How to get right left/filling filling at work?
I work in Premiere Pro CS4.
I have a video clip with an attached stereo audio track. The left has its channel, is not the case of the straight path. (I see this waveform of the element in the timeline panel.) I would like to copy the sound of the left channel to the right channel so the two audio channels.
To do this, I opened the effects window and dragged the Audio effects - stereo - effect left fill to the clip. But nothing happened. I can't get the right do anything either.
What I am doing wrong? Is there a rendering command that is needed to make this effect works properly?
Way to go nuts with this... Thanks for your help.
HM - m, from your description, filling left should be just what you want. What are the specifications. your Audio file?
Good luck
Hunt
Tags: Premiere
Similar Questions
-
How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?
How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?
Is 8.3 typo?
After which update exactly?
-
I tried switch off nothing firewall, as a first step, the arrow is green then turns red more suggestions on how towing get bit torrent w7.2.1 work?
Hello
I would say to contact Bit Torrent site to better support this problem to technical support:
http://www.BitTorrent.com/help
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
How to get Ubuntu 11 unit interface to work in VMWare Workstation
I can't get the new Ubuntu Unity 11 work in VMWare Workstation interface. Any help would be appreciated.
I'm running the virtual machine with 2 GB of RAM, 2 processors and 3D graphic acceleration. I think that it is a more powerful configuration than an old laptop on which I easily got the work unit.
It still works, whenever Ubuntu starts, Gnome rather than unity. This happens even if I have, that he set up on the logon screen to run Ubuntu (which is Unity) instead of Gnome.
It's hard to find since VMWare also uses the term of the unit. Please be clear that I am wondering about the new Unity of Ubuntu 11 interface, NOT interface of the VMWare unit.
VMware does not support what is needed to make it work in 3D and the only choice I've seen is to use unity 2D
In a Terminal:
sudo apt-get install unity-2d-default-settings
See also:
How to install unity 2D (Qt) in Ubuntu 11.04 / 10.10 ~ Web Upd8 ...
Unity 2D is available as an Option in Ubuntu 11.04 Natty Narwhal
-
New to Livecycle - I can't figure out how to get my Add/Remove buttons to work
Hi, I took a course intro Livecycle of work and now I'm supposed to create all these new forms in Livecycle. I have tried to teach me but am a complete road block on how to get my line Add/Remove buttons to work. I have script them and I think that the first row of the table must be in a subform for them to work? but I can't do it all...
Any help would be much appreciated
Hello
There is here an example that leads you through the steps of construction of the dynamic tables: http://assure.ly/gk8Q7a.
If you use the table object, you don't need to wrap in a subform. If you select the rank in the hierarchy, you can go to object > Binding palette and assign Repeatable.
The other question is to ensure that the form is saved in a dynamic form of XML in the Save - as dialog box.
Hope that helps,
Niall
-
How to get right to downgrade to Windows Server 2008, if I buy window 2012 license
We need to buy Windows Server 2008 Enterprise X 64 Edition, unfortunately, is not available although wanted to confirm which edition of Windows Server 2012 devrais I buy to get the edition of Windows Server 2008 Enterprise X 64 Edition downgrade but I found the information in your FAQ document, mentioned in Q15 I have to buy Windows Server 2012 Standard for Windows Server 2008 EnterpriseQ15. If I want to use the bits from a previous version or edition, what are my options?
If you have Windows Server Datacenter edition 2012, you will have the right to downgrade your bits any earlier version or lower edition. If you have Windows Server 2012 Standard edition, you have the right to downgrade your forests to any previous version of Enterprise, Standard or Essentials editions.
The ability to execute downgrade bits do not change licensing or support the terms in which you use the product; rights of the purchased product (Windows Server 2012) will apply. This means that the license will continue to wear two physical processors and virtualization of the rights do not change.
Here are a few examples. License purchased
Downgraded version or edition
ILO rights that apply
License fees that apply
Data Center 2012
Datacenter 2008
Datacenter 2008
Datacenter 20121
Standard 2012
Enterprise 2008 R2
Enterprise 2008 R2
20121,2 standard
Standard 2012
2008 standard
2008 standard
20121,2 standard
Standard 2012
Essentials 2012
Essentials 2012
20121,2 standard
Awaiting response ASAP
Hi Ibrahim has,
I suggest you according to the question in the TechNet Windows Server 2012 Forum: http://social.technet.microsoft.com/Forums/en-US/winserver8gen/threads
Thank you.
-
How to make a form fill-able work on mobile phone?
Hello. Is someone can you please tell me what I need to do for my form PDF (fill-able) to work on my mobile phone (Android)? The Send button does not work/react when I press on it. I can not type anything in the textfields either. The form works on a computer, but not on my laptop. What I have to export in a specific way...? (The form is a form to fill out).
You can not. If the PDF Viewer they use is not sufficient support for forms, there is nothing you can do.
-
Look and feel (LAF) project: how to get a left button tag justified?
