How to get pictures from my camera to my Hp slate 7

Similar Questions

• How to import pictures from my camera to my computer

  How to import pictures from my sony digital camera to my computer

  Hi skootto58,

  Google may help, or it can take you in many directions different or bad.  I have actually used Bing to get to most of the links posted here - so it is obviously useful, but most of us are trying to be a bit more useful than answering questions (even if lack us critical information).  I have referred you to a more appropriate forum, but since I think I can help with the question, I'll answer anyway.  Next time, unless you think that the problem is caused by malware or MSE (which I doubt is the case here), a question like that should be displayed in the site appropriate in the main forum from here: http://answers.microsoft.com/en-us/windows/forum/hardware?page=1&tab=all&tm=1300700638376.

  I could be more specific, if I had the specific brand and model of the digital camera and the version of Windows you are using (for example, the SP2 32-bit Vista Business - Yes that much detail).  I don't know if your model has a USB transfer cable or if you remove the memory card and use a player to access the photos.  As it is, I can provide only generic information.  If it helps, it's fine.  If not, then provide this information and I'll try to find specific instructions.

  See the following article: http://www.ehow.com/how_5983411_import-pictures-camera.html.

  Here's a simple tutorial if you use Vista (and a camera with a USB connection): http://windows.microsoft.com/en-US/windows-vista/How-do-I-get-pictures-from-my-camera-to-my-computer.

  Here's a simple tutorial if you use Windows 7 (and a camera with a USB connection): http://windows.microsoft.com/en-US/windows7/How-do-I-get-pictures-from-my-camera-to-my-computer.

  This article deals with transfers of memory flash cards as well as in Windows 7: http://windows.microsoft.com/en-US/windows7/Working-with-digital-pictures.

  If using Vista and the problem is that AutoPlay is not enable, see the following set up: http://maximumpcguides.com/windows-vista/change-windows-vista-auto-play-options/.

  To be honest, I think the best bet is to go to the Sony support, enter information about your camera, and I think one of the most frequently asked questions for each of them is to know how to transfer pictures to a computer.  Click on that and you should get specific instructions (even though they may vary depending on your Windows operating system, but will probably provide details for the latest versions or they will be so similar that no additional detail is required).  Start here enter your camera model: http://esupport.sony.com/US/perl/select-system.pl?PRODTYPE=7&NAVDISP=di# and then just look for the instructions and follow them.

  If the above does not work, try to download the manual of your camera from here: http://esupport.sony.com/US/perl/select-system.pl?DIRECTOR=DOCS and there is an excellent chance it will cover transfers to computers in every detail.

  If that still doesn't work, try their technical support at: http://esupport.sony.com/US/perl/support-contacts.pl?mdltype_id=3233637171028026724455847427576110810910389103578487710629503964124158815260451017366768662546770682171881008225288369594924104537922424613105685336519473843437435.  There is a good chance that this may involve a cost if your camera is out of warranty. In any case, chances are that it will cost you are highest with phone average contact with chat contacts and the lowest with contact e-mail (just as the level and speed of charge often decreases the same way).

  If you can't get free technical support from Sony and don't want to pay for it (and I can't blame you for it), then try their Forums (like this but for Sony and products free to use) and ask your questions there. Start here: https://forum.sel.sony.com/viewforum.php?f=69&sid=7d46201819078b814c4a7095f972920b and check to see if your question is already answered - it can be.  If this isn't the case, post and wait.  They seem not very active so it may be a while before you get a useful answer.

  If any of the works above, answer the questions I asked earlier to identify what we deal with, and I'll try to find something a little more precise.  If you have tried to do so but have a certain type of problem, then please also go into detail about what has happened or not happened when you tried.  The system detects the device or memory card?  Be as specific and detailed as possible because more I know, the better I can help you.

  I hope this helps.

  Good luck!

• How to download pictures from the camera to a folder

  Camera is Olympus SP590UZ.

  Does not seem to be recognized by Vista when connected.

  How can I download images to a folder on the computer.

  (Must be in a folder for the edition of Photodex ProShow)

  Hi Sean,.

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it seems you are trying to download pictures from the camera to the computer.

  It would be great if you could answer this question in order to help you further.

  Do you receive an error message or error code?

  Refer to the steps in the following Microsoft article and check.

