How to get my box to connect to a server to connect to the server. With the help of 2002 XP pro service Pack 3

Similar Questions

• How to get NB100-11R automatically connect to the WLan on logon

  I just bought a netbook NB100-11R.
  First time that I started it, I went into the network administration panel to set up a wifi access.
  She had detected my wireless network, so I entered the WPA password and it connected correctly. I saved these parameters such as a network location.

  Next time I started than I expected it would he remember these parameters and automatically connect, but I could not get web access.
  Looking at the network admin, this sill has my network listed as the wireless connection, but I had to unlock the Control Panel, select my site again and click on the button 'apply the location as the current configuration', before he would give me a web access, I have to do it every time I start, which will become irritating.

  Is it possible to get to connect automatically when I start?

  What operating system do you use?

  Have you updated the Firmware wireless access point?

• I can't copy my files to windows movie maker. When I try to copy them, I GET a POPUP STATING THAT PROBLEM OCCURRED. Windows Media did the same thing and I have service pack 3 so-called.

  MOVIE MAKER DOES NOT ALLOW ME TO IMPORT FILES TO CREATE A MOVIE. WHEN I create files to create a cd or a slide show with windows media player I have a popup indicating that there is a problem with my cd player or the idon't have a and there a burner cd, used it all the time so far.

  Hi I'mafteru.

  1. don't you make changes before the show?

  Sometimes no Microsoft programs running on the computer may cause this problem. Try the following steps:
  Step 1: Check if a non-Microsoft program is causing this issue
  see How to configure Windows XP to start in a "clean boot" State .
  b. restart the computer and check if the problem persists. If the issue is not persistent, then from the article, follow the method 1 and method 2 to find out if any program is causing the problem.
  c. Once you have found the culprit which is the program that is causing the problem, then uninstall it or reinstall once more to solve the problem.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Step 2: Remove the unwanted registry entry
  a. see the CD-R or CD-RW drive is not recognized as a recordable device
  b. follow the steps in the article, and then restart the computer.
  c. check to see if the problem persists.

  Important: Modifying the registry incorrectly or remove will cause serious damage to the computer. It is recommended to back up the registry before you edit it.
  See How to back up and restore the registry in Windows

  For your reference: Movie Maker frequently asked questions

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get USB 2.0 Mini Bluetooth V2.0 EDR Dongle adapter to work with Windows 7 64 bit?

  How to get USB 2.0 Mini Bluetooth V2.0 EDR Dongle adapter to work with windows 7 64 bit?  Is it possible to download drivers or software for it for Windows 7 64-bit?     When connect my Bluetooth device it gives me the error message he said he know driver installed and does not connect.

  Bluetooth is built into Windows 7 with Microsoft included Bluetooth system.

  However, you must make sure that the USB ports work.

• Yahoo mail and yahoo Web sites not be loading not on safari April 10, 2916. How to get around this problem? Œuvres of chrome! What is the future of mac?

  Yahoo mail and yahoo Web sites not to load not on safari as of April 10, 2016. How to get around this problem? Œuvres of chrome! What is the future of mac?

  Could be a cookie problem...

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click on: Remove all data from the Web site

  If this does not help, you can have this Yahoo pages preventing to open a Safari extension or third party plugin installed.

  In the Safari menu, click Safari > Preferences , and select the tab ' Extensions '. If there are installed extensions, one at a time uninstall and exit then restart Safari to test.

  If it is not a question of extensions, try troubleshooting third-party plug-ins.

  Back to Safari > Preferences. This time select the tab Security Deselect: plug-ins Allow. Quit and restart Safari to test.

  If it makes a difference, the instructions of troubleshooting plugins here.

• I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Original title: problem e mail

  I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Suggestions;

  1. make sure that your e-mail program is your default program.

  2. make sure that your Internet Explorer, or your main browser has all its faults.

  You can do both of the above by following these steps...

  Start button > right column, click default programs > click Set Your Default programs...

  1. click on your e-mail program > it doesn't say "this program has all its defaults"?
  If not, click on choose by default for this program > check all boxes below the list > click on save when finished.

  2 do the same as above for your Internet Explorer, or your main browser.

• How to get to "local group policy editor" without typing gpedit.msc in the command run

  I'm so curious to know how to get to "local group policy editor" without typing gpedit.msc in the command run

  I'm so curious to know how to get to "local group policy editor" without typing gpedit.msc in the command run

  You can reach the 'local security policy' of

  Control of configuration\systeme and Security\Administrative tools

• How user by VM (XP) can connect at the same time?

  Hello guys,.

  We test VMware View 4 and so far work fine, but I have a question? How many user by VM can connect at the same time? I test with 2 VM (XP) in the pool, but I want to use more than 2 users, but when I try to login doesn't say "no resources available", what that means is that a single user by VM? Us who is running Terminal Server and try to find alternatives.

  Thank you

  It's the same as with a XP machine. 1 single user can connect at the same time.

