How to free the memory through BlackBerry Webworks Code

Similar Questions

• How to free the memory consumed by the Essvr.exe

  Hello
  Whenever we start a request will start a process called ESSVR.exe in the background and his memory, consumption will increase as and when we run the calculations. But after the calculation is performed should not reduce the memory consumption.
  Whats happening is that sometimes the calculation gets hanged and when I kill the process and start it again, it is run after a couple of times the calculation again gets hung, is possible to free this memory consumed by the process through calc only, script commands so that every time when a calc script finish the memory is released. We use essbase 9.3.1.

  When an application is started, the first thing it does is enter memory equal to what is defined as the key cache. This memory is never released until the application is stopped. He leaves also consumes memory for the data cache as she needs until he reached what is defined for this cache. Yet once that memory is not released until the termination of the application. In addition, additional memory can be consumed for different things while the demand is increasing. For example dynamic cache calculator will use memory during the execution of a calc, each user to make recovery uses a little memory (which can add up with many users). ASO data load buffers use memory, kinds of report and recoveries, etc., you get the picture. All these resources are released when the application terminates. (or should be, there have been cases of memory leak in some versions)

• Accumulation of memory in InDesign: how to free the memory?

  Hey guys,.

  I'm fairly new to InDesign extendscript and quickly ran into a problem that I can't solve everyday.

  I'm working on a flash (version with adobe extension builder) Panel which, among other things, automatically the thumbnails page on exports, adds some data and so on... during treatment of pages (true magazine with a lot of content), the memory raises up to 1.5 GB and InDesign crashes. When I try less grave InDesign pages not down, even after the completed export script, InDesign uses still some 1 GB of memory.

  To get initially page thumbnails, I use the built-in function Document.fileExport (Menu-> export (JPEG)).

  I absolutely do not understand the tricky part is, if I call with window options (Document.fileExport: showingOptions = true), the memory instantly drops about 10 MB. So I 'bypassed' this problem by exporting pages in bursts (10 pages at the time) and indicating the options for the export of 10 pages. This way memory relies for 10 pages, then descends and accumulates again. But never up to 1.5 GB of crash InDesign.

  As you can guess, this workaround is real pain in the anus, because export is automated is no longer and need operator / monkey push-button every 5 minutes or up to prevent InDesign crashing. (reminds me of the TV series LOST )

  I tried to call $. gc(), but absolutely nothing happened. Even when I created the button dedicated with single purpose: call $. gc() and kept pushing for 10 minutes after export was over - nothing happened, the memory was still upstairs.

  I just reopen the old project (abandoned due to the accumulation of memory) and was really surprised that he was suddenly works fine. I did a little googling and discovered that there was an update of InDesign in August 2010 that included graphics export patches.

  So, if anyone google this thread, it is more relevant if you update IDS 2010/10.

  Way to go Adobe!

  Thank you, Peter

• How to free the memory after the end VI

  The data is collected once in a loop and added to a table of data. The collection was completed after the loop ends and a data table was built. In the end, the data has been written to a file. The program ended naturally. I guess that all the variables are erased from memory after the end, but it wasn't. If I run the program twice without closing, I have a set of newly collected data added to the 'old', which was created in my last run. A third series has been added if I run it once more.

  I just want to keep the last function as my data and I don't want to close the program to set all my settings to similar races. How to do?

  A sample file is attached.

  Thank you.

  You need to wire a constant empty table to the Terminal (lower bound) of the feedback node initializer.

• How to upgrade the application through Blackberry Desktop

  Hello.

  Situation of Stange. Could you please give me a hint, how do I overcome that?

  1. I've compiled and signed the application. Alx file created. Two files are created "bb_application.cod" and "bb_application.alx".
  2. I run Blackberry Desktop, ran the Application Loader and specified my project as the location of the files folder and installed the application.
  3. I decided to change something in my application. I changed the code java, recompiled and signed the application. And also alx-file created.
  4. I run Blackberry Desktop, ran the Application Loader and saw that my request is already shown in the window of the Application Loader that checked. When I clicked on the button "Add" and specified the location of the updated alx file I get the following error: "no additional applications designed for your device were found".

  How can question - I change application already installed without uninstalling? If I uninstall this application - all the information stored in the store persistent will be lost.

  Here is my point of view on what is happening here.

  You have added an alx for the application loader, so that he knows that cods you attempt to load on the device.  If you add an another alx with the same cod, he rejects this, by you saying "no additional demand.  In this case, it should probably say "cod application already added.

  Now the application loader is sometimes his own worst enemy, but he tries to be smart and it will remember, for every alx you added, the level of the alx.  So if you change that alx to a level later, the application loader will tell you, that you need to update.  If change you to a previous level (i.e. lower) it will tell you are without downgrading and then ignore the downgrade (which can be a bit annoying...).  Doing so, in my experience, it takes without notice of the date of compilation of the cod file - this only on the level in the alx details.