  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

  How can I get pictures from my camera to my computer? http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-get-pictures-from-my-camera-to-my-computer

  Keep us informed on the status of the issue.

  If you have suggestions/questions more related to Windows feel free to post and we will be happy to help you.

• How to get pictures from my phone to computer

  original title: pictchers of my phone on computer

  How can I get pictures from my phone and put it on my computer

  Hi richardosbaldeston,

  If your phone comes with a USB cable, you can use it to connect to your computer. Your computer should recognize the phone as a storage device. You should then be able to go to start > computer > devices with removable storage. Open the unit and access images. These are the General steps. For more specific measurements for your phone, display the brand and model of the phone or manual/website of the manufacturer.

• Can't get pictures from my camera into my computer

  I plugged the camera directly to my computer via a USB cable, and then turned on the camera and tried to get my pics on computer. But he has failed. A message came on my computer screen - one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  I tried to use another method that uses a memory card reader. I removed the SD card from my camera into my computer, but no AutoPlay dialog box came.  I clicked on the Start button, all programs, and then click Windows Photo Gallery. This is no work too.

  Please tell how to solve this problem step by step.

  Thank you

  Longpo

  I plugged the camera directly to my computer via a USB cable, and then turned on the camera and tried to get my pics on computer. But he has failed. A message came on my computer screen - one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  I tried to use another method that uses a memory card reader. I removed the SD card from my camera into my computer, but no AutoPlay dialog box came.  I clicked on the Start button, all programs, and then click Windows Photo Gallery. This is no work too.

  Please tell how to solve this problem step by step.

  Thank you

  Longpo

  ==========================================
  Download the files manually as follows:

  Apparently, you have an internal or external USB Media
  Reader?

  Insert the memory card into the correct location on the media
  Drive... If open windows... Close them.

  When the card is inserted... If you go to... Start / computer...
  the card reader is listed as one or more removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download the files from here. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the files of your choice in a folder on your hard drive
  drive.

  Just click with the right button on a group of selected files and choose... Copy...
  then navigate to the folder that you want and right click
  the folder and choose Paste.

  If you prefer to use autoplay... the following items may
  be worth a visit:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

• How to import pictures from my camera without re-import the olf ones

  When I try to import my new pic to my pic

  When I try to import my new pic to my pic

  =====================================
  I'm starting to think the identification of previously
  uploaded photos begins to falter when a high number
  photos are still on the memory card. May be a good
  idea to archive the photos elsewhere and less save
  pictures of the card.

  Here is a way to download the photos of choice...

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / computer... it can be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / computer... the media slots
  Drive should be listed under... "Removable disk" with a drive
  letter.)

• How to download pictures from the camera to the computer as no autoplay option is displayed?

  Separated from this thread.

  No AutoPlay dialog box appears

  Hello, Vivien.

  Welcome to Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. What is the number and model of your computer and the camera?
  2. All device drivers are updated?
  3. It worked before? If yes you did any recent changes (hardware or software) on your computer?

  Please refer to the suggestion provided by Shinmila: replied on March 28, 2010 in the following thread.

  AutoPlay does not not for digital camera

  Note: The discussion in the thread about Windows 7 but not hold good for Windows 8

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope it would help. If problem persists always post returns with the required information and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• PowerShot A40 cannot get pictures from the camera to my pc

  Canon powershot A40. PC not recognizing not not as portable device. tried to install the drivers that they do not load. Help?

  Hi crissac

  1. What is the exact error you get when you connect the device to the computer?

  2. what operating system is installed on the computer?
  3. the other USB devices is detected correctly?
  4. have you tried to connect to a different USB port?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can refer to the FAQ section mentioned in the link below and check if the steps help you connect the camera to the computer.

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a40?selectedName=ServiceAndSupport#ServiceAndSupport

  For assistance in obtaining the drivers or software, you can see below the link and check-

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a40#DriversAndSoftware

  I hope this helps.

• get pictures from my camera to my computer

  Hello. I connect my camera to the back of the tower and when I turn the camera on nothing happens

  Hello. I connect my camera to the back of the tower and when I turn the camera on nothing happens

  =================================================
  Reach... Start / my computer... and see if the camera is assigned a drive letter.

  If_Yes_ you can download pictures (copy/paste...drag/drop) here.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why can't I import pictures from my camera or printer more?

