How to get a stop of the screen and then transfer it to an e-mail?

Similar Questions

• When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  The standard specifies:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• IE7 flashes on the screen and then disappears immediately

  When I run IE it flashes on the screen and then disappears. It's been a while since I had the problem so my memory is fuzzy. I think he worked as IE6 but will not work under IE7 and cannot install IE8. I have Windows XP Version 2002 Service Pack 3. Can I reinstall Windows XP and start from scratch without losing all the stuff on my hard drive? Thanks in advance for any help. It is greatly appreciated.

  JW

  Install IE8

  http://www.Microsoft.com/Windows/Internet-Explorer/worldwide-sites.aspx

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Does anyone know how to reach the Tower of paper and zoom effect they use on the TV news? Where they have a document on the screen and then zoom and highlight a part of it?

  I see this sort of thing all the time on the news. They talk of a letter or something like that, and then 'scream' a piece of it that zooms for the Viewer to read.

  Is this something that can be done in Premiere Pro or After Effects? If so, is there a tutorial for that?

  Thank you!

  Ken

  Lots of ways to do so; the final aspect is to you.

  But any change that will involve 2 copies of an image of the document (image, not pdf, text or Word document. Like a paper copy of scan).  At least one must have a resolution in pixels above the dimensions of the video image pixel.

  Example: your video is full HD - 1920 pixels by 1080 pixels.  Scan a 8.5 in. by 11 in the document at 300 dpi and you get an image that is 2550 pixels 3300 pixels.  You put two copies of this document scanned into your sequence of Pr image stacking them on separate video tracks.  A scale down in size to show the entire document and leave one full size.  Be sure to keep the size of the one at the top of the scale.  To the small scale visible under the copy full size, put on a mask or garbage matte on the waist to reveal the text you want to finally show the public.  Reduce the hidden copy and place it in the frame to match the document below.  Animate the scale of the above 100% copy to get the desired zoom effect.

  Add borders, caches, mattes of color or anything else to get the look and the desired effect.

  There are other ways to do so; Some may even be easier.  That's how I'd do.

• How to get a column using the logical AND operator on two columns?

  All columns are the VARCHAR2 data type.
  
  I got out of the table in this way:
  

  col1 col2
  True True
  True false
  False false

  but I want an extra column in this way:

  col1 col2 result
  True True True
  True false false
  Fake fake fake

  as the clear sound output shows this column resut is logical operator AND
  col1 and col2. How to get there?

  WITH t AS
       (SELECT 'True' col1, 'True' col2 FROM DUAL
        UNION ALL
        SELECT 'True' col1, 'False' col2 FROM DUAL
        UNION ALL
        SELECT 'False' col1, 'True' col2 FROM DUAL
        UNION ALL
        SELECT 'False' col1, 'False' col2FROM DUAL)
  SELECT col1,col2,CASE
            WHEN col1 = 'True' AND col2 = 'True'
               THEN 'True'
            WHEN col1 = 'True' AND col2 = 'False'
               THEN 'False'
               WHEN col1 = 'False' AND col2 = 'True'
               THEN 'False'
            WHEN col1 = 'False' AND col2 = 'False'
               THEN 'False'
         END AS RESULT
    FROM t
  

• By clicking on the software Olympus IB just flashes up on top of the screen and then disappears.

  Original title: IB Olympus software

  My Olympus IB software does not open, I uninstalled and reinstalled but don't work when I click it it still flashes on the screen upward, and then disappears again... any ideas

  Hi Kris,

  1 Windows operating system you are using?

  2. were you able to use it before without any problem?

  3. did you of recent changes on the system?

  I suggest you to run the Fixit material and check if it helps.

  Hardware devices do not work or are not detected in Windows

  If you are using Windows 7, you can read the following article and check:

  Troubleshoot camera connection

  You can also consult the following Olympus support link and try to download the software and the Coachman:

  http://support.Olympus-Imaging.com/ibdownload/index/?lang=en

  Also check out the link:

  http://www.Olympus.co.jp/en/support/IMSG/Digicamera/QA/contents/IB/ib_a1.cfm

• How to create a component of the entity and then add a reference to it, in a web site project solution. site when you want to do.

  I have Visual Studio 2010 Professional. On the start page, I started with file, new Web Site and you click New ASP.NET Web Site. I created a new web site and added a default.aspx page. I want to create a library of classes (entity component) and then use the Solution Explorer window to add a reference to the class library project to the web site solution. I'm trying to do from the start. in other words, a request has not created to which I simply add web pages. Is this possible?

  Or do I make file, new project, and create a new web application in place initially to create the class library and to add a reference in the Visual Studio solution.

  Hello

  Check out these resources:

  MSDN - Visual Studio Developer Center
  http://msdn.Microsoft.com/en-us/vstudio/default

  Visual Studio MSDN forums
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  MSDN Visual Studio, and related Forums
  http://social.msdn.Microsoft.com/forums/en-us/category/vsvnext, visualstudio, vsarch, vsdbg, vstest, vstfs, vsdata, vsappdev, visualbasic, visualcsharp, end, visualfsharp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to get a list of the methods and functions to use in the Transformation

  I am developing a transformation to apply the schema of a table in the relational model according to its type of classification. I was able to do this, but I have a doubt, in other words, how get the name of the first additional classification type, listed in the dropdown list of "Selected" of the "additional part" of the section "Types of Classification" of the table "Properties".

