How to get Wlan working on the Satellite Pro 6000 Win2000 Sp4

Similar Questions

• How to remove the old fan and heatsink of the Satellite Pro 6000

  Hey people,

  Is there anyone who can help me with instructions step by step to remove the fan and the heatsink, I have a Toshiba Satellite Pro 6000...

  Concerning

  Barnie

  Try this guide shown here:
  http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm

  The 6100 is almost the same as the 6000. This guide should be a big help. (Click on each image for a more detailed view).

  Kind regards

  chain

• The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

  Hello, need information about mainbord...
  Is the the same Satellite Pro 6000 and 6100 mainbord?

  Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

  The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

  The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.

• The screen works not the Satellite Pro a

  My satellite pro, do not know what model because the sticker is worn, but I think its something like L18850
  When I was with her today, he went to sleep, when I rebooted, it just would not come on the screen.
  I tried removing the battery, now the Start button / stop for 45 seconds etc... That did not work.

  I tried to start and stop a lot of times, it starts the desktop computer, I can hear the sound of it connection, but it seems to take more time for the sound to happen now and it seems to the connection ring twice, 10 minutes apart.

  One of the moments where I turned it on it the screen worked and it has loaded the system recovery, I chose to keep my existing files and the partition, the screen worked for the half-hour it took to recover windows, then when it restarted the screen wasn't working again...

  It's very frustrating as a week ago, that the laptop was with Toshiba repair, there is no previous problems with the screen, I sent him with a cooling fan failure...

  Any help would be appreciated, I need laptop badly I work online and need to pay the rent...

  Sorry to hear that very annoying if computer laptop / computer starts to malfunction.
  From my point of view, no one here in the forum would be able to help this issue, because I think that there is something wrong with the hardware.

  You can connect the external monitor just to check if something is not visible on the 2nd screen but of course, this would not correct the problem of the laptop.

  Maybe the problem is related to the last laptop repair? You said that the laptop has been send to the service about a week ago, it's just a guess, but maybe the technician made some mistakes last time who knows that I recommend you to get in touch with the guys again

• How to get factory reset disks for Satellite Pro L40?

  Hi all

  Ive got someone other Toshiba Satellite Pro L40 attempt to fix, it got a virus, and the best way to solve this problem is to do a factory reset, so I copied all the personal files on DVD and went to do a factory reset, but told me that I need the discs...

  But apparently, this laptop was given as a replacement by an insurance company, and no records were provided, then how to to get the disks?

  Thank you
  Angus

  Hello

  Not sure if you will be able to order this disc from this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Sometimes these disks cannot be ordered if the notebook series would be dropped.
  In any case, check out the page and try

  It may be possible to order this disc

• ODD has stopped working on the Satellite Pro A200

  I have a Satellite Pro A200 - PSAE1E.

  The CD/DVD was working fine and then stopped. I put in another CD and it went through the process of trying to find - but could not.
  It ejects the disc. I tried with other CD in the same direction. Yellow light works during the research process.

  I tried to remove the CD from the Device Manager and remove entries of regedit (as suggested on another thread) all without success.
  The computer is a little over a year old and I have no recourse to assistance centers as I live in West Africa.

  Can anyone offer any suggestions?

  Hello

  Is it possible to boot from the recovery disc?
  I mean the CD/DVD drive reads the original disc Toshiba and it of possible to read other CD or DVD from different manufacturers?

  If all the other disks are not readable then the question looks like a WEIRD error and in most cases the STRANGE must be replaced.

  PS: Please note that if you try to boot from the recovery disc then start a recovery procedure will format the HARD drive and reinstall it the entire image of Toshiba.

• Re: Fn key does not work on the Satellite Pro C660 2TQ

  Hello

  I bought laptop Satellite Pro C660 - 2TQ PSC0RE - 01801QGR 2 days ago and found the Fn key does not.
  Someone help me to activate it?

  Hello

  Select all programs-> Toshiba-> Flash cards, and then restart this utility.
  Now if you press Fn + F8, you should be able to turn on or turn off the WiFi.
  The FN + F9 active needs or disable the touchpad.

• Cooling system works well on Satellite Pro 6000

  Hello
  I get a message from the operating system on my SP6000, the message tells me that my cooling system does not work well, and after the computer turns off. It sews the cooling fan is not running. What a hardware or software problem?

  Thank you

  Sammy.

  Hello

  If the cooling module doesn't run the very danger because the CPU can cause damage.
  I put t think that it s a software problem because fans should operate without any software.
  Of course the Toshiba energy saver, which is preinstalled on the use of the CPU and fan control unit.

  First of all, you should check the fans and if necessary try to clean with the vacuum cleaner.
  If after this procedure, the cooling modules cannot work properly if you need to contact the service.

• Satellite L450D 11 X - How to get WLAN working again?

  Hello

  I recently had problems with my 4 years L450D 11 X machine with everything slow upward.
  I seem to have solved this problem by reinstalling Windows 7.

