How to get 5V off NI USB 6501 from + 5 v source

Similar Questions

• Hello I am downloading from my site and my characters are messy. I type an e (taken glyphs-window), but what appears is an and the copyright sign? can someone tell me how I get rid off this

  Hello I am downloading from my site and my characters are messy. I type an e (taken glyphs-window), but what appears is an and the copyright sign? can someone tell me how I get rid off this?

  I tried a lot of things, but nothing seems to make a difference.

  In my view, they have already done for you...

  The site seems OK now. Hooray !

  But let's dig down to the serious things of this.

  If the browser needs a statement of character. Probably ' UTF-8 ', but another or an older one would be as well, as long as it's cheap, and it respects the method of characterization of the Web page.

  This statement can be provided by (1) the web server itself (its default value), (2) the htaccess file in your web root directory server, or (3) on each web page. Where there are several and contradictory statements perhaps, the older in the command above rules. But in the case where the Server and the htaccess do not provide a statement of character and your web page later on, it shouldn't be a problem.

  Your provider said that they do not have a such context in their web server, and it wasn't a htaccess file in your root folder (Muse is not create it for you). Once again: do not worry, it should always be no problem, because all your web pages provides the declaration as well (thanks to Muse). We have checked that, no doubt.

  That is where their claim is not accurate. BTW: many tips are on the Internet on the common practice in this area and they all advice that the htaccess is not the place more obvious to the declaration. The page is the best place to put it.

  W3C (the 'boss' of http and html)

  some general information:

  Choosing & applying a character encoding

  putting in a .htaccess file:

  Definition of charset in .htaccess information

  and finally, put on the page:

  Declaring character encodings in HTML

  But what is even more strange: I checked the web server of your provider to access this service online, and it seems that their server is to provide a framework (and it is UTF-8, fortunately). It's the opposite of what they have been say...

  Now I have the idea of some personal provider noticed this morning that their server wasn't working properly (maybe after a failure of server or another incident or failure), serving the pages with a wrong setting. Then maybe they quickly corrected, and not to let you know that, they tell you to put in place this htaccess file (which makes no difference, just as the declaration of your page also could not prevail in the setting of the server).

  So now, you are done with all the three statements: a parameter, a htaccess in your Web site folder and that of your server page. As long as they all say and expect the same (UTF-8) you don't have to worry about this.

  Problem solved, three times!

  PS: many accommodation providers (and I'm afraid that yours as well) tend to declaring that whatever they do is 'standard' and 'obvious'. While in many situations, it's always a little different and certainly not the standard, not to mention obvious...

• How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document?

  How to get around the problem of printing from the printer driver Adobe PDF for Notepad instead of a PDF Document? I tried the tool 'Repair Acrobat Installation' and other problems listed on the forums, but nothing worked. In the Notepad document is the following ' % [ProductName: distill] % X937B6DD4 not found, using the mail service.» X07BB154E not found, by using the messaging service. % [Page: 1] %% % [Page: 2] % % [Page: 3] % % [Page: 4] % % [Page: 5] % X4EEBB81F not found, by using the messaging service. %% [Error: invalidfont;] OffendingCommand: show; ErrorInfo: CharOffsets ss %% [Flushing: rest of work (end of file) will be ignored] %% %% [warning: PostScript error.] No PDF file produced. ] %%."

  The log file indicates that the Distiller cannot find fonts and besides, fonts with very weird names. (These names can often appear when printing from an application, WPF such as Internet Explorer 9, 10 or 11.)

  My best guess is that the problem is with the options set for the PostScript of PDF from Adobe printer driver instance. Exit the application you were initially impression since. Open the Adobe PDF printer Properties . Then click the Advanced tab. Then click on the button default printing . This should produce a significant window default print Adobe PDF is already opened in the Adobe PDF settings tab. On this tab, there is a checkbox to rely on system only fonts; do not use fonts in the document. If this box is checked, uncheck it and press apply , then OK. Then go to the general tab and press the button Preferences giving the window entitled Adobe PDF printing preferences. Again once, look for the box to rely on system only fonts; do not use document fonts. If this box is checked, uncheck it and press apply , then OK. Then back in the Adobe PDF Properties dialog box main, press apply (if it is enabled), and then click OK. Re-enter the app you were original print and try to print again. Let us know if that fixes the problem.

  -Dov

  PS: Unfortunately, rely on fonts system only turned on by default, causing problems for many applications. I always recommend turning it off (i.e., unchecking it)!

