How to get tickets Rehost Cisco CASE?

Similar Questions

• How to get tickets Kebores initializtion via VPN

  How to get the ticket of Kebores initializtion via the VPN for Single Sign on

  Hello

  The question you have posted is related to a virtual private network and would be better suited to the TechNet community.
  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  I hope this helps.

• How to get Windows XP in case of hard disk crash

  Hi, recently my hard drive got crashed and I lost my original Windows XP that came with my laptop pre-installed. I still have the key of Windows XP with me and I'm the only owner. Is their anyway to get it from Microsoft without any extra cost. Please let me know at * address email is removed from the privacy *.

  on laptops, operating system installation files are located on the hard disk, in a hidden place.

  These installation files can be launched / executed via a procedure known as 'factory restore '.

  a factory restore is then wipe the hard drive and install a fresh copy of the operating system of the manufacturer.

  Depending on the type of 'crash' you committed, you might be able to run a factory restore, but you will lose all your personal files too in the process.

  If the hard disk is still inside the laptop, then go into your mobile home site and look for the model number for instructions on performing a factory restore.

  either way, a hard drive crash is subjective interpretation.

  You may be able to fix it if you can borrow and xp cd from someone "or" via a startup disk that you can do on the internet.

  However, you will need to provide more information on your "crash."

• Cisco ASA5520 facing ISP with private IP address. How to get the IPSec VPN through the internet?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hello guys,.

  I have Cisco ASA5520 facing the ISP with private IP address. We don't have a router and how to get the IPSec VPN through the internet?

  The question statement not the interface pointing to ISP isn't IP address private and inside as well.

  Firewall configuration:

  Firewall outside interface Gi0 10.0.1.2 > ISP 10.0.1.1 with security-level 0

  Firewall inside the interface Ethernet0 192.168.1.1 > LAN switch 192.168.1.2 with security-level 100

  I have public IP block 199.9.9.1/28

  How can I use the public IP address to create the IPSec VPN tunnel between two sites across the internet?

  can I assign a public IP address on the Gig1 inside the interface with the security level of 100 and how to apply inside to carry on this interface?

  If I configure > firewall inside of the item in gi1 interface ip address 199.9.9.1/28 with security-level 100. How to make a safe lane VPN through this interface on the internet?

  I'm used to the public IP address allocation to the interface outside of the firewall and private inside the interface IP address.

  Please help with configuration examples and advise.

  Thank you

  Eric

  Unfortunately, you can only complete the VPN connection on the interface the VPN connection source, in your case the external interface.

  3 options:

  (1) connect a router in front of the ASA and assign your public ip address to the ASA outside interface.

  OR /.

  (2) If your ISP can perform static translation of 1 to 1, then you can always finish the VPN on the external interface and ask your provider what is the static ip address assigned to your ASA out of the IP (10.0.1.2) - this will launch the VPN of bidirectionally

  OR /.

  (3) If your ISP performs PAT (dynamic NAT), then you can only start the tunnel VPN on the side of the ASA and the other end of the tunnel must be configured to allow VPN LAN-to-LAN dynamics.

• How to get down the database since the failure of the upgrade in case of physical standby

  Hi people,

  Can you please tell me how to get down the has no upgrade in case of physical standby database?

  Kind regards

  Taoqir

  The generic steps to upgrade db at the dg environment

  1. stop the database pending the application of recovery logs

  2. stop the recovery of his expedition logs

  3. upgrade the primary database server executable files

  4 level database server executable files shall ensure that

  5. switch to the main database using DBUA or upgrade scripts

  6 mount the backup database

  7 reactivate shipping again Eve elementary school

  8 restart the recovery process run on the standby database again progress apply

• How to get the 6th element of a C.V. value column

  Hi all

  I use Oracle Business Intelligence 11.1.1.7.131017.

  I have a column with the following formula: C.V. ("Tickets". "Number of tickets"), but since we want to only show the values advocated by the past 6 months and which is an accumulative column, we added the rank function in the filter and placed as: grade (C.V. ("Tickets". " Number of tickets')) < = 6 and for the final formula, we need the minimum value that is placed in 6th place...

  My problem is how to get the value assigned to this position?

  Here's the column values:

  30719 (value I pretend-> min)

  31357

  32025

  32595

  33652

  34616 (I also use this value-> max)

  Any idea on how to get the value placed on tier 6?

  Thanks for the help and have a good week.

  Kind regards

  Frederico.

  I found a solution (poor, but it works)...

  As a minimum I want is always located in the row = 6 I put a case when row = 6, then returns the value I'm pretending, else return 0, so after that I need only the max of all values, as they are 0 or the value that I'm pretending, like this:

  MAX (CASE WHEN (GRADE (C.V. ("Tickets". "Number of tickets')) = 6) THEN of C.V. (FILTER ("Tickets"." Number of tickets' using 'status '. ((("" Resolved "="Resolvido")) END ELSE 0)

  I want to thank you all for the help, normally I post in the forum of the ADF but its good to know I can get a lot of support here as well...

  Many thanks to all,

  Frederico.

• How to get the second line in an indented bulleted list...

  Hello

  I understand how to get flea and list numbering, and I added numbers to a list that will be used (although the content will be replaced) on about a hundred pages of my cookbook.  Many numbered tickets are just a single line, but some entries are two or three lines, and in these cases, the text begins on the left directly under the number on it - I prefer the second and third lines of text to start directly under the text in the above numbered line.  In which case I'm not explain correctly, here is a small screenshot (it comes through hope):

  

  Did someone mind telling me how to solve this problem?

  Thank you very much

  Malcolm

  Can you show a screenshot with the same panels open screen I've had, and the selected numbered text?

  Also, I should have mentioned that to move just down half of the arrow on the tab of the Panel, you must hold down the SHIFT key at the same time.

• Each new tab includes search Secure AV - how to get rid of him?

  Each new tab includes search Secure AV - how to get rid of him?

  Type of topic: addons< enter > in the address bar to open your add-ons Manager.
  Access key; < Control >(Mac: < command >)< shift > has)

  In the Manager of Add-ons, on the left, select Extensions. Remove AVG
  Whatever it is. Now do the same in the case computer programs.

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux: See your user manual.

• New to Thunderbird, &amp; my 'projects' and 'Sent' folders disappeared (NOT in the folder delete) - how I get back them?

  When I started using Thunderbird, created automatically to the Inbox, drafts, sent, and deleted files. Now I have that Inbox and deleted as the currents of air and sent are no longer displayed. They don't seem to be in the folder deleted, no more.

  Suggestions on how to get to see my project items and sent?

  I'm guessing that your account is IMAP and the original folders were eventually replaced by those synced from the server. It may be that they were finally populated with mail. Thunderbird tends to show only records after they serve the projects, releases etc.

  The click of the future, not the account in the folders pane and choose Subscribe all folders should disappear.

  Also
  Right-click the account still once, select settings.
  Select the server settings and the Advanced button. Enable or disable the "show only subscribed folders" (in the case of yahoo, there is a yconversations file that is displayed if the option is disabled