  So in your case, you simply update the alx that points to the application loader whenever you put cod involved level (and sign)...

• How can I free the memory?

  I tried set 'NULL', but I can't free memory.

  How to free up memory after ' FileReference.addEventListener (Event.COMPLETE,...) '?

  See my code:

  hand. ACE

  package {}

  import com.mainpackage.LoaderTestCase;

  import flash.net.FileReferenceList;

  import flash.net.FileReference;

  import flash.net.FileFilter;

  import flash.events.MouseEvent;

  import flash.events.Event;

  import flash.display.MovieClip;

  main/public class extends MovieClip {}

  private var listFiles:Array;

  private var allTypes:Array;

  private var fileRef:FileReferenceList;

  public void main()

  {

  listFiles = [];

  allTypes = [];

  fileRef = new FileReferenceList();

  fileRef.addEventListener (Event.SELECT, SELECT);

  fileRef.browse (allTypes);

  }

  private void SELECT(e:Event):void

  {

  Table: list var = fileRef.fileList;

  var file:FileReference;

  for each {(file in the list)

  Insert (file);

  }

  }

  private void insert (file:FileReference): void

  {

  var fire: LoaderTestCase = new LoaderTestCase (leader);

  Fire.Destroy (function (): void {})

  fire = null;

  });

  }

  }

  }

  LoaderTestCase.as

  package com.mainpackage

  {

  import flash.net.FileReference;

  import flash.events.Event;

  import flash.display.Loader;

  public class LoaderTestCase

  {

  private var file:FileReference;

  private var loader: Loader;

  private var: callback function;

  public void LoaderTestCase(e:FileReference)

  {

  file = e;

  trace ("OPEN:" + file.name);

  file.addEventListener (Event.COMPLETE, loadFile);

  leader. Load();

  e = null;

  }

  public void loadFile(e:Event):void

  {

  file.removeEventListener (Event.COMPLETE, loadFile);

  trace ("LOAD:" + file.name);

  file = null;

  e = null;

  callback();

  }

  public void destroy(a:Function):void

  {

  reminder = a;

  }

  }

  }

  Amy, I reached my goal, see the results:

  1. Firefox/Safari (Flash plugin version 12.0.0.77): Insider with 9 MB, 135 MB back and trimmed to 17 MB.
  2. Google Chrome (PepperFlash version 12.0.0.70): initiated with 12 MB, goes up to 132 MB and trimmed to 17 MB.
  3. Flash Player (Adobe CS5/Release/FlashPlayer.exe version 10-12 without running CS5): initiated with 6 MB, 185Mb back and filled with 185Mb.

  I realized something, with FileReferenceList.fileList if I so FileReferenceList.fileList [5] = null; (when the "sixth" file no longer serves) Flash memory immediately release this specific FileReference.

  Has worked on all the desktop computer / Plugins / PepperFlash.

  package {
       import flash.net.FileReferenceList;
       import flash.net.FileReference;
       import flash.net.FileFilter;
       import flash.events.MouseEvent;
       import flash.events.Event;
       import flash.display.Sprite;
       import flash.display.Loader;
       import flash.display.Bitmap;
       import flash.display.BitmapData;
       import      flash.geom.Matrix;
  
       public class Main extends Sprite
       {
            private var listFiles:Array;
            private var allTypes:Array;
            private var fileRef:FileReferenceList;
            private var tmpFile:FileReference;
            private var i:uint=0;
            private var j:uint=0;
            private var timer:uint;
            private var imageTypes:FileFilter;
            private var enable:Boolean;
            private var imageLoader:Loader;
  
            public function Main()
            {
                 imageTypes      = new FileFilter(
                      "Images (*.JPG;*.JPEG;*.JPE;)", "*.jpg; *.jpeg; *.jpe;"
                 );
                 listFiles     = [];
                 allTypes     = [imageTypes];
  
                 eventBrowse(true);
            }
  
            private function eventBrowse(a:Boolean):void
            {
                 enable = a;
                 if(a===true) {
                      stage.addEventListener(MouseEvent.CLICK, browse);
  
                      fileRef = new FileReferenceList();
                      fileRef.addEventListener(Event.SELECT, select);
                 } else {
                      fileRef.removeEventListener(Event.SELECT, select);
                      fileRef = null;
  
                      stage.removeEventListener(MouseEvent.CLICK, browse);
                 }
            }
  
            private function browse(e:MouseEvent):void
            {
                 if(enable===true) {
                      fileRef.browse(allTypes);
                 }
            }
  
            private function select(e:Event):void
            {
                 listFiles = fileRef.fileList;
  
                 eventBrowse(false);
  
                 i=0;
                 j=listFiles.length;
  
                 if(j>0) {
                      loadNextFile();
                 }
            }
  
            private function loadNextFile():void
            {
                 if(!(i
  

• How to enable the memory full use in Win 7 Pro 64 Bit OS

  Hello.

