How to get and install SP3?

Similar Questions

• How to get and install the file txtsetup.oem for xp

  need to know how to get and install the txtsetup.oem file to install xp

  Hello

  The easiest way would be to visit the website of the manufacturer of the motherboard. This would normally have downloads for any RAID drivers required for the loading of Windows XP. The download can be an "executable" who writes a disk for you. It can be also something like a zip file with all files inside that must be extracted and copied to a floppy disk.

  If your PC is not a floppy drive, life becomes quite complicated.

  Please mark this as useful or response if applicable.

  Tricky

• How to get and install Firefox OS?

  I don't know why it is such a secret, but how to download Firefox OS and install it on my machine or virtual machine?

  I can't find these basics on the mozilla.org site:

  (1) hardware compatibility list
  2) source code and build instructions
  (3) installation instructions

  I took a shot in the water and checked on the developer site. There is just the page I was looking for there:

  https://developer.Mozilla.org/en-us/Firefox_OS/Building_and_installing_Firefox_OS

• How to get and install an older version of Firefox on my Mac 10.4.11? I installed by mistake a new version which took on my older version that is not appropriate for my Mac.

  We get a message that says "you cannot use the"Firefox.app"application with this version of Mac OS X.

  How can I reinstall an older version of Firefox that works on our Mac?

  Firefox 4 versions and more late does not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

  the most recent for your operating system version is 3.6.24 which you can download here:

  http://www.Mozilla.org/en-us/Firefox/all-older.html

  See also:

  Installing Firefox on Mac

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• How to get and install compare.api for Adobe Acrobat Pro ver. 10.1.16

  I have Adobe Acrobat Pro ver. 10.1.16.13 and in About Adobe Plug-Ins I see that Compare.api wasn't loaded yet, I am certified user since the 24/09/2015.

  

  It is located under the view menu in Acrobat X, it seems.

• Why my Windows XP not download and install SP3 or updates, get the error code: 0x8024400a

  I have a Windows XP laptop and it will not download or install the updates that it says I need to download and install sp3 but it won't either. There is an error message error code: 0x8024400a

  Can you help me

  Older than SP3 Windows XP is not supported, this means that you must have SP3 to get the update.

  Try to run the tool:

  http://support.Microsoft.com/mats/windows_update/

• How and where can I get and install different profiles of lenses?

  I need help to know how and where I can get and install different lenses profiles in Lightroom and Photoshop.

  Hi fl - lou.

  Please post on the adobe forums

  Please check these links below-

  https://helpx.Adobe.com/x-productkb/multi/lens-profile-support-Lightroom-4.html

  Adobe - Adobe Lens profile Downloader: for Windows: Adobe Lens profile Downloader 1.0.1

  The location of the profile of lenses and camera profile

  Windows-

  C:\Program Files\Adobe\Adobe Lightroom\Resources\CameraProfiles\Camera

  C:\Program Files\Adobe\Adobe Lightroom\Resources\LensProfiles\1.0

  I hope this helps

  Concerning

  Rohit

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• How to download and install on another computer without internet connection?

  I have an old computer with windows XP Home Edition. How to download and install on another computer without internet connection?  Files such as DirectX, real player, Media Player.  What I find it just download and install the file must then go to the internet.

  The following site may be worth a visit:

  Microsoft Download Center
  http://www.Microsoft.com/download/en/Search.aspx?p=0&r=10&t=&s=availabledate ~ Descending true... some files are simply web installers, but if you continue
  the research you should be able to find the full downloads. You can
  Talk about the size of the file if you get the full download.

  For Microsoft files... it can help search for developer files
  or redistributable.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Use DirectX Runtimes (June 2010)
  http://www.Microsoft.com/download/en/details.aspx?ID=8109

  RealPlayer
  http://www.filehippo.com/download_realplayer/

  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• How to download and install software animation for xp

  I like the animation I want softwares for animations and also I want to know how to download and install

  Hello

  To help you better, please answer this question.

  Looking for a particular animation software?

  You can use your favorite search engine to download and locate the animation for Windows operating system software.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Hello l have DOWNLOAD and installed sp3 but it is not in Add and remove programs

  Hello l have DOWNLOAD and installed sp3, but it is not in Add and remove programs, wrote sp3 system properties is so this work please help me thnx

  Original title: need

  If your properties system shows SP3 listed, it is installed.

• How to download and install outlook express for free

  How to download and install outlook express for free

  You do not have. OE has never been a stand-alone email client. You are asking this in a XP forum. You have XP? If you do, you have Outlook Express. If you are using XP, what is your problem with OE?

  If you do not OE, maybe this will help.

  Right click on the desktop | New | Shortcut. Go to the * c:\program files\outlook express\msimn.exe *. Click next | Click Finish.  It will be a new shortcut on the desktop.

• How to check and install the drivers for the card

  I wanted to play the game with my HP Compaq 8710p (Windows 7) and said that my video card driver and probably (other drivers noticed yet) are now uninstalled in my
  System. Could you please send me
  links on how to check the
  uninstalled the drivers and how to
  Download and install. Thank you
  in anticipation of the command prompt
  response.

  Zubyjoe

  Your uninstall information

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  or use Revo Uninstaller

  http://www.revouninstaller.com/

  New Nvidia driver

  FTP://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61072.exe

  Other drivers

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3355688&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• How to get the installed Application timestamp programmatically

  How to get the installed Application timestamp programmatically

  Can you please help me.

  http://www.BlackBerry.com/developers/docs/7.1.0api/NET/rim/device/API/system/CodeModuleManager.html#...

  I'm sure you could find yourself by reading the API.

• How to get and replace an d3dx9_.dll file in Win7?

  My computer has lost a d3dx9_dll file and now I find it difficult to send messages to my friends.  I don't know how the file was lost, but how can I solve this problem?

  Hello

  Thanks for posting the question. I've surely you will help find a solution on the issue.

  1. what happens when you tried to send messages?

  2. what program you use to send messages?

  3. What is the full error message?

  4. are you aware of changes to the computer before the show?

  Method 1:

  D3dx9_30.dll is a file related to DirectX. I suggest you to download the latest version of DirectX 11.

  How to download and install DirectX

  http://support.Microsoft.com/kb/179113

  Method 2:

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply back with the State so that we can help you.