How to get a working scroll effect?

Similar Questions

• How can I create a scroll effect when the manuscripts of user to the bottom of the image will be blurred?

  How can I create a scroll effect when the manuscripts of user to the bottom of the image will be blurred?

  Hello

  You can create a scrolling movement where the image fade out the scroll, you must use the tab opacity under the effects of scroll Panel.

  If you need especially be blur on the image, then you must change this image in any editing program like blurry image to make a copy of this image, then place the two images (real and blurry) on this page and use the scrolling motion or fade option to replace the images.

• How to get PCoIP working for LAN for Internet Clients?

  A bit confused and I can miss something simple.

  We have a simple configuration, a connection to the server view 80 LAN based clients... everything was many years and we are on version 5.3.4.

  We have added a certificate to our login server view, punch a few holes through the firewall and makes connections work on the internet.

  To get that to work with PCoIP, I had to check of course the PCoIP Secure Gateway and PCoIP URL specified and external address correct external IP from our view connection to the server.

  This works perfectly on internet.

  But making internal LAN clients switch PCoIP because they get the external IP address and they have problems with this... If I uncheck the 'use PCoIP Secure Gateway PCoIP connections to the desktop', then the LAN clients connect through PCoIP very well.

  Our firewall is managed and hosted by a third party.

  How is it possible to make the customers and LAN clients on the work of the internet at the same time?  How LAN clients can work when check the option use PCoIP IP secure gateway address external to the URL and this is the external IP address of the server view connection?  Is a firewall issue or am I missing something simple?

  In most environments, there will be separate for internal and external connections connection servers.  We're associated with a server security for external connections, and the other will be internal only.  This will allow you also to the connection of tag servers to restrict internet access.

• How to get the vertical scroll bar is displayed for control panel

  Hi there, Im a beginner in Flex and I'm working on my first application for a client. I have the most difficult time to get a vertical scroll bar to work for a Panel control, that I use. Here's the overview:
  
  1. I have a control of the application with a horizontal layout
  2. I have a Vbox left with 2 panels on top of the other,
  3 - I have a Panel on the right with a bunch of text controls just above another.
  
  the application looks like this. Think fair spaces and dashes since this wont let me enjoy the areas:
  
  ______________________
  | - - - - - - - - -| - - - - text - - - - |
  | - - - - - - - - -| - - - - text - - - - |
  | - - - - - - - - -| - - - - text - - - - |
  | ---------------| - - - - text - - - - |
  | - - - - - - - - -| - - - - text - - - - | -browser window ends here
  | - - - - - - - - -| - - - - text - - - - |
  | - - - - - - - - -| - - - - text - - - - |
  ______________________
  
  
  MY PROBLEM: I would like the application to stay confined to the browser window and have scroll bars appear in the right panel when text controls contained too long for the browser window. Yet, I can't make it work, Ive tried to use clipContent = true and activation verticalScrollPolicy but nothing seems to make the sign on the right contrain at the height of the browser window.
  
  I have a feeling it's something really simple so any help would be LARGELY APPRECIATED!
  
  The best
  Stephen

  I have it! Thanks Darin for work through this with me. Liike looks like, I really need the Hbox, so do the layout of Panel = "absolute" as josh suggested. Then wrap all text with a vbox controls, Viola! I get scrolling as expected! Here's the final MXML:

  
  http://www.Adobe.com/2006/mxml"layout ="horizontal">
  
  
  
  
  
  
  
  
  
  
  
  Here is a bunch of text in a single text control
  
  ]]>
  
  
  
  
  
  Ashraf asdawdd wadmdwad mildm awdn wad I niawfnaf nawfn awfn awifn awf
  
  adsadwadwadawd
  
  asdadwavawvvawvaw
  
  ]]>
  
  
  
  
  
  asdasdsav
  
  asdasdsadwninib
  
  awnvndzln
  
  qwanil
  
  asbnil nl
  
  ]]>
  
  
  
  
  

  Thank you very much!
  s

• How can I activate the scrolling of the effects? I get "to activate scrolling effects your page must use a unique fixed stopping point." How can I do this?

  I have tried several things to enable scrolling of the effects, however, I can't seem to make it work. I get the message ' to activate the effects of scroll your page should use a unique fixed stopping point. " How can I change this so that my tab scroller are available? It's my first week using Muse, so I am very familiar with the software.