  Now I can't get access to broadband via Ethernet cable. I downloaded the Realtek RTL802E/8103 drivers and run them to see if this will fix the problem, but it did not work.

  I would be grateful for any suggestion how I can return the wireless connection.

  Thank you

  If you want to use the WLAN to all first your wireless network adapter must be installed correctly. You are right. Your laptop has Realtek WLAN card inside. When the wireless network adapter is installed properly, it must be enabled.
  If everything works well, you can enable it with the key FN + F8 combination. You can use it to toggle WLAN card?

  As I can see that your laptop has been offered with Win7 home premium 64-bit. Are you using the original recovery image and a notebook with factory settings or your own version of the OS?

• How to get WLAN running on my Satellite A300?

  Hello world

  I had to destroy my hard drive (virus), but I don't have a recovery disk, and so I have to install all the drivers manually. Before grinding it I looked to a recovery device I had heard before, but there was only C:. Everythink works fine so far, except for the fact that my WIFI is not working. Find my router and many others, it is impossible to connect.
  I don't even know if I took the right driver.

  My WiFi card seems to be "pa3655u-1mpc" and I downloaded the "WiFi Link 5100 AGN". Which to correct (so far)?

  My exact model is:
  Satellite A300 - 20T system unit
  MODEL NR. PSAGCE 09K006AR

  Any help is appreciated!

  Yes, it was OK. Your laptop has network map without WIRE Intel 5100AGN inside and the correct driver, you can find the portal of Toshiba WLAN - http://aps2.toshiba-tro.de/wlan/

  Wireless network card appears correctly in the Device Manager?

• The Touchpad right button does not work on the Satellite Pro L series

  The icon in the taskbar indicates that the right button is permanently pressed, if it is not.
  So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving.
  I listen to the radio a lot and do not want to display on.

  > The icon on the task bar shows that the right button is permanently pressed, if it is not.
  > So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  This could be linked to defective button. If you cannot use the right button, and the button appears to be clicked down, then I suppose that its hardware malfunction.
  In this case it must be replaced.

  > In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving. I listen to the radio a lot, and don t want the display on.

  Have you chosen the right power Plan? In Control Panel-> power options you have to choose the diet plan and should click: change plan settings. Here, you can change the time when the display must be disabled.
  If this does not work, then I guess that this feature does not work because you press the button of the touchpad and the windows OS think that the notebook is in use

• Satellite Pro 6000 - how can I update the BIOS?

  Hi all

  I have the problem that my laptop does not start 9 of 10 times with the message: * block 1 BIOS is damaged, call your service man.

  I want to update BIOS but for the Satellite Pro 6000 I can only find an update the BIOS from Windows. But my laptop does not start! Rarely the machine starts, but when I try to update the BIOS, I get the message that I already have the latest version of the BIOS

  My questions:
  * Is there a BIOS update file that is a BIOS floppy? (for example the Satellite Pro 6100 has 2 BIOS files, 1 Windows and 1 making a floppy disk)
  * Is it possible to update the BIOS with the same version of Windows?

  Or perhaps there is another solution for this problem? Has no need to update my BIOS?

  Thank you.

  Hans

  Hello

  I agree with Luke.
  The rom Bios module seems to be damage.
  Either it must be replaced or flashed again.

  But you won't be able to do that! The update of the Bios on the Toshiba page focuses on winning and you will not be able to update if the windows are not running.

  You last chance is an ASP that could check the BIOS ROM.
  As I said, most high, maybe new reflash module Rom help but cela can be answered simply by an ASP technician who checked this.

• The maximum size of HDD for Satellite Pro 6000?

  Hi, I am trying to install a 60 GB hard drive, but it is shaped, and it stops at the instalation of Windows XP Pro.

  Is there a size limit of HD?

  Thank you
  Ronaldo

  Hello

  It stops without any error message? If this isn't the case, then try another copy of Windows XP since the Satellite Pro 6000 shouldn´t have problems with this drive. I had 2 years a similar machine and I also got a 60 GB Toshiba HARD drive installed. It worked like a charm, so I can't imagine that the hard drive could be the problem.

  See you soon

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• DVD burner for Satellite Pro 6000?

  I have a lite - on dvd slimline burner we don't work in the sp6000
  now, I want to know Witch one does not work in a satellite pro 6000?

  (DVD burner or a combination dvd/CD-RW)

  As far as I know that no engraver of DVD or combo for Satellite Pro 6000 driver is available. Download and review the Satellite Pro 6000 user manual. There are readers who must be compatible.
  I found these:
  Reader of DVD - ROM SD-C2502
  -Player CD-R/RW UJDA340
  -Drive CD-RW/DVD-ROM UJDA720
  -Drive CD-RW/DVD-ROM SD-R2102
  Reader of DVD - ROM GDR-8081

  But if you want to be 100% sure, you can contact the ASP in your country. There also order you the discs