• When I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic) nothing happened.how can get video off camera and on the computer?

  (In the AutoPlay dialog box that appears when you turn on the DV camera, click importing video.)
  It's # 2 on how to import the video but when I pluged my camcorder (Sony trv608) in my emachine (I have windows Vista Home Basic), nothing is happening... How to get my video on my computer and my video cam?... I also got told by sony I needed to cap analog, so I have I need to download something on internet even thought I have Director on my windows? IM so confused?

  Hi harleykristi,

  Welcome to the Microsoft answers site!

  Looks like the video camera (Sony trv608) is not compatible with windows vista, see the Sony link below:

  http://eSupport.Sony.com/us/Perl/SWU-download.pl?upd_id=1452&MDL=CCDTRV608

  () Vista drivers are not available)

  You try to install the software that came with the device in windows XP service pack 2 compatibility mode. See the link below:

  Run the program compatibility Wizard

  1. open the program compatibility Wizard the by clicking the Start button, clicking Control Panel, click programs, and then clicking on use an older program with this version of Windows.

  2. follow the directions in the wizard.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  For more information, see the link below:

  http://eSupport.Sony.com/us/Perl/model-home.pl?MDL=CCDTRV608&loc=3

  You the best solution would be to check with Sony to learn more.

  http://eSupport.Sony.com/us/Perl/contact-land.pl?MDL=CCDTRV608

  Hope this information is helpful

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get the Windows 7 USB/DVD download tool to recognize a file bootsect on my XP 32 bit machine, if I bought Windows 7 64 bit?

  Title says it all. I scoured the internet for an answer.

  I bought Windows 7 Professional Upgrade with the discount for students. I downloaded the file .iso image 64 bit on my account "Downloads + product keys." I also downloaded Windows 7 USB/DVD download tool to make a USB bootable for Windows 7. I ran the utility and everything worked well, but at the end of step 4, I received the message "files copied successfully. However, we were able to run bootsect to make the USB drive bootable. If you need help bootsect... blah blah blah. »

  I went looking for answers and I found the troubleshooting for the show here: http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool#ms_help_topics_at0
  Next to Windows 7, step 3 says "is there an"additional download options"drop-down list."
  I had that day, but then this:
  Step 4: "in the drop-down menu, select"32-bit ISO." »
  This is not possible, because I bought the 64 bit version of Windows 7. All I see are the 64-bit .iso and .exe.
  I tried searching through Microsoft answers and found that many other people had this problem. I tried all of the suggestions for workarounds in this thread. http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/problem-using-Win7-usbdvd-download-tool-concerning/37eadf15-85DD-4e56-A89C-fa0a3339b92e
  The only solution I have tried was downloading the file bootsect from one source other than Microsoft.
  Is it seriously the only way to make it work? To download a BOOTSECT FILE from an UNTRUSTED SOURCE? Come on, Microsoft.

  If you purchased Windows 7 since the MS Store:

  When you create a bootable USB device, I get an error on bootsect
  To make the USB bootable, you must run a tool called bootsect.exe. In some cases, this tool must be downloaded from your Microsoft Store account. This can happen if you try to create a USB bootable 64-bit from 32-bit version of Windows. To download bootsect:

  1. Sign in to your Microsoft Store account to view your purchase history
  2. Search for your purchase of Windows 7.
  3. Next to Windows 7, there is a drop-down list "additional download options.
  4. In the drop-down menu, select "32-bit ISO."
  5. Right-click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).
  6. Once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

  If you didn't buy Windows 7 since the MS Store:

  Follow these instructions to work around the bootsect error:

  a. download and install the Windows 7 USB/DVD Download Tool program, as described on theMicrosoft Store website.

  b. download a working version of 32-bit bootsect.exe . Here is a link to the 32 bit bootsect.exe:

  bootsect7600x86.zip
  From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

  c. Once downloaded, copy the BootSect.exe file in the same folder that contains the file ofWindows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory isC:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

  d. application of the Windows 7 USB/DVD download tool as described on theMicrosoft Store website. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to get microsoft off my icons worlds and I would like to open programs

  I tried to open a program and a screen came and wanted to klnow what to use to open the program, I hit on Adobe Reader and all the icons and the changed info red ito with their logo on it. I went and knocked on Micdosoft default programs Center and every thing came changed to small worlds. I cannot poen any program it to the top of the Microsoft center screen, I need help to return to the original, how to get back to the way it was? I have a G62-355DX laptop.