  I have a desktop with Win 7 Pro 64 bit and its installed with 8Gigs of RAM above, but when I check in the properties of the computer it shows only 8 GM installed and 3.86 inuse.

  Can anyone suggest me how to get the memory of 8 GB in use. ?

  Concerning

  Ishaan

  Why do you need to use all of your RAM?

  Are you trying to find how to use "RAMDisk"? The link below is for one of the
  software available. A search can find a free version.

  http://memory.Dataram.com/products-and-services/software/ramdisk

  The first I've heard talk of RAMDisk was today in the thread below.

  "You not use RAMDisk?
  .

• How to reduce the memory usage when loading bitmaps from the library?

  When I use BitmapData.loadBitmap () to load an image in the library, then attachBitmap() to add it to a MovieClip it takes a lot more memory instead of just to have the same image inside a MovieClip statically in a frame in the timeline.

  The dispose() function not only deletes the BitmapData object but also destroys the bitmap previously attached inside the MovieClip, so it cannot be used to free the memory.

  Is - this how it is supposed to be or there at - it another way to dynamically attach bitmaps with comparable rightly memory use have them on stage?

  You can do the same thing with movieclips: create a bitmapdata instance and use the draw() method to overlay as needed.

• Portege Z930 - how to clear the memory of the fingerprint sensor?

  Hello

  Tell me how to clear the memory of the fingerprint sensor?
  Reinstall the operating system and now I can not add your impressions.

  They have their No....

  > Reinstall the operating system and now I can not add your impressions.
  Stand by. You have reinstalled OS using original recovery image?

• Photosmart 7520: How to erase the memory of my 7520 HP printer all in one?

  How to erase the memory of my 7520 HP printer all in one?

  I try to delete all personal data before recycling.  I also want to remove the password of wireless network that seems to be in memory?

  From the front panel access home, installation, tools, Reset Factory Defaults.  Also make sure that camera cards are removed from the slots on the front panel.

• Satellite Pro L50 - a: how to replace the memory, HARD drive and battery

  I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro

  The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).

  http://www.YouTube.com/watch?v=IG0lW7t92bI

  BTW why they made it so difficult to get just to the battery in this model?

  WARNING - proceed at your own risk and don't forget static precautions!

  Hope they help and if you have any questions let me know.

  + The message was edited: link has been removed ad channel may not +.

  Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
  Be careful about this.

• Tecra R10 - how to remove the memory module?

  Hello!

  How to remove the memory module?

  Get the following message and for me, it means that one of the modules is broken:

  Out of memory error
  Address = H 00034000
  Read Date = H 28034000
  Write data = H 00034000

  For my opinion, the computer should start up again when I remove the memory broken slice?

  The Australia has soon

  Hello

  You can easily remove the memory modules.
  I think that the Bay is placed at the bottom of the unit.
  Remove the screw that is blocking the Bay, and you will have access to the module.

  Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=81

  I hope this helps a little

• free the memory of the queue after ingesting large paintings on the RT/cRIO

  I'm working on an application, running on a cRIO, which receives files from the network (up to about 7 MB per file) and transfers data to the FPGA that writes to synchronized with an external signal. The files are never written to disk of cRIO, they are streamed directly from memory on a DMA channel. I can receive files faster I have save output digital, so I put the incoming files in a queue. Each file is simply a large array of bytes, and the queue contains arrays of bytes. Whenever I finished it passing an array to output digital, I remove the following.

  My problem is that, in certain situations, I get files enough to fill the cRIO memory, and that memory don't is released because the elements are removed. It is a normal behavior, according to other threads on this forum. However, I can't find a way to force to free this memory and in some cases, prevents me from download files more - I get error 2 ("memory") when I unflatten the TCP entering a table stream. I tried to add code that empty the enqueues empty tables, queue and then removes the empty bays, but apparently not to free the memory. Anyone have any ideas?

  It comes to LabVIEW 2012SP1, running on a cRIO-9076 with VxWorks like operating system.

  The only way I know to free up the memory of the queue is to destroy the queue.  But according to the architecture you, would not be possible.

• It will not play a video cd due to 'insufficient memory' I closed the programs on the taskbar - did not help! What can I do... or how to clear the memory?

  I am running Win 7 on my emachine, and this is the first time, he will not play a video cd due to 'insufficient memory' I closed the programs on the taskbar - did not help!  What can I do... or how to clear the memory?  anyone?

  Hi Ernie,.

  First, you use any type of applications to run your videos?

  Also check links theses below, you may find them useful. (Click on it)

  How to prevent out of memory problems

  A guide to increase the speed of your computer

  I hope this helps.

• How to specify the custom application BB10 WebWorks category

  How to specify the custom in BB10 WebWorks app category. If tried, but it seems that this does not work for me. What shoul I do it.

  Hello.

  I think the element of config.xml standard tag would be the rim: category, as in the example of documentation:

  but it seems not be supported yet for BB10. You can ask a question to the github repo, I think that the BB10 Packer must be at the right place.