  Thank you!

  Hello

  is that you have already looked at working on the site so please be sure 2 things to activate the effects of roll for the site.

  1. There is only a breakpoint in the page as shown in the screenshot below.

  

  2 right-click on the breakpoint bar and select 'Breakpoint properties' and select 'Fixed width' instead of liquid.

   

  In case you are starting from scratch then be sure to select 'Fixed width' at the time of the creation of the new site.

  

  Kind regards

  Vivek

• Satellite L450D 11 X - How to get WLAN working again?

  Hello

  I recently had problems with my 4 years L450D 11 X machine with everything slow upward.
  I seem to have solved this problem by reinstalling Windows 7.

  Now I can't get access to broadband via Ethernet cable. I downloaded the Realtek RTL802E/8103 drivers and run them to see if this will fix the problem, but it did not work.

  I would be grateful for any suggestion how I can return the wireless connection.

  Thank you

  If you want to use the WLAN to all first your wireless network adapter must be installed correctly. You are right. Your laptop has Realtek WLAN card inside. When the wireless network adapter is installed properly, it must be enabled.
  If everything works well, you can enable it with the key FN + F8 combination. You can use it to toggle WLAN card?

  As I can see that your laptop has been offered with Win7 home premium 64-bit. Are you using the original recovery image and a notebook with factory settings or your own version of the OS?

• Satellite M40X - how to get WiFi working again?

  Hello

  Sorry to bother with a question that has probably been implemented responded here before, I could not find.

  Have this old laptop that had its pilot wireless has changed. My long time friend did something for her so my iphone would be hotspot to it but it buggered the wifi connection. It gets only internet when it is plugged and I want wifi to work again.

  How can I keep someone please.

  Toshiba Satellite M40X PSM4XM-03Z008

  Thanks in advance

  Until we start discussion tell us about your machine.
  What operating system do you use?
  Wireless network adapter is correctly installed (listed in the Device Manager)?
  Can you turn it correctly?

  When you analyze the area is your visible WLAN for your M40X or WLAN is completely unusable?

• Upgrade Vista to Tecra A8-185 - how to get the work of the Service for the Protection of HARD drive?

  Hello

  does anyone know how and where can I get software updates because Vista does not support Protection of HARD drive so HARD drive PS services does not work :(
  I need to update the software HDD P.S. Shock Sensor but can not find anywhere.

  Hello

  It's a very bad situation, but at the present time there is no Vista for Tecra A8 drivers. Only thing to do is check http://pc-support.toshiba-europe.com/vista/ from time to time and see if the drivers will be available in the near future.

  Good luck!

  BTW: http://support.toshiba-tro.de/kb0/TSB7201PA0007R01.htm :(

• How to get the work of localization

  It's finally time to get the site working in my apps and I'm getting a little frustrated. I have 2 newer phones and I can't work. I have a Curve 8320, which returns a BluetoothSerialPortGPSProvider little matter what I spend in criteria to LocationProvider.getInstance (). Which surprises me because bluetooth is disabled. I also have a storm that returns the value null, no matter what I go for a test.

  How exactly do any location valid on one of these devices? Even a cellsite location would be perfect.

  Better yet, what is the best practice to get the location of any BlackBerry with OS smart phone preferably > = 4.3?

  I spent a few days looking through the forums and knowledge base, and I can't it to work...

  First of all, the 8320 does not have internal GPS, so return a BlueTooth device is actually expected behavior.

  Please see the attached article:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800703/What_Is...

  Then try passing a null test to get the provider of location on the storm. This gives you the provider 'by default'. If you're on Verizon, it's stand-alone GPS provider, because you can't have something else, without being a developer of Verizon.

• How to get HTML5 working for firefox videos?

  So, recently, I built a PC. I installed firefox and can't seem to get HTML 5 video work. I activated webm in the config to get at least the HD on youtube but without that I would be stuck in that loading only in 360 p. When I go to the youtube HTML5 test page it has no notches for H.264 and MSE & H.264. Not sure what the problem is. Firefox not HTML 5 fine on my old laptop. I moved my my old firefox profile to my new firefox so that I would keep all my preferences and so on. Also, I'm on Widnows 8.1 N if that all makes a difference.