  André

• When I reinstalled windows xp media Center 2005, I get a prompt to insert the disc of windows xp professional service pack 2 CD, I don't have it, what should I do then?

  When I reinstalled windows xp media Center 2005, I invited to insert the disc of windows xp professional service pack 2 CD, I'm not available, what do I do next? If I canceled it, I know that windows installed yet to complete the work. But I'll soon get error and windows do not work properly.

  I am frustrated with Microsoft Corp., why didn't they make things easier for users to enjoy. I noticed all the announced sounds so pleasant during installation.  Everything suddenly it asks for windows professional service pack 2 CD.  where I go to get this information from?

  Can someone help me right now, I am desperately wanted to complete this work. I left my computer hang for hours and hours. waiting for windows xp professional CD disk to copy and install.

  Thanks for your response.

  Luke

  See this link from a previous thread for advice and information.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/is-there-a-way-i-can-still-get-SP2-and-SP3-for/9b917f32-4353-4B7E-BC54-348470f7ff31

• I searched for a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser.  Unknown error. (123).

  You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.

• How to get data from HTTP connection string?

  First of all, I have a PHP page that establishes the connection and the query to the database to get a random string in the database and printing on the page, say the name is: getString.php, such as every time that you refresh the page, the string that is printed on this page can be (or most of the time) different. The next step I wanted to do is to get this string and put it on my application for Blackberry, and I do not know how.

  I use WAP2 for the connection, and I copied the code that is shown here:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  So once the connection is established, how can I get the string content in this page? I had the url of http://mydomain.com/getString.php

  Thank you!

  Why don't you use a StringBuffer?

• How to get SQL * more to connect to my database of Apex?

  How can I get SQL * more to connect to my database of Apex? By using the username and password I use to connect to Apex does not (ORA-01017). What should I do to connect to my db Apex?
  
  Thank you
  Kim

  Connection string is "connect username/password@database".

  The analysis schema is a database account, that's why you can log on to SQL * more like that.

  This allows to get the database name

  select instance_name from v$instance;
  

  And if you forgot the password for the PT

  alter user PT identified by 'your_new_password';
  

  Scott

• Some sites have recently become blocked on my computer. I either get I am not connected to the internet or redirected. How can I fix it?

  I went on vacation, when I came back the following Web sites have been blocked. Facebook, cracked and TMZ. I can't access from this computer, either with Fixfox or IE. They are accessible by other computers to this work. Is there a way to unlock it?
  With Facebook, I get the message saying that I am not connected to the internet. With the other 2, I'm redirected to Yahoo.com.
  Anyone have any ideas?
  Thank you

  Close all Web browsers (Firefox, IE, Opera, Safari, etc.).

  -> Open my computer-> go to Windows drive (C:\)-> Windows-> System32-> drivers-> etc-> file opened in Notepad-> DELETE all THE LINES below this line hosts : 127.0.0.1 localhost -> save the file and close-> now open Web browsers and check

  For Facebook, try this:

  Cannot connect to Web sites

  https://support.Mozilla.com/en-us/KB/cannot%20log%20in%20To%20websites

  Check and tell if its working.

• How can I get my computer to connect to the internet evey time that I boot it up without having to reset the network card?

  Whenever I start my computer I have to reset the network adapter or get new settings of IP so he can connect to the internet. When that I starts it connects to a LAN only.  I have cable internet. My modem works fine. I have Windows Vista and Internet Explorer 8.

  Hello

  See the following link, it worked for me. I'm sure that it will work for you as well.

  http://www.Vistax64.com/Vista-General/151727-connect-Internet-startup.html

• OIM 11 g: how to get a remote database connection using API

  Is there a way to get a remote java.sql.Connection IOM with the OIM 11 g API Base?
  
  I know that during the execution of code on the server, you can use...
  
  Platform.getOperationalDS () .getConnection ();
  
  .. .and remotely using OIMClient...
  
  XLClientSecurityAssociation.setClientHandle (oimClient);
  tcDataProvider db = new tcDataBaseClient();
  
  .. .but I would get a java.sql.Connection (instead of tcDataProvider).
  
  Any suggestions?
  
  Thank you.

  waynec wrote:
  Is there a way to get a remote java.sql.Connection IOM with the OIM 11 g API Base?

  I know that during the execution of code on the server, you can use...

  Platform.getOperationalDS () .getConnection ();

  .. .and remotely using OIMClient...

  XLClientSecurityAssociation.setClientHandle (oimClient);
  tcDataProvider db = new tcDataBaseClient();

  .. .but I would get a java.sql.Connection (instead of tcDataProvider).

  Any suggestions?

  Thank you.

  All the remote APIs of the IOM are EJB3 services. A set of Java classes and Spring beans configuration is provided for each class of service. So, in order to have access to JDBC database, you will need to create a framework for EJB3, providing access to remotely all the data structures and methods, which of course is a rather difficult task.