move along in this

    Hello world

    I have a question that I can't really find a topic about it.

    Currently, I had made my rover robot wireless control using a 3-axis joystick and works perfectly.

    But I want to add some features to the vision on board the rover system.

    I'm doing the webcam to detect a black line on a white background, and then, he moves just independently along the the line black.

    The thing is that I only know abit about installation in a vision... So, if anyone here able to guide me on the way?

    I use filtering color or color matching or model of a match?

    How to make sure that the black line remains in the middle of the vision? (Eg. moving itself at the center of the line within his vision)

    How can I control the engines using the achievements of the vision of the foregoing?

    Hey,.

    Your questions:

    I use filtering color or color matching or model of a match?

    Pattern Matching or Color Pattern Matching would slow down.

    I would use a 1 d Simple edge detection that returns the coordinates and the edge angle.

    How to make sure that the black line remains in the middle of the vision? (Eg. moving itself at the center of the line within his vision)

    You must control your motors that for example the angle is 0 degrees or 90 degrees (depending on your coordinate system) all the time.

    How can I control the engines using the achievements of the vision of the foregoing?

    This robot manual should tell you how to control the motors.

    Hope this helps,

    Christian

  • In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

    In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

    Hello

    You can check the link, download the manual to link Total perform operations.
    http://www.centralillinoissecurity.com/resources/documents/TC1.PDF
    You can also check out the Apple support link and view the query.
    http://www.Apple.com/support/QuickTime/

  • My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

    Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

    Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

    data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

    for the data. Also, perhaps the home page of IP camera offers software/drivers.

  • How can I create a profile of the camera with camera raw?

    Hello

    How can I create a profile of the camera with camera raw without x-rite or any other third party software?

    I have a color checker, with a different shade of colors gray and different

    I remember on a script or something like that

    I have a lot of google, but without luck

    can I create my camera raw profile using a corrector of color with photoshop acr?

    I don't know, but this should be the script http://Simon.Tindemans.EU/tools/AcrCalibrator , non ?

    but I don't know how to use it

    Is there a tutorial? Perhaps a video to create a profile with camera raw

    Thank you

    Greetings

    Hello, I think you are looking https://www.adobe.com/cfusion/entitlement/index.cfm?e=labs%5Fdngprofileeditor

    Here is a PDF from adobe on this subject: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/photoshop/pdfs/cs6/ DNGProfile_EditorDocumentation.pdf

    And an article: http://www.luminous-landscape.com/reviews/accessories/dng-profiles.shtml

  • Satellite L500/01U: How to stop the camera setting will appear on the desktop

    Whenever I start, there is a graph of type small coloumn with icons of the camera, with TOSHIBA on top.
    That's the picture/video, settings, effect, face recognition.
    How to stop what appears, as it's annoying the heck out of me, because it is covered permanently on my Web pages.
    I can remove it with a right click, but I can't say how to stop appearing on start up.

    Hello

    I agree with Akuma.
    To cancel the camera automatically load software, the simplest method is to disable in msconfig.
    In RUN, type msconfig. Go to the Startup tab and disable the camera software.

    That s it ;)

    Welcome them

  • How to synchronize the device with an analog input device?

    Is it possible to synchronize a device (e.g. Basler scA640-70fm, IEEE 1394 b or NI 1722 smart camera) with an input device analog (for example, NI PCI/USB-6225 or NI PCI/USB-6255)?   For example, it is important to a video image of match with a sample of data digitized by the A/D converter.   In particular, it is important to know when the first video image starts compared to samples of digital data.   If it is possible to synchronize the camera with the A/D device, then then how is it?

    Thank you

    Ian

    Hello Robert,.

    Thank you for reference and information.

    Ian

  • How to follow the port on my router ipstar

    How to follow the port on my router ipstar

    Nothing to do with Windows.

    (1) read the help/documentation that accompanies it.
    2) go to the ipstar website and look for information.

  • After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera.

    Original title: webcam

    On my laptop hp15r, it is built in hp truevision hd webcam. After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera. Can someone help me with this problem?

    I have a laptop HP Windows 7.

    Type truevision or webcam or similar in the top of the start menu search box > right-click on the result, then select > open file location.

    My webcam can be found > lecteurC > Program Files (86) > Cyberlink > YouCam

    If I type YouCam in the search box, click with the right button on Cyberlink YouCam, it takes me to YouCam.exe.  You can do a right click on the .exe file and choose desktop (shortcut) so that you can access it from there. Once the shortcut on the desktop you can right click it and choose the PIN to the start menu or PIN to the taskbar tasks.

