LCD of Satellite A2450 stops working after two years

Similar Questions

• LifeCam has suddenly stopped working after many years

  Original title: problem with my Microsoft Lifecam VX-6000

  Problem with my Microsoft LifeCam VX-6000.  I used my LifeCam several times when using Skype, but now it will not work.  I examined a large number of questions and answers that are listed in the support forum but nothing I found fixes my problem.  I am running Vista Home Premium on my HP #SR5050NX PC with a 32-bit operating system.  I used this webcam for many years without any problems, but now it will not work.  I reinstalled the current drivers on the Microsoft site and it appears in Device Manager that the drivers are correct for the LifeCam VX-6000 webcam.  When I try to open Microsoft LifeCam it locates my camera and the green light comes on but no picture.  When using Skype, he finds the camera LifeCam 6000 but gives me a message that it cannot use this device because it might already be in use by another application, but no other application works.  I have also a Cisco Webcam that I have in the past to select which camera I wanted to use while Skyping but he stopped working at the same time my LifeCam 6000 ceased.  I get the same message... This webcam cannot be used because it might already be in use.  The drivers are correct on this camera as well.  What can I do to fix this?

  Thanks, I appreciate your help and your support!

  datgrt

  Hello

  I suggest you to return these items and check if it helps:

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

• Time Capsule and modem stop working after two hours

  Hello

  -A received the solid green light on Time Capsule.

  -All of the lights work on my modem Netgear CM500.

  -Ethernet cable firmly in place.

  -Power up, the two units of work perfectly and operate normally.

  -After about 2 hours, the internet connection is lost.  All lights are still entirely green on both units.

  -Disconnect the two units, wait 5 minutes, and then turning on again.  The use of the Internet is restored.

  -After about 2 hours, the internet connection is lost again.

  Cox on said guy here, everything went well at their end.  I think that something is wrong with my configuration of the airport because I put up on an iMac obsolete.  If this is the case, I would like to start everything from scratch, unless I don't have to (?)  My new iMac is here.

  Thanks in advance,

  -Chris

  It is a problem with the TC model AC. We do not know the cause, but he just has problems with a number of different cable modems. (others are also affected, but cable seems the problem of principle).

  What is happening is the WAN constantly talk to the modem port.

  There is nothing you can do... neither is defective... they are simply not happy punks when together.

  The solution is to replace one or the other...

  Around here people seem to think to replace the modem a better idea... the zoom model seems to be working... but check with Cox is in their list of supported modems.

  Zoom modem.

  https://discussions.Apple.com/thread/7360161

  https://discussions.Apple.com/thread/7427491

  IMHO, it is best to replace the router function of the TC... Thus, a good router market as (v2) TP-Link WR1043ND<$50 on="" amazon)="" and="" flash="" to="" gargoyle="" firmware.="" this="" includes="" loads="" of="" great="" functionality.="" the="" tc="" then="" bridged="" to="" this="" unit="" for="" wireless="" and="">

  Or the other method will help you to a better place.

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Satellite C70D-B-307 - brightness keys stopped working after migration Windows 10

  The brightness keys have stopped working after migration Windows 8.1 to Windows 10 (Satellite C70D-B-307).

  How did solve you this?

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Satellite L350 - pad stopped working after BIOS update

  Hello

  The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).

  Any ideas?

  Concerning

  The value of the default BIOS and test it again.
  NUMLOCK button works (LED on / off)?

• Re: Satellite A80-135 - during recovery, that it stops working after 10 minutes

  After trying to reinstall Windows from original restore DVD my A80 stop working after 10 minutes of this.

  I tried again several times and the problem is the same. Cannot complete the installation, because is shut down every time after 10 minutes or more.

  Do you have any ideea why this phenomenon happens?
  Thank you!

  Hello

  You should check if the same issue occurs with another disc maybe you could try to reinstall the OS by using the original CD of Microsoft Windows.

  If installation still decomposes at the same point and time then this could be related to a recovery disk scratched.
  On the other hand the laptop could shuts down due to hardware problem.
  As mentioned by Luke, the internal HARD disk bad might work too.

  Overheating could be another reason why the laptop is off.
  Maybe don t cooling modules work as it should and puts it in internal temperature high power off the laptop.

  But these are that some suggestions so it would be really interesting to know if you can reinstall the OS using another disc

• ScrollBar NB100 touchpad stops working after exit full-screen mode youtube

  I have some Toshiba laptops, satellite and now netbook100.

  All share a problem, the touchpad scroll bar:
  It stops working after you exit the full screen in youtube.
  Here's how to reproduce the incident:

  1. with the help of any mainstream browser, start playing a video on youtube, click on the button at the bottom right of the video full screen.
  2. click on [the cross] to exit full-screen. (next to button full screen.)
  3. check if you bar scroll that still work.
  4. a reboot will restore function.

  Currently I m on vista, I think that you will have the same problem under XP.
  The search in google (scroll touchpad bar stops full screen youtube) return more people will share the same question but no answer.