  Thank you

  Yes, but did not work. This a.m.. I went to f11 to get into system restore went back to 24/02/2012. This is the day I downloaded a game from HP, system took me there. I had other problems with computer games to ruin

  not sure if this is what happened. Thanks for your help, she also stopped my and the emails I had to redo my

  account. So far everything works.

  Once again thank you,

  garnet20

• [JDev12c, ADF] How to get the value of a field from the selected line in af:table and...

  Hallo,

  I want to double click on a line of an af:table to call a page that displays a form (based on a View object) with the details of the selected line.

  I need to go to the second page the value of a field on the line that is selected on the first page.

  How can I do this? In particular, how can I get the value of a field from the selected line? How can I call the second page on double-click on the af line: table?

  Thank you

  F.

  Why would user, you need to pass a value of the line to the shape?

  The framework selects the line you want to display in the form. All you have to do is to show the form with the selected line. It is the framework automatically as long as you use e vo even the same data control.

  Timo

  Post edited by: Timo Hahn
  And the handling double-clicks is described here http://www.oracle.com/technetwork/developer-tools/adf/learnmore/56-handle-doubleclick-in-table-170924.pdf

• How to get back off HP touch smart iQ506

  How can I get off the back of my touchsmart IQ506

  Hello sandy243a,
  
  There is a nice video on the following link, including a walk through the removal of the back cover.
  http://goo.GL/KN51G

• How to get data off a dead hard drive Mac

  I have a Macbook pro 2011 which has been to his last breath for awhile. The battery is disconnected because it turns with it connected, so I need to plug the magsafe charger to make it work. Well now that has stopped working. I just got my new Macbook by mail, so how do I get my data from the old to the new? Target disk mode is not an option, because it will turn not sure what is.

  You have a Time Machine backup, you can restore?

• How to get spamfighter off email program

  attempted to delete in the bar of Thunderbird. nothing works?

  How Spamfighter is integrated in Thunderbird? What is an extension?
  I would check with Spamfighter support first, assuming that they do not have a support web site.

• How to get the Organizer"and"Accepted"data from a BlackBerryEvent

  Hi all

  -J' I send an invitation to the device of BB from Outlook
  -Once received, accept the appt to the BB email application

  When I view the appointment in the native calendar of BB, I can see the "Organizer" fields and "accepted."

  How can we get these data "Organizer" and "Accepted" to a BlackBerryEvent we will get only the PARTICIPANTSin an event.

  Using String email is event.getString(BlackBerryEvent.ATTENDEES,i);.

  any help in this please.

  Thank you

  Gerard

  No, you can get a list of the names of the participants, but not their status.

• How to get more information in the response from the server "250 OK < additional info here >.

  Hi all
  
  I use javamail to send e-mail messages through an SMTP server that responds as follows when I finished sending my DATA:
  
  250 OK < additional information here >
  
  How can I get the text < additional information here > use javamail?
  
  I use the javamail 1.4.3 release. Messages are sent using Transport.send (message mime, containers []).
  
  Thank you very much for your help.
  
  Best regards
  Antonio

  You will need to manage the object yourself (see the FAQ for examples,
  (or the smtpsend.java demo program), and then use the SMTPTransport.getLastServerResponse)
  method (see the javadocs and the demo program).

• How can I turn off an old email from ICloud. It's preventing me from acquiring an account, as all emails go.

  My account has been hacked and I factory restored and started around. How can I disable my old accounts? When I go to iCloud, they don't want to sell me something. There is no access point for management or accounts that I can find. Thank you

  Contact support Apple here:

  http://www.Apple.com/support/iTunes/contact/

• How can I turn off pop up blockers from different sites

  Hello

  I get pop up blockers in my MLS site when I try to send an email to someone.

  Where can I remove it.

  Thank you for your quick response.

  Maria

  HI Maria,

  I would be grateful if you could answer the following questions:

  1. what operating system do you use?
  2. what version of IE are you using?

  While you answer us with more information, please refer to this link:
  Internet Explorer Pop - Up Blocker: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/Internet-Explorer-pop-up-Blocker-frequently-asked-questions

  I hope this helps!

• How to get to each code pixle frame from any video mp4 in c#

  How to read each code pixle frame from any video mp4 in c#

  How to save images in format Mp4 video

  Hi SalmanKhaled,

  The question you have posted is related to Visual c#, and it would be better suited to the MSDN Community.
   
  Please visit the link below to find a community that will provide the support you want.

  http://social.msdn.Microsoft.com/forums/en-us/csharpgeneral/threads