How to freeze the camera animation

Similar Questions

• How to disable the camera led on my Satellite R830?

  Hi all

  Can someone please explain to me how to disable the camera led on a laptop Toshiba Satellite R830?
  Thank you for your help.

  AFAIK camera LED cannot be turned off. Web camera by activating the LED is always on.

• Satellite A200-AH7 - how to get the camera program?

  I installed Windows 7 today and now the Chicony Webcam does not work. I've updated the drivers and the software for the Toshiba for Windows 7 download site, but nothing happens when I click on camera assistant. I tried to run the compatibility program, and he tells me that the program is not compatible even tought that the software is for Windows 7.

  Any ideas on how to get the camera to run program?

  Thank you
  Gary

  Sorry my mistake, the camera assistant was hidden.
  Of work.

  Post edited by: gary blainville

  > Sorry my mistake, the camera assistant was hidden.
  > Work.
  This means that your webcam working properly now?

  If so it of great and thanks for your comments! :)

• How to turn the camera off when I get the picture?

  How to turn the camera off when I get the picture?

  How to turn the camera off when I get the photo I do my iphone 6 mute and when I get the picture give sound

  Some countries do not allow phones take pictures of silent.  iPhones sold in these countries do not allow the sound picture to shut up.

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.

• After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera.

  Original title: webcam

  On my laptop hp15r, it is built in hp truevision hd webcam. After the downsizing of the original software of windows 8 for windows 7 ultimate, I can't find how to access the camera. Can someone help me with this problem?

  I have a laptop HP Windows 7.

  Type truevision or webcam or similar in the top of the start menu search box > right-click on the result, then select > open file location.

  My webcam can be found > lecteurC > Program Files (86) > Cyberlink > YouCam

  If I type YouCam in the search box, click with the right button on Cyberlink YouCam, it takes me to YouCam.exe.  You can do a right click on the .exe file and choose desktop (shortcut) so that you can access it from there. Once the shortcut on the desktop you can right click it and choose the PIN to the start menu or PIN to the taskbar tasks.

• How to access the camera in the Blackberry Playbook using Adobe Air SDK (in Flash builder Burrito)

  Hi all

  How to access the camera in the Blackberry Playbook using Adobe Air SDK (in Flash builder Burrito).

  Provide me with examples of coding please.

  Thanks in advance.

  With respect,

  Sampath

  Not possible yet. See http://docs.blackberry.com/en/developers/deliverables/21880/Known_issues_1360895_11.jsp

• How to open the camera in the playbook

  Hello friends,

  Please help me out by telling how to open the camera in playbok by code...

  I need to open the camera, then click on a photo I want to display in my application

  Thank you.

  You must use the CameraUI class. See this link:

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/Media/CameraUI.html#launch (...)

  App playbook: Car accident 

• How to use the camera application

  original title: using the camera application

  According to me, that there is a photo on Metro Screen App.  Is there a documentation or a tutorial on how to use it and what it is for?

  When I click it, I see three small icons in the bottom right...  Camera, Timer and video options.  I don't know what to do with them.

  I see me, looking me in the opposite direction, that seems odd.  I found a folder in my pictures, to my surprise, with pictures of me and two videos! I think that pictures should occur when I click on the screen, but I have no idea how I created a video or how to do it again.

  This looks like a fun app but I need help to use.  I couldn't find anything in the help files.

  Any help would be greatly appreciated.

  MaryLou

  Note: I probably don't not select the category of app so if not, please move this where it needs to go.

  Dena, regardless on the computer because it is an external Kodak camera.  I know how to use the camera itself, but the camera application that appears on the screen of metro is NOT just easy to use.  It shows 3 small icons, one is a timer, the other is for the videos and I forgot what the other one was for.

  In any case, I finally thought to it.  To use the camera, you click on it, then you must click on the screen to start the camera going.   I'm not sure that the timer is for, but again, once you click on the timer icon, you click on the screen to start the timer.

  My camera screen is not screen mode have won 8 metro.  The camera works fine via desktop applications.  I have it working in the version of Win 8 of Skype as well.

  I like to win 8 but it is so lacking in the documentation that it is difficult to learn to use the new ways of doing.

  Thanks for the reply but as I said... has been resolved.

• How to rotate the camera? HP ENVY X 2 Convertible Notebook/Tablet PC

  OMG I'm beyond useless and hate this computer up to now.

