How to frame with audio stage?

Similar Questions

• rub with audio?

  I have a 2 minute audio, and I want to rub the frames of animation around the 1 minute point, to see how they coordinate with audio, is it possible?

  If your sound is attached to an image and its synchronization is assigned the workflow, it is.

• How to send an audio message, but not with imessage?

  How to send an audio message, but not with imessage?

  Find another app/service that will allow you to do. Or record a voice memo using the voice recorder application and attach to an SMS.

• How can I get audio through my tv while watching a video with media Center

  so I attached the cord VGA from PC on TV and I get the photo and videos perfect buti only get audio from my laptop. How can I get audio through my TV?

  If it is a VGA connector, which normally has a blue with 15 pins/holes while the connection method has no audio embedded in the head. You will need to use a separate audio connection.

  Most TVs have a 3.5 small mm, sometimes with a green ring, to power the audio on the TV when you use this entry. If so, you need to connect the headphones taken computer to the TV with a 3.5 mm 3.5 mm cord.

  Only some DVI and HDMI ports incorporate audio and even then it depends on the specific material to do so.

• Its mixed? While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds will play together. How to avoid what is happening?

  While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds play together, which is not a good customer experience.

  How to avoid what is happening? Placing a marker can help, but cannot solve the problem when the compliant/no intentional user, press tab.

  
  

  Better, if the presenter can triggle tab automatically at some point, or click interaction, no game bar function.

  Hi Louie,

  My sincere apologies for not being able to help on your previous question.

  Now, that the Interactions are concerned, they were initially designed to be placed as standalone content on the slide.

  Also if you try to resize your interaction and place it on the slide as well as other content/objects released published will always give a priority to the Interaction that it deemed to be a specific slide of Interaction.

  In the previous project, you shared, you try to time the Interaction with PowerPoint animations and wanted it to appear later on the set of slides, rather than on the start. But, as explained above, presenter honored not this setting in your project, because he in fact has considered a slide of interaction and display interaction since the beginning of the slide room itself.

  Also the number listed in this thread is concerned, there is no direct way to do it but I would like to suggest something that might help.

  If you want to keep the interaction on your slide and other content, Interaction will be available at the beginning of the slide. Surely there is no way that delaying his appearance, but you can still use animation related to Interaction in another goal. Within your presentation-> playback option settings, you can enable the feature of 'Pause after each animation' (see screenshot below). It will essentially help you achieve the function of auto-faisant a break from your animations, using your narration would automatically stop, just before you claim in your narrative and inform the learner to click on the different tabs of the Interaction. All you have to do is your narration and animation correctly so that the slide play does not break too many times in the time interval. Hope you find the idea of what I'm trying to say.

  

  Please mark this answer as being correct, if you find it useful. We would certainly look at such scenarios to be achievable directly at the request of our updates and later version.

  Thank you

  Zeeshan Hussain

  Adobe Presenter Engineering Team

• How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene?

  How I continuously loop frames with pause for 20 seconds in each image of the scene even without going to the next scene? There are buttons for other scenes in these images. The below works well until I got to the last frame of the scene, then he goes to the next scene and plays. How can I make one loop continuously.

  Stop();

  var: timer = new Timer (20000,0); / / <--

  timer.addEventListener (TimerEvent.TIMER, timerHandler);

  Timer.Start ();

  function timerHandler(event:TimerEvent):void {}

  this.nextFrame ();

  or if you want to jump for example 5 executives

  this.gotoAndStop(this.currentFrame+5);

  }

  Thanks for any help.

  If you want to stop your timer, use the stop() method:

  Timer.Stop ();

  PS when you use the adobe forums, please check the useful/correct, if there is.

• How can I watch with audio multicam?

  Is a nested sequence, transformed in multicam, but when I look from all angles at the same time in the source monitor, there is no audio. How to activate audio tracks? I tried turning them into 'market' on the timeline, in selecting them, grouping, their nesting, playing with audio levels, what should I do?

  As I said, do you it in the program monitor.  Click on the below key and set mode multicamera.

• How I can read model of the position of the playhead with audio?