  Since the update to Windows 7, I can't import pictures from my camera or my printer to Windows Live Photo Gallery.

  The camera is a digital Fugifilm and printer HP Photosmart C4440.

  Since the update to Windows 7, I can't import pictures from my camera or my printer to Windows Live Photo Gallery.

  The camera is a digital Fugifilm and printer HP Photosmart C4440.

  ===========================================
  Maybe you could start the scanner and Camera Wizard manually:

  The executable for the scanner and Camera Wizard is:
  wiaacmgr.exe

  If you connect your camera via USB / light / and go to...
  Start / run... and type or copy / paste the following and press on...
  Enter... must start the wizard:

  (No Run dialog box?  The launch by typing... Windows Logo Key_R)

  C:\Windows\System32\wiaacmgr.exe
  (Should work on Windows XP / Vista / 7 / 8)

  OR...

  If you happen to have an external or internal USB media player
  Try the following steps.

  Insert the memory card into the correct location on the media player...
  If open windows... Close them.

  When the card is inserted... If you go to... Start / computer... is
  player card on one or several removable disks?

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download photos from there. Left click
  the drive letter that corresponds to the SD card slot should
  display the directory of the card and you can copy and paste or
  Drag and drop the photos of your choice in a folder on your hard drive
  drive.

  Just a select group of photos do a right-click and choose... Copy...
  then navigate to the folder that you want, and then right-click the
  folder and choose Paste.

  And the following link may be worth a visit:

  Windows 7 - working with the scanner and Camera Installation Wizard
  http://Windows.Microsoft.com/en-AU/Windows7/working-with-the-scanner-and-Camera-Installation-Wizard

  The following items may be worth a visit:

  Windows 7 - camera connection problems
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  Windows 7 - How to make photos from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  Windows 7 - install a device (camera)
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  And it may be interesting to try to adjust your AutoPlay settings.

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

• I transferred my pictures from the camera and they appear only in the last download and not events.  I tried everything, how can I get the events?

  I transferred my pictures from my camera to my mac, and they downloaded with the only place wherever they appear in "the last download" but not in "events".  I also downloaded on my macbook and had the same response.  I've never had this problem before and have tried everything.  How can I get them to appear in the "events"?  Since my last camera download, I have create a second library, but they are not more in the events.

  CTRL-click a picture on the last import, then select "Show event.  It shows the event?

• I can't download my pictures from my camera or from disk. I get an error code. Someone knows how to fix this? The error code is 0 x 80010108

  I can't download my pictures from my camera or from disk.
  I get an error code. Ox80010108
  Any help? Enjoy

  Hello

  1 when you download the pictures?

  I suggest that you put the computer to boot and then try to upload the image, follow step 1 to set the computer to boot.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

• How can I down load my pictures from my camera phone?

  How can I down load my pictures from my camera phone?

  nexteli686

  Look for the instructions of the manufacturer of the phone.

• When I download pictures from my camera they use to also downloan on easy Photo of Cannon. In my new computer, what they are not. I want what they. How?  Also how can I edit photos in Photoshop and 4 to print a page?

  When I download pictures from my camera they use to also downloan on easy Photo of Cannon. In my new computer, what they are not. I want what they. How?  Also how can I edit photos in Photoshop and 4 to print a page?

  donaldl93804616 wrote:

  Also how can I edit photos in Photoshop and 4 to print a page?

  Tell us more about what needs to be edited and where you have a problem.

  Print 4/page, go to Edition > Print > Picture package (#4 drop-down menu)

• Cannot download pictures from my camera or my backup quickbooks.

  I have recently switched to Verizon internet provider.   All my usb drivers have been updated, but since the passage of the AT & T to Verizon and reconnect my system I have not been able to download pictures from my camera or my Quickbooks backup.  When I try to save my quickbooks, I get a message that says that the G; ------drive is not available.  All solutions?  Thank you.

  Hi EugeneCurtis,

  ·         What exactly happens when you try to connect to the camera?

  ·         You receive an error message?

  ·         You are able to access the data of the camera?

  ·         What is G:\ drive?

  I suggest you to check if the device is recognized in disk management.

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

  To get help with QuickBooks question, you can contact QuickBooks support.

  http://support.QuickBooks.Intuit.com/support/articles/INF12565

  I hope this helps.