How to get rid of an error message?

Similar Questions

• Uncdms.dll is now redundant? How to get rid of the error message if so?

  I had to reinstall my Wndows XP Media Edition 2 or 3 times so far and the error message appears after each start that ' Windows XP cannot find the uncdms.dll file search, please reload '...» How, if it is not the responsibility of the backup first (and why not?)

  The platform of my system is Windows XP Media Edition SP 3 and is up to date.

  I'm sorry to hear your story of misfortune.  Indeed, you have been the unfortunate victim of a scam.

  I have actually seen reports of others who have had the missing uncdms.dll error still could not find Windows Search in Add/Remove programs.

  It is not clear what are your XP Media Center "backup disks.  You can use these to make a facility 'clean' of Windows (which involves formatting your drive) you probably should do.  Of course, you will need to back up all your data (documents, music, photos, etc.) and reinstall applications that were not pre-installed.

  Given the history with the applications 'security' and 'Speed Up' (for not to mention being "riddled with viruses"), this is one of those cases where a format and re - install of Windows is certainly justified.

  I suspect that, however, that all these discs are, they don't let you do a "clean install".  If they did, you would not have seen the persistent uncdms.dll error.

  You have a few ways to get the computer to its State 'cost-of-the-factory '?

  So... instead of doing a format and a clean install, I see three possible approaches to get rid of the error uncdms.dll:

  1. open Add / Remove programs then check the box at the top to 'See the updates'.  It is possible that Windows Search is classified as a Windows "update" and will show when these normally hidden entries.

  2. download Windows Search using the link in my previous post and install it.  Because I've never used Windows Search, I don't know if it will install properly in your case.  Malke, which I'm sure expertise said to uninstall before reinstalling, but you can't do that.  If it installs correctly the error message will disappear and (b) you will probably be able to uninstall.

  3. download, install and run Autoruns.  This utility shows practically all items that start at Windows startup.  But for the fact that uncdms.dll is known to be associated with Windows Search, this is the solution I would have proposed first.

  After Autoruns has finished its scan (it will say "Ready" in the lower left corner), click the 'Connection' tab and look for an entry that is associated with Windows Search.  If you do not see Windows Search, look for uncdms.dll in the right column.  If you cannot find either of these items, click the "all" tab and use the search tool on the file menu to search for these terms.

  If you find an entry for Windows Search and/or uncdms.dll, uncheck the box at the left end of the line.  This will prevent the point of trying to start at Windows startup and will make the error to go away.

  For question 2, the short answer is no.  Uninstall the "Windows security provision.

  For question 3, you must provide the full error message.  In addition, please identify which application you are currently using as an antivirus, and if his "subscription" is up-to-date.  You use other antimalware applications?

• How can I get rid of the error message % APPADATA %

  original title: how CAN I get RID OF THE error MESSAGE % APPADATA %

  Please can someone help me get rid of the error message '% APPADATA '.

  Hi jmlMoh'ed,.

  Exactly when you receive this error message?

  If it is a mistake to start, I you suggest trying to set up the machine in a clean boot state and then install the update.  Follow the given article to set up the machine in a clean boot state.

  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• How can I get rid of the error message error "jre terminated unexpectedly" at first upward?

  How can I get rid of the error message error "jre terminated unexpectedly" at first upward?

  [Moved from comments]

  Hello

  Re: Java... You should do some research and decide. I disabled the add-on modules. Many would say that this is not enough.

  Here is an article good start:

  Java security hole: so forth and so | Articles from Computerworld:
  http://blogs.Computerworld.com/cybercrime-and-hacking/20921/Java-security-flaw-yada-yada-yada

  Search terms such as 'java vulnerability","java security"and" disable java "will return useful information.

  Don

• Smartphones from blackBerry Desktop Manager "disconnected" and I cannot get rid of the error message

  I just bought a Blackberry Curve 8530, running v5 software, my computer is Windows 7. I installed the 501_b073_multilanguage software that I downloaded from the site Web of Blackberry. When I run the Desktop Manager I get this message: "Before you start, check that your current BlackBerry device is connected to your computer." Troubleshooting functions I've seen on this forum: many tips (ones I've tried is below). One in particular, that I can't do is "Office Manager shows"off". ".
  -Make sure that the user has entered in the Desktop Manager and select options > connection settings > detect. »

  ... because I can't get rid of the error message dialoge box, and I can't click on the menu options in the BB Desktop Manager.

  I tried the following:

  • uninstalled and reinstalled twice - 2nd uninstall was a "hard" uninstall where I deleted the registry files by hand
  • installs the cable to the USB port at the back (after having tried both ports at the front) of the computer
  • rebooted the computer several times
  • hard starts the phone by removing the battery
  • plugged in, removed and replugged in the phone.

  Also:

  • The phone is properly install when I plug it in, but the software still does not seem to see it.
  • In Device Manager, the BlackBerry appears under portable devices. Double clicking on it gives me the message "this device is working properly." of reassurring.
  • The Com1 port is working properly, according to Device Manager.
  • A double-click on the icon of the Device Manager to get the properties indicates that the Com1 port is "disconnected" - when I try to set it up, it appears just back to the disconnected state.

  If someone has an idea or something that I have not tried, I'd be happy of course!

  Thank you!

  K

  

  

  Good, people, after a phone call from 3 1/2 hour with a (very patient) phone support person to Blackberry, here's what I learned.