  This is the code that I'm working on:

  tables = model.getTableSet () .toArray ();

  for (var t = 0; t < tables.length; t ++) {}

  table = table [t];

  rating = table.getAdditionalClassificationTypes () .toArray ();

  SchemaName = ";

  {if (rating. Length = 0)}

  SchemaName = table.getClassificationType ();

  } else {}

  for (var s = 0; s < classif.length; s + +) {}

  {if (rating [s]! = table.getClassificationType ())}

  SchemaName = rating [s];

  }

  }

  }

  table.setSchema (schemaname);

  }

  The problem lies on the fact that I am able to get the ID of the Type of ranking, but not it's name...

  I was wondering if there is some document that lists the methods, functions, and namespaces that I could use in Data Modeler?

  Thanks in advance

  Wolf Goebel

  Wolf Hello,

  You can find the description of the API in the following directory:

  \datamodeler\datamodeler\xmlmetadata\doc

  Best regards

  Joop

• How to get a color of the label and the UID of that color in Indesign CC 2015?

  Hello

  I found the API to set the color of the tag XML in InDesign CC 2015 as below:

  IXMLTagCommands::SetTagColor(IDataBase* db, UID tag, UID color);
  

  But I cannot yet understand where I can get the UID of different colors. Can someone help me with the file name for the same thing?

  Also, is it possible to get the XML tag color?

  Hi kapoor_aman27,

  different colors, take a look at IUIColorUtils in the SDK.

  Markus

• Lately when I try to load Outlook Express, it flashes on the screen and then disappear. I have try several times so that it can load. What is the problem?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You are asking in the wrong forum for Outlook Express. Use instead;
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/threads

  In addition, to view details about your problem in the body of the message.

  Robert Sparnaaij [MVP-Outlook]
  Outlook guides and much more: HowTo - Outlook.com
  Outlook tips: MSOutlook.info

• How can I fix stop error (blue screen) occurs whenever I try to open a link of U-Tube? I am running Windows XP.

  Whenever I receive an email containing a link to U-Tube, or try to connect to a position of U-Tube by link via my browser, it starts to open up and then freezes. The computer shuts down after briefly showing a blue error screen.

  This happens if the browser is IE, Firefox, Google, or Google Chrome.
  I tried the system restore, but it will not go to any control point before this event began, about four weeks ago.
  I also tried Mats_Run.Codec.exe, MS Automated Troubleshooting service, nothing helps.

  You would get further faster and with less effort, if we know a little more about your system and you can eliminate the 'try' things.

  What is your system brand and model?

  What is your version of XP and the Service Pack?

  You will always be to 'catch' the BSOD if you do this:

  XP is configured to restart automatically on some system failures, you will need to disable this feature for the information of the blue screen of death (BSOD) will remain on the screen for you to see.

  You must also configure XP to create a memory for each BSOD dump file, so you'll have a crash dump file to watch later if debugging more is necessary.

  If your system crashes later, the information you need will always be on the screen and then you can use the information in the dump files memory to understand what the problem is and fix it.

  Disable automatic restart in case of system error

  XP restarts on system failure, so automatically configure your system so it does not, then you can see the error message.

  Configure your system does not automatically restart on system failure

  Right click my computer, properties, advanced, startup and recovery settings.

  In the system failure section:

  Put a check mark in the box "write an event to the system log.
  Put a check mark in the box "send an administrative alert.
  Uncheck 'automatically restart '.

  In the Write debugging information section select:

  Partial dump (64 KB)

  Set the directory small dumpster:

  %SystemRoot%\Minidump

  Click OK, OK.

  Restart your computer.

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  This sounds like a video driver issue, so we can see what you have for your system, audio and video drivers.

  If you need help to know what your video driver and audio situation, and where to get possible improvements to your video and sound drivers, follow these steps:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  For more audio information, expand components, click on Sound Device, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  If you want to get more information on your BSOD, follow these steps:

  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).

• I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

  Hi Kerrkid90,

  Welcome to the Microsoft Answers Community Forum site!

  To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

  2. run the setup.exe file

  3. right-click on it and run as administrator.

  If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

  http://support.Microsoft.com/kb/290301

  In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

  http://forums.aeriagames.com/?f=6

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• How can I get casscade toolbar at the top of the screen and not on the side

  taskbar

  How can I get casscade toolbar at the top of the screen and not on the side

  How can I get casscade toolbar at the top of the screen and not on the side

  If you mean that you want the taskbar to be placed at the top of the screen...

  Right-click on the taskbar, don't check that no check mark to 'lock the taskbar '.

  Method 1:

  Left-click in the taskbar and HOLD > drag the taskbar to the top of the screen.

  Method 2:

  Right click on the task bar > click Properties > tab taskbar at the top > in place of the taskbar on the screen, click on the pointer, and then select top > click OK when finished.

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.