  If I hit the SPACEBAR model will play without audio. If I type Cmd + 'Keyboard-0', I get wth audio playback but starts playing from the beginning of the work area. How can I get audio playback without having to move the area of work/out markers?

  AE CS 6.1.x OS X 8 MB of RAM

  Check the "Preview" Panel There is an option "from the present time"...

  Mylenium

• How can I record audio now?

  Before the update my graphics to a (Radeon 4650) hdmi connection I could record audio. After installing the new graphics card, I had a conflict with the graphics card and my sound card.  A very loud snoring through the TV speakers. I use a 42 inch LG tv as a monitor. I get sound on the tv speakers. Because the hdmi connection supports the audio I removed my sound card. Now I can't record audio. How can I record audio now? Need me a sound card to support the recording with a microphone? When I choose the tape recorder, located in the Accessories menu, I get a message that "a recording device is not found.  Thanks a lot for the answers!

  I went a little less than a year with my card its removed from my machine.               I have re-installed the sound card, after I posted the message above. Then, I chose my hdmi graphics card as my default. At this stage no buzzing high strong ground. So far, everything works fine. Thank you for your response.

• 5102na HP OMEN: how to disable the audio correction Bang &amp; Olufsen horrible?

  Is there someone who could tell me please how to disable the audio correction Bang & Olufsen? I'm sure that some people like it but I work with audio and I can't really how it changes the sound. I tried to open the Bang & Olufsen sign but I cannot unselect the correction in the section "listening experience", nor that I can change the associated equalization. Please someone help, thanks!

  I found a solution: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-Audio-compression-and-volume-fluctuation-HP-ENVY-m6/m-p/5137867/highlight/true#M67144

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio. This is the device driver for BeatsAudio (a bit sneaky, wouldn't you say?).
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with the high definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes.
  12. Now enjoy your music with no compression!

  Thanks to SteveCT99

  This does not disable audio-Bang & Olufsen, but I just installed this EQ across the system instead: http://sourceforge.net/projects/equalizerapo/

  HP needs to release a driver which allow us access to the "Improvements" tab so we can turn off "Loudness equalization" (although "Loudness equalization" should not be on by default in the first place).

  The current driver is default.

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• Satellite L655-1FO - how to install the audio driver?

  How to install the audio driver on my l655 1fo? I download the driver of toshiba, but it cannot start. Can someone help me how to install it on Windows XP. Thank you

  Hey,.

  Before starting with the installation of the driver it is important that you install Service Pack 3 for Windows XP, because it contains important updates for cards high definition sound. Otherwise, you are not able to install audio driver.

  Download & install SP3 and then you can start with the driver installation :)

• How to frame a sketch I place in iPhoto?

  How to frame a sketch that I placed in iPhoto?

  My operating system is OSX 10.9.5.   iPhoto 9.5.1 (902.17)

  New versions of iPhoto have no frames. You can only use the vignette or matte effect from the control panel.

  But you could install the BorderFX plug-in.  It supports several styles of borders and frames, and you can also add captions with metadata, such as title, date, author rights.

  To install the plug-in BorderFX, see: BorderFX - iPhoto iBorderFX

  

• How to frame a word or phrase in the pages

  How to frame or a word or phrase in the box pages

  You can put a border around a point, but not a Word.

  To do this instead, you will need to use you above a rectangular shape with no fill, stroke and no Textwrap.

  Peter

• How can I call a stage, which is in a sous-suite, of a different sous-suite

  Hi, could someone me, please?

  How can I call a stage, which is in a sous-suite, of a different sous-suite.

  For example:

  Two sub sequence, is called, it is called B. In the order B, there is a step called BStep.

  In a sequence, there is a stage called AStep.

  Now, I Hope AStep can I call BStep, how can I do?

  Thank you in advance!

  Allan,

  What you're asking to do is not a practice of good software.  That's like saying you want to call a single line of code into a DLL.

  The best way to do what you want is to put the steps in a 3rd sous-suite.  Then set the subsequence with the parameters of the step.  Then call this subsequence of a sequence and the sequence B 3rd.

  This way, whenever you update the stage, they both get changes.

  Hope this helps,