  You can check your drivers USB in this way:

  1. Plug your phone into your USB key. Assuming that your Blackberry is "seen" by your computer...
  2. Go into the Device Manager on your computer (Panel)
  3. Expand the Universal Serial Bus controllers at the bottom of the list item
  4. Right-click on the BlackBerry smartphone, and then select Properties
  5. Click on the driver tab
  6. Click the driver Details button
  7. You should see a driver. I saw two. The one like the BlackBerry is the RimUsb one.

  So here's what NOT to do: we threw any driver who has been the "extra". This actually made using my mouse and keyboard cannot, because they are USB and my poor husband has sent in the basement to find a million-year-old keyboard (and mouse) with the old fashioned type of connectors (PS2). Bleh. Don't, don't.

  Here's what I did that worked (not saything this will work for you - it changes the registry to a backup system with this backup and restore if you are nervous about this kind of thing):

  1. On the start menu, choose run and type regedit into the registry editor.
  2. Follow this path to the file: HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, computer, class
  3. Click: {36FCE60-C465-11CF-8056-4445535400000}
  4. If there is an article called law "UpperFilters", delete it. (See photos)

  Hope this helps someone.

  Karin

  First photo: Watch 'before '.

  

  Second picture: displays the full path of the file and 'after '.

  

• I get this message "new virus detected" but my computer is completely protected.how I get rid of this constant message against spyware 2011?

  I'm getting this reminder "new virus found" by spyware, but my computer is completely protected.how I get rid of this constant reminder?

  Hello

  you are infected with malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• "Sonic focus... pilots." "How can I get rid of the error message?

  Whenever my system going through startup or reboot, I get an error message, "Sonic focus drivers must be...". »

  How can I stop this. 8 months ago I reinstalled my OS (XP) and I got this doomed message since then.

  Hello

  Download and run Microsoft Safety scanner and check if this may help:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  It will be useful.

• windows error code live mail 0 x 2011 80070057 unsent messages in your Outbox cannot send email. How can I solve this problem and get rid of this error message.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Problems with Windows Live, ask Windows Live experts.

  Here: http://www.windowslivehelp.com/

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• Firefox said I'm not on the latest version, but I am. How to get rid of this annoying message?

  When I open Firefox 8.0.1, my homepage is: http://www.google.co.uk/firefox?client=firefox-a & rlz = 1R0WZPB_en-GB
  I get a message in the Google search box that says:
  You are not on the latest version of Firefox. Update today to get the best of the Web!
  When I click Help - about Firefox and search for updates, it says that I'm on the latest copy.
  How can I get rid of this message, or is it a question for Google?

  Firefox start pages hosted by Google used to be the default home page in Firefox before Firefox 4.0.

  Google keeps it no more so either ignore the message or change your homepage. If you want a single search page then use the topic: Home as your homepage.

  Tools-> Options-> general-> home page where you can change it.

• Receive a BackgroundContainer error when you start, how to get rid of this error

  Original title: error BackgroundContainer at startup

  I get the error message "c:\users\Ernest\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll" to start. He began to appear after I ran my malware software. I read the suggestions to find the container background task in the task schedular library folder and delete it, but... I can't find something called the background container any where in one or its subfolders. Can someone tell me please more precisely where to find this? I am running windows 8.1 thank you.

  See the following: http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/windows-81-start-up-problem/da34bdc9-1d29-4233-8353-aa1846457c0bThis is thread refers to a problem with Windows 8.1 but the "fix" applies to Windows Vista, Windows 7 or Win 8

  Or

  Check out this free Malwaretips removal guide: http://malwaretips.com/blogs/backgroundcontainer-dll-virus-removal/

• How to get rid of "Web Page Message" indicating the object does not support this property or method.

  After I log on my computer, I get the following pop up message "Message on the Web Page" - "object does not support this property or method." He continues to pop everytime I try to do something

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• I get a message by signing in iCloud iMac found elsewhere. How can I change the location? How can I get rid of this error message? I allow access from somewhere else (weird)?

  I have iMac OS X version 10.7.5. When you try to connect to my iCloud (I pay for a minimum monthly access), I get the message that my computer is requesting access to iCloud somewhere else. I allow access to this strange place? How can I change my location on the desktop to my address? How can I get my iCloud account?

  Is introduced on the market, two-factor authentication because if this is the case, you will have what is normal - for Apple ID - Apple Support two-factor authentication

• I searched on "ev handl" and found three questions about the problem I have. I don't see an answer. I use windows 7 with the latest update of firefox. How can I get rid of the error message?

  When you open windows in Fire Fox, I receive a message from the Application of Java Script. "Exc in ev handl: error: oSAPlg.oRoot.log is not a function".
  I have Windows 7

  Your post is a little different, but very similar to another message and it includes "SA" in the message, so I mean...

  Best solution seems to be to uninstall Site Advisor system and then to reinstall again www.siteadvisor.com as shown in https://community.mcafee.com/message/203466

  See also http://kb.mozillazine.org/Problematic_extensions regarding McAfee Site Advisor 3.4.0 for more specific instructions.

• How can I get rid of this error message?

  "I downloaded the latest version of firefox and receive this java script" error: expose the privilege or cross-origin callable is prohibited "whenever I load a new page on the web.

  Hello benkunin, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you

• How to get rid of the Original message loaded

  Hello

  Can someone help me solve the following problem with my HP Photosmart C6180 All in;

  Some how I managed to get a message on the printer screen saying "Original charge."

  I turned the printer off, entered the menu copy, but can't find anyway to delete. As it became clear that I can't use the copy machine, it makes a noise and produces a blank page.

  Thank you for taking the time to read this and all advice will be appreciated.

  Kevin

  Check the paper sensor in the ADF (automatic document feeder):

  Figure 2: Lift the scanner