How to get everything connected to my domain users

Similar Questions

• I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  You have been discharged into a temporary user account. It may be a glitch, or your user account may be damaged. First try a system restore when things worked. If it suits it, fine. If it is not then your account is damaged and the best thing to do is to create a new user account and copy your data from the old to the new. I would also like to do a Chkdsk and then some hardware diagnostics on the hard drive and RAM to make sure that the material is solid.

  CHKDSK - click here to open the computer. Right click on the hard drive you want to check, and then click Properties. Click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will be prompted, see the disk check for the next time you restart your computer.

  Hardware tests - http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Corrupt user account - if your single administrative user account is damaged (and therefore have what one user account is A Bad Thing), you must log on to the built-in Administrator (disabled by default in Vista) account. From there, you can create a new user account for yourself. In these cases, I prefer not to copy the whole profile to a new way to do not copy the bits corrupt. I prefer a new user account to copy the data (documents, photos, emails, etc.). Here are the instructions to do this. I assumed that you had only an administrative account, then you might want to take a look at the "general recommendations for setting Up user accounts in Vista" at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  Activation of the built-in administrator.

  Method 1. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  If you do not have a Vista installation DVD, you can either make a bootable DVD of Vista repair in the file at this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD.

  After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account.

  Method 2. Or you can use NTpassword to enable the built-in administrator. In both methods, you need third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  http://home.eunet.no/pnordahl/ntpasswd/

  B. create a new user account for yourself and by copying data from your damaged to her user account

  1. you are now connected to the built-in Administrator account. Go to control panel > user accounts and create a new Standard user for your daily work. Let's call it "Sheldon" for this example. Also create an administrator user, called 'CompAdmin' (or 'Tech' or similar).

  4 Ouvrezunesession 'Sheldon' once for profile files are created. Now log off 'Sheldon' and 'CompAdmin '. In "CompAdmin", disable the built-in security administrator. Do this from a command prompt:

  Start > Search > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK to the UAC prompt. Now, you will get the command prompt. Type:

  NET user administrator / active: No. [Enter] and exit the command prompt.

  5. always in 'CompAdmin', you want to open two windows explore side by side. Open computer and navigate to C:\Users\old-corrupted-account. Now, do that again, but navigate to C:\Users\Sheldon. Copy the data from 'old-corrupted-account' on records in 'Sheldon '. Remember your Favorites, bookmarks (if you use Firefox) and by e-mail if you use an email like Windows Mail client.

  6. When you are finished, log in to "Sheldon. All your stuff should be there. When you are sure to have what you need, you can remove the old man-corrupted-account control panel > user accounts.

  General C. recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• How to give administrative rights for the domain users (user is outside organization).

  Hello

  How to give administrative rights for the domain users (user is outside organization).

  If the employee works in the company of xxxx but it supports the client project and is located on the place of the customer, but it does not use the client computer and not on the client domain as well, but the employee is in the company of xxxx must be given administrative rights to the computer. can someone help me on this ASAP.

  Thank you

  MURUGESAN Rudy,

  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• How to get wifi connection after reinstalling factory default DVD for Iconia W3-810?

  My W3-810 Iconia has been reset using Acer Recovery DVD. After that 8 window has been restarted, he not been able to find the wireless device.

  Does anyone know how to get a wifi connection after reinstalling factory default DVD?

  Best is to download the drivers for a different machine, then transfer to the W3 with a USB or SD card. Once they are installed included you be back running.

• How to get the connection to the serial port 9-pin on Satellite A100

  Hello
  Anyone know if its possible to get a connection Series 9 pins for my satellite a100? Maybe USB to serial or pcmcia card?
  Thank you
  Gary

  Hello

  Take a look at this page
  http://www.usbgear.com/serial-USB-adapter/index.cfm

  Good bye

• How to get the connection ID in SQL?

  Hello
  How to get login Id in sql?
  such as "select * from table1 where userlogined =: {$$loginid}"?
  
  Best regards
  
  Jason Gao

  If you want to get the user name for the user, you can use the variable: xdo_user_name.
  Select: xdo_user_name of the double

  Also check this out to learn how to use it to filter the data for a specific user:
  http://blogs.Oracle.com/XmlPublisher/2007/04/10/

  Thank you!

• How to get an array of integers to user in the User Interface

  Hi all. I'm not a very experienced user of the CVI. I have almost exclusively coding in LabVIEW but have a client who wants all of their work in the CVI.

  I've been very fruitful so far (set up a Modbus API from scratch that supports all types of connection) but am confused on how I can get the integer multiples of the user without limiting the number of integers I can get. Essentially, I need to be able to get an array of integers to the user.

  General information, I am building a user interface to test my Modbus API. There are Modbus functions to 'Write multiple registers' and 'write multiple coils. I want the user to be able to enter all the values they want to write in one command.

  What is the best way to get an array of integers through the user interface?

  The easiest way is probably to allow user input in a textbox control numbers: items can be separated by spaces, commas, or even a line break (using ctrl + Enter). You will then need to extract the string from the TextBox and analyzed for numeric values using any non-digit character as a separator: strspn (string, '0123456789'); can be used for this.