  Environments: win xp all, win vista all.
  All decks, Windows Update driver, updated touchpad driver.

  This is not a major technical problem, but for a netbook, it's very annoying.
  If anyone has this problem or answers, please share it here.

  Thank you in advance.
  Kind regards.

  To be honest, it's the first time I read on this issue.
  I m not a NB100 owner but I have a laptop and I m using IE as your browser and Windows XP.
  I checked this and my touchpad is not working correctly!

  I m wondering if this behavior would appear only the website youtube?  :|

• Predator G3120 stops working after one hour (exactly)

  Acer Predator G3120

  Windows 7 (64-bit)

  State of origin

  Stops working after one hour (very reproducible)

  Hello peoples,

  For more than two years now, I have an Acer Predator G3120 and I experienced a lot of pleasure from it. Three months or so, however, I can't keep the pc for more than an hour later. If I have all the programs running at the time where he spent an hour limit, my pc crashes and gives me a BSOD (mainly stopcode 0x000000f4). If I don't have any programs running, it will be impossible to open all my desktop shortcuts, and if I try to go to 'My Computer', explorer.exe stops working. ALT + ctrl + del will result in a black screen. I'm quite a greenie when it comes to things like these, but I am I supposed to do something with my SSD.

  Download the latest drivers did not work, however. Also, I'm sure that this doesn't have to do with malware, as I couldn't detect any with different scanners, and I put my pc back to factory settings (which makes it quite certain, that he doesn't have to do with any installed programs).

  At this point, I'm running out of options, and so any help would be most welcome.

  Thank you for reading,

  Skumawiki

  Once connected to your system, your position SSD is not serious.

  Try this:

  http://www.crucial.com/wcsstore/CrucialSAS/firmware/M4/070H/1-0-0-90-crucial-070h-07-00-SSD-firmware...

• All-in-One L7550: all-in-One printer L7550 stop working after a Win 10 update

  In the last two days my printer has stopped working after many updates to Win 10.  Functions in fact any printing has stopped (swirling points) to include my PDF SW.  I downloaded the last SW all-in-One and tried to install it.  The first thing that happened is that he tried to remove the previous SW.  Hooked to halfway through it.  Then, it was a nightmare.  I can't get the rest of the SW uninstalled nor can I install the latest SW.  I even tried to install the previous SW in Win 7 compatibility, but after extraction it just stops.  Tried to install the current version in Win 8 conpatibility, but it also wrong on.

  Any ideas wher can I start?

  Welcome to the Forums of HP, @CharlieCC,.

  I hope to help you with installation and uninstallation issues you are having with your Officejet L7550 on Windows 10. Before you get any software troubleshooting, try to make a copy of the front of the printer. If copies work fine, continue with the steps below to work on the issues of software!

  Step 1: perform a level 3 Uninstall to remove completely all the files to your system printer.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop: all-in-one printer, HP Officejet Pro L7550
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe (or .bat).
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• My CD/DVGW device stop working after iTunes was installed with Apple records.

  My CD/DVGW stop working after you install the program iTunes with Apple records. The letter (e) are attributed to him does not appear in computer (Windows Vista Home Premium), as it was before. Every time the PC is switched on or reboot, a message from Apple saying "AppleSyncNotifier.exe point of entry is not found. The procedure entry point sqlite3_prepare_v2 could not be found in the dynamic library SQLite3.dll. "The HP device proves that this CDROM works. iTunes has been removed, but the apple files are still there. Driver Detective advised to remove the filters from the registry. Only the filters 'less' appeared and has been deleted. This does not solve the problem. Should I delete all Apple records that have been installed with iTunes? This will damage other programs?  Reinstall the driver for this device does not resolve the problem.  !  yellow sign keeps appearing in the parity for this device handler. Systen restore does not a remote date just to put it as he was back. Can someone help, please?

  Hello

  Having too many competing programs from loading at startup CD/DVD can cause these problems.

  Deleted? Or did you correctly uninstall iTunes? Check with iTunes support for complete hair removal methods.

  ---------------------------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• laptop keyboard stopped working after Windows update.

  have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.

  As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.

  It suits it much of the time.

• Keyboard and mouse either fail to start or stops working after a while.

  Original title: keyboard and mouse problem

  My keyboard and mouse either do not work at startup, stop working after awhile, sometimes after a few hours or sometimers causing me to push the button Reset to get out every 10 minutes is on the line of support from microsoft for two hours, cost me £65, but still not fixed

  Pentium I5 dual core 2 x 500 GB disks 5700 chart logitec gaming mouse and keyboard

  Hello

  Thanks for those tips, I've considered that everything that had happened in the last weeks and remembered that my mouse was the first to show signs of problems when the red light on the bottom went dark and brilliant then a few times.

  I swapped the front mouse with a type Wireless and it seems not however solve the problem since replacing it with a different mouse to lead the problem disappeared. In my view, that the old mouse has a hardware problem that shorted supplies USB causing both mouse and keyboard stop working.

  allowed for a few days, so I guess that was the problem.

  Thank you for your support

  Chris