  • How to access the camera in the Blackberry Playbook using Adobe Air SDK (in Flash builder Burrito)

    Hi all

    How to access the camera in the Blackberry Playbook using Adobe Air SDK (in Flash builder Burrito).

    Provide me with examples of coding please.

    Thanks in advance.

    With respect,

    Sampath

    Not possible yet. See http://docs.blackberry.com/en/developers/deliverables/21880/Known_issues_1360895_11.jsp

  • How to use the camera application

    original title: using the camera application

    According to me, that there is a photo on Metro Screen App.  Is there a documentation or a tutorial on how to use it and what it is for?

    When I click it, I see three small icons in the bottom right...  Camera, Timer and video options.  I don't know what to do with them.

    I see me, looking me in the opposite direction, that seems odd.  I found a folder in my pictures, to my surprise, with pictures of me and two videos! I think that pictures should occur when I click on the screen, but I have no idea how I created a video or how to do it again.

    This looks like a fun app but I need help to use.  I couldn't find anything in the help files.

    Any help would be greatly appreciated.

    MaryLou

    Note: I probably don't not select the category of app so if not, please move this where it needs to go.

    Dena, regardless on the computer because it is an external Kodak camera.  I know how to use the camera itself, but the camera application that appears on the screen of metro is NOT just easy to use.  It shows 3 small icons, one is a timer, the other is for the videos and I forgot what the other one was for.

    In any case, I finally thought to it.  To use the camera, you click on it, then you must click on the screen to start the camera going.   I'm not sure that the timer is for, but again, once you click on the timer icon, you click on the screen to start the timer.

    My camera screen is not screen mode have won 8 metro.  The camera works fine via desktop applications.  I have it working in the version of Win 8 of Skype as well.

    I like to win 8 but it is so lacking in the documentation that it is difficult to learn to use the new ways of doing.

    Thanks for the reply but as I said... has been resolved.

  • How to fill the canvas with lines

    < mx:Canvas id = "b1" x = "10" y = "10" height = "40" width = "300" borderStyle = "solid" borderColor = "black" / >

    When I want to draw lines with difference of 15 pixels to fill the entire canvas I wrote the following

    for (var i: int = b1.x + 15; i < b1.x + b1.width; i = i + 15)
    {
    var line1:UIComponent = new UIComponent();
    var lineThickness1:Number = 1;
    var lineColor1:Number = 0 x 000000;
    var lineAlpha1:Number = 1;
    LINE1. Graphics.LineStyle (lineThickness1, lineColor1, lineAlpha1);
    LINE1. Graphics.MoveTo (i, B1.y);
    LINE1. Graphics.LineTo (i, B1.y + B1. Height);
    this.addChild (line1);
    }

    It works very well

    LLY,

    < mx:Canvas id = "b4" x = "600" y = "200" height = "60" width = "300" borderStyle = "solid" borderColor = rotation "black" = "40" / >

    I have the canvas above with the "b4" id only difference is that this canvas rotation

    How to fill the canvas with lines that I just did above?

    Hope this code will help you,

    for(var i: int = 15; i < b4.width; i = i + 15) {
     var line1: UIComponent = new UIComponent();
     var lineThickness1: Number = 1;
     var lineColor1: Number = 0x000000;
     var lineAlpha1: Number = 1;
     line1.graphics.lineStyle(lineThickness1, lineColor1, lineAlpha1);
     line1.graphics.moveTo(i, 0);
     line1.graphics.lineTo(i, b4.height - 1);
     //Add line in canvas instead of main container
     b4.addChild(line1);
}

  • How to play the song with .wma extension

    How to play the song with .wma extension

    If it does not DRM, use VLC. If so, no Mac OS X software can play or convert.

    (142864)

  • How to disable the camera led on my Satellite R830?

    Hi all

    Can someone please explain to me how to disable the camera led on a laptop Toshiba Satellite R830?
    Thank you for your help.

    AFAIK camera LED cannot be turned off. Web camera by activating the LED is always on.

  • How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

    Hello

    Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
    OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

    Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

    grateful for the help!

    Hello

    > message: unable to load powrprof, object: CLSD-no-it is found;
    In my view, this would mean that there is a problem with Toshiba Power Saver
    What laptop Toshiba, you have exactly?

    Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

Maybe you are looking for