  More complex, another possibility is to use a table control to receive user input: you Dresses an empty table with a reasonable number of roews, or you need some codes to add new lines as long as the user fills all those already existing. On the other hand, it will be easier since data recovery in a simple statement, you will all return values: GetTableCellRangeVals (panelHandle, PANEL_TABLE, VAL_TABLE_COLUMN_RANGE (1), table, VAL_COLUMN_MAJOR);

• How to get the IP address of the user in OBIEE

  Hello
  
  I would like to know how get the IP address of the user in OBIEE. is this possible? That is, when the user connects to presentation services is it possible to know the IP address of the user's computer.
  
  I found the thread similar where to find host address and session id it says that we can get these details in the App Server logs.
  
  We want to follow the user connected from what IP address in presentation services.
  
  Thank you
  Bob

  go to settings > Administration > manage Sessions.

  you will find the Session Management

  Look at the 2nd column: the host address. It will trace the person connected i.p. addresses.

• How to get TS::SequenceContextPtr to customize the user interface

  I want the file of the custom, user interface sequence value therefore need to take stock of the TS:equenceContextPtr, anyone know how to get this point.

  Is there a reason that UIMessages are not enough?

  Just off the top of my head, here are a few concerns with the not not using UIMessages:

  1. How the user interface is unknown when the file of the sequence is developed to set the value.  Without an event or some sort of synchronization you can do exactly that.  UIMessages not only to ensure the right information, but they help also with synchronization.
  
  
  2. The engine does not know this information, and view of execution manager knows that the information for the current execution it is linked to (which changes throughout the life of a series of tests).  Basically, recall of front end, model, and other factors may spawn short executions briefly related to the Manager view of execution.  So if you take the context of the sequence of the current run is perhaps not the right one.
  
  
  3. Writing a user interface will be couple the user interface to your specific sequence file.  At this point, you can use the network variables or global variables or global queues as well.  It might even be better options.

  The situation you describe is exactly why the UIMessages were created.  Maybe you can help me understand why you are set on the use of pointers, you already have?  There might be a better solution for your case if I'm misunderstanding you.

  Thank you

• How to get a license for 10 different users systems...

  Hello

  Can someone help me how to get the genuine license valid for 10 to 20 systems. how much will it cost me?
  BR,
  Chavigny

  Hi Chavigny,

  Thanks for posting in the Microsoft community!

  Customer contact to improve assistance about the copy of volume license.
    http://support.Microsoft.com/GP/ESD-support-phone-numbers

• If I leave a domain, can I still connect with the domain user?

  I used to connect to my computer using a domain user, but one day, I left the field and now I can't log in to this account more...

  Indeed this area no longer exists, so, I can't reach back this area.

  so, is there a way I can log on with this account again? I look forward to configure all settings, new enforcement etc...

  If I delete all items in folder c:\user\xxx of this account, there will be no effect secondary, right? Since I was no longer able to recover this account.

  You cannot restore the account, but you can certainly retrieve information stored in the profile folder.

• How to get the full name of the user of the OPS?

  Hi Experts,

  I know we can get the login controller pageContext.getUserName () user name. Is there a simple way/API to get the full name of the user (name, first name) of the OPS?

  Thank you.

  Hello

  USER name and information of the PERSON are two different concepts. You can get the id of user with pageContext.getUserId () connection. In order to get the first name, last name, you must select it from table PER_ALL_PEOPLE_F.

  You can use the sql select and set pUserId of pageContext.getUserId ();

  SELECT FIRST_NAME, LAST_NAME TO PAP PER_ALL_PEOPLE_F, FND_USER FU

  WHEN TRUNC (SYSDATE) BETWEEN PAP. EFFECTIVE_START_DATE AND PAP. EFFECTIVE_END_DATE

  AND FU. EMPLOYEE_ID = PAP. PERSON_ID

  AND FU. User_id =: pUserId

  Anil

• How to get the full name of the user to a sso.

  Hi all
  
  I am brand new with oracle application server.
  I use oracleAS 10g with SSO enabled. How can I get the full names of the users?
  I know that this information can be obtained with the command 'ldapseach' but I'm looking for information in a view or a package.
  Is it possible to get this information in a view or a package?
  
  Thank you.

  Look at the portal.wwse_api function person_info package
  Maybe it's something similar that you are looking for

• How to get Cisco Connect if I already have various Linksys products...

  Hello

  How can I get a copy of Cisco Connect if I already have a different linksys product?

  WRT610N

  WET610N

  DMA2200

  Thank you

  John

  Cisco Connect is only available for the new version of router... like E1000, E2000, E3000, M10, M20. I hope this helps.

• How to get a connection out of the FireSight matrix?

  Hi all

  someone had a useful suggest how can I get a matrix of useful connection on FireSight management to create a Ruleset for the SAA, which is now on allow all... Should be a list of IP source and destination with the port and maybe a counter - did an investigation into the events of connection - but it's too much information and too many events - and I only events of the last 2 days... I would like to get the result one or two weeks - there may be a way to do this?

  Thanks in advance

  Helmut

  You can generate reports based on the events of connection and connection workflows.  You can create a workflow custom with something as initiator IP, voicemail, IP, dst port, County.  This would give you the number of connections between an IP src/dst on a given DST port.

  Regarding the history of connection that is a difficult question according to the volume of traffic passing through your device.  The default connection limit is 1 M connections.  You can raise as part of the political system's database, but be careful because it hit too high can cause it takes a long time to process requests for connection events.  A week is really all we can always hope and even what is often too long (too many connections).