Salvation (François)
We have implemented the appearance code and would like to have transparent with just the label watch buttons (so that the buttons look like a list on the screen).
It works perfectly except the labels buttons are always centered and I can't seem to left-aligned. The justification is the Ok if we use a circle or a diamond, but not with the text (ie: using the DrawText function). Is there a way to do this?
IE using:
Set_Custom_Property (pvc_mat_attribute | pi_mga_seq_no, 1, 'SET_TEXT_POSITION', 'left');
Set_Custom_Property (pvc_mat_attribute | pi_mga_seq_no, 1, "SET_TEXT', 'Some Text');
Thank you
SteveNow, version 1.3.6 is released.
François
-
all sets of headphones are only receive the right left sound doesn't work-headphones only
my headphones are plugged into the computer before taking and I get only sound right, and I tried three sets of headphones
Go to the mixer and make sure that the balance is equal to the left and right signals.
Also do this for any software, you can use that built into the mixer.
See you soon,.
Jerry -
Tecra A9: How I get saved keys FN-esse to work all the time?
How can I get my saved keys FN-esse to work all the time?
It is without having to use the Toshiba Assist button to bring up the Fn-esse chart on my desk?
Hi Cameillia
Please excuse my question, but what do you do exactly?
You want to use the FN + F1 - F9 button functionality without using the FN key?Sorry, but I think that it is not possible
But if you use Vista OS, then you can use the mouse cursor and might point up, display area and could activate the Vista FlashCards.
The FlashCards support the same functionality as the use of the keys FN + F1 - F9Concerning
-
How to get windows 95 PC games to work with windows 7?
How can I get a game called star wars the phantom menace for PC windows 95 work on my PC whitch is windows 7?
You can try compatibility mode. http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
Also have you tried to install just, can work, may not.
MCP. MCDST. LVL 80
-
I changed my google chrome browser and I finally got my confiquered pc and printer. He is an all-in-one 2840 color laser jet. How do I get the scan and fax utilities to perform?
It is useful to include the manufacturer and model number.
What version of Windows you have, including the service pack?
How the device is connected to your computer (USB, Ethernet, other)?
Have you installed the software that came with your HP Color LaserJet 2840 AiO printer?
If not, why? If you did, what error messages you are seeing? Please report messages completely, without paraphrasing.
Start here: HP Color LaserJet 2820 and 2840 AiO products Series - first installation and install
-
WRT120N - how to get static IP and DHCP to work together
I have a few features on my net that must be static and other who work best as dynamic dhcp provided. How to configure the router to never give a static IP dhcp, preferably even IP addresses if the static IP device is OFF right now? It would be almost impossible to have everything static (cell phones, visitors, and al.)
Static IP addresses must always be outside the general DHCP server address pool. On a Linksys router with the default settings for the DHCP server, assign static IP addresses outside 192.168.1.100 - 149.
-
How to get HP PSC 2355 wireless connection work.
Wireless HP PSC 2355 does not connect. It worked initially when it is installed a few months ago. Have not used the printer for a few months. Now the wireless connection is not displayed.
How can I get the wireless to start working again? I use another network, then I used initially.
First, reset the printer:
You can restore the original settings to what they were when you bought your HP all-in-one device. Note to restore the default settings affect all changes made to analyze the settings and the country/region and language settings. You can perform this process from the control panel only.
1. press Setup.
2. press 3, then press again 3.
This displays the Tools menu and then select Restore Factory Defaults. The default settings are restored.
Then download the latest version of the software for your printer from the "Support & drivers" link at the top of this page. Run the software and choose 'Wireless' or 'network' when asked what type of installation you want. Make sure that the USB cable is NOT connected when you start the software.
-
How to get my creative cloud subscription to work on my new computer?
I got a new computer. An old crashed. Have been subscribing to creative cloud on the annual plan for several years. How can I get my apps on my new computer?
Hello
According to the EULA, you can install creative cloud on two computers.
Please see the link below for the installation.
Download and install Adobe Creative Cloud apps
Hope this will help you.
Kind regards
Hervé Khare
Maybe you are looking for
-
Can I sell Windows 2000 NT OEM?
I have an OEM windows 2000nt original full version factory. Did not come with a system. I want to sell. I can?
-
I have already addressed this problem on the forum once before and received an answer telling me to change my password, I have already done. Tonight I received complaints from two of my friends who received messages today. These emails are send to ev
-
Windows 7 can't install a program or an update.
own, I installed win 7. Since then, I am unable to install any software. I inserted the cd for my hp printer, but ot froze in the middle of the installation process, so I'm unable to print from it. I download the software of the printer on the net, b
-
I can't create an account eprint. I get the 403 - forbidden error message.
Printer office Jet 6700 for HP Inspiron 1764 Windows 7 error message: 403 Forbidden Installed the new printer Officejet 6700 02/06/2012; creating an account eprintcenter but get the 403 - forbidden error message. Unable to create an account.
-
My printer does not work after the upgrade of win8. This is not acceptable. I'm in a printing plant