  Is someone can you please tell me how you face the camera forwards to a webcam as Setup?

  Thanks heaps.

  I understand you want to switch between the front and rear cameras.

  This will depend in large part on what application you are using.  The default camera in Windows 8 app has a button to switch between the two cameras located at the bottom of the app.

  What program do you use?

• How to freeze the layers and block them so that they do not appear when you open the file?

  How to freeze the layers and block them so that they do not appear when you open the file?

  You can set the Initial State of the layers as hidden.

  The game, 18:09, kathya97643775, [email protected], 8 October 2015 >

• How to freeze the background

  Dear experts,
  
  How to freeze the background
  
  I have a single swf (1000 x 500) image with buttons everywhere. by clicking on the buttons will loadMovie in a movieclip of the same size as the scene (1000 x 500). Apparently the oringal swf is still active and will always react to mouse overs and presses. How can I freeze the background so that mouse events are ignored in the background and only covers the forground movieclip?
  
  
  How to scroll through a clip or content with photo and text
  
  I searched high and low, but it looks like my search terms are all in the wrong direction. I couldn't find a tutorial that said that. on the one hand, I use version 7.2.
  
  Basically, I want to have a page "team" that is loaded into the Movieclip as described above. now, I have to be able to scroll through the photos of the cast and crew and their description. Help Flash teaches only scrolling dynamic text. Can the rest, I do not understand... someone please?
  
  
  
  Best regards
  Jake

  Thanks for your two cents . I managed to overcome the "text overflow" using several static text fields. Indeed, if the method of masking was the way to go Yes?

  PS: Oops... this post is not the answer... will not make this mistake again... y at - it a way to stand out as a response?

• How to use the camera layer.

  Hello, I use Adobe AE CS4 in my 32-bit of Windows XP computer.             I downloaded a few youtube tutorial and followed very closely and I have a project to make what is 95% complete. I'm stuck at the tool camera layer, I want the camera to follow every word of the philosophy that I have inserted in the project. Could someone tell me how, I did with the background, light, text, now the last would be the camera layer. How can I achieve that. Any help is greatly welcomed. Thank you.

  Just set keyframes for the camera and move it. You can set the values in the timeline panel or use different views to adjust the position of the camera. Please search the help files in the animation of a camera. We cannot give you much better than advice without knowing what tutorial you follow.

• Send to compressor: how to choose the camera

  Hello

  I apologize if this is a really stupid question, I'm quite new to Motion 5.

  If I am not mistaken, with send to compressor, using the multi-passages option, and other compressor optimized parameters will result in the export of better quality, if this is true, it's the method that I would use for my final exports.  (If I'm wrong, please correct me and let me know which will give the best final ProRes 4444 60 fps 1080 p export - I then import them using FCPX and do a little cut etc, then exporting to h.264 final 60 fps 1080 p).

  Anyway, to my question, how choose them which camera I want to export?

  I choose 'Export using compressor settings,' and then I give myself the opportunity to choose which camera, but I no longer like the options of compressor, where I can choose to use multi-pass and all other settings.

  I tried selecting the camera that I want to export, and then "Send to compressor", but that does not work, it does not use the camera, I chose.  I have a total of eight cameras, so to choose which device I export is quite important for this odd project.

  The answer could be made obvious, once again, I apologize if this is a really stupid question.

  Thanks in advance for any thoughts.

  (Motion 5, compressor 4, El Capitan)

  If you use 'Export using compressor settings' this essentially load presets created in compressor without going into the application, so it has minimal options for adjustment.  What you want to do, you should be able to create a preset in compressor with the settings you need.  Then moving when you use "Compressor to help export settings" select your preset and in the Render tab, there is the section of 3D rendering, you can select the camera you want to copy.  By default, it should be 'Active Caméra', but you can select your other cameras as well.

• Satellite L500/01U: How to stop the camera setting will appear on the desktop

  Whenever I start, there is a graph of type small coloumn with icons of the camera, with TOSHIBA on top.
  That's the picture/video, settings, effect, face recognition.
  How to stop what appears, as it's annoying the heck out of me, because it is covered permanently on my Web pages.
  I can remove it with a right click, but I can't say how to stop appearing on start up.

  Hello

  I agree with Akuma.
  To cancel the camera automatically load software, the simplest method is to disable in msconfig.
  In RUN, type msconfig. Go to the Startup tab and disable the camera software.

  That s it ;)

  Welcome them