  I think with the edition of 'n', you will need to download the Feature Pack Media:

  https://support.Microsoft.com/kb/2929699
  http://www.Microsoft.com/download/details.aspx?ID=42503

• How to get google work once again, I tried all of the suggestions I've seen so far!

  The service Google has suddenly stopped working in Firefox. In the box of the home page, of toolbar and to address, when I search I just get a blank screen, no results.

  I uninstalled Firefox and reinstalled from a new download. I checked all add ons and plugins are up-to-date, I did a full system scan to check the malware and nothing seems to work.

  Someone at - it ideas?

  You can check if you have the XML files including Google's default search engines still in the searchplugins folder in the Firefox program folder.
  
  If this isn't the case, then you need to reinstall Firefox.

  Try to use the extension SearchReset reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  • http://KB.mozillazine.org/Unable_to_search_or_add_new_engines

• How to get Wlan working on the Satellite Pro 6000 Win2000 Sp4

  Hello
  It is possible to get the wlan is working on a Toshiba Satellite 6000 under Windows 2000 Sp4?
  There are many indications in other Threads, but nothing has worked.
  Does anyone have a step by step instruction?

  Thanks for the help,
  Nico

  Very important to know if your Satellite Pro 6000 laptop was equipped with WLan car or not!

  If the wireless network adapter is available please check if the right WLan driver has been installed and if the wireless network adapter has been properly recognized!

  I searched a little one found that the wireless network cards optional to this series of laptop; This means that some 6000 Pro will be delivered with the Wlan card and some books don't have this module!

• How to get the worker thread to wait for a course of UI thread ends

  I managed so far to have a thread so far work send a signal to a class in the UI thread, view a map, capture the data in this worksheet and send a signal to slot in worker thread.

  To test that the steps in the UI could do I just put the worker thread in a loop with a sleep and a counter.

  What I don't know is how interrupt the loop when the final signal is sent. I know that the signal is received but the crack does not control until that the loop ends while I want the slot for the control reception and tell the loop at the end.

  I read the documentation in BlackBBerry and Qt on the threads, mutexes, condvars, QWaitCondition etc., but none of them quite make sense to me in this situation and I can't determine which would be the best or the only one to use here.

  Anyone could do his script to work for them?

  Does not appear that the use of mutexes, condvars, are applicable to this situation, as I have only main and a worker thread to synchronize. Signal wire loop blocks so slot does not control until the loop ends. This makes sense because a thread can have only a single process point of execution. Maybe with another thread, it might work but cannot solve the logic.

  However, to find a simple solution using a thread with a loop containing beds and overall, set variables to date by the UI thread that the loop check and then fall back to sleep or ends. I don't allow so many people then, if the loop has not yet finished I invited user "More time to enter the data do you need?" and set end or loop.

• How to get the horizontal scroll bar of a Table?

  Hi all
  
  According to my requirement, I display multiple records in a form in a tabular Format. But here I must show 21 columns in this table that is too high. I am able to view it, but because it I get a scroll bar horizontal to the screen as all columns not in the normal window screen space. But its weird since the research once I am to right scrolling columns, but bar header and Global buttons above are not displayed, they are related to the normal screen space.
  
  Is it possible to have a horizontal scroll bar only for this table instead of the whole screen so that on the slider, only the rows in the table will be beshifted ant had displayed?
  
  With our thanks
  Gerber

  try this approach.
  include an element of plain text before and an array element.
  include HTML tags in the raw text element to allow horizontal scrolling

  Prasanna-

• How to get OCR working

  Hello

  Anyone can guide me please you the steps to make the work of OCR in document scan.

  I scan the document, but can see an option that can enable or show me OCR in action.

  Thank you

  Shivani

  Yes, the instructions are terribly poor - quite remarkable really. I looked through tons of videos on YouTube to pick up some basics. As far as I can see the OCR works only in Office, Word, and Powerpoint. In Word, go to the Insert tab, then on the far right you will see two new buttons that are Sprout, Capture and text plugins. Choose the text and which will capture your touchmat text and perform the OCR.

  Not sure if there is another way to do it. I do not understand why there seems to be a complete lack of tutorials beyond 6 or 7 very simple videos. The manual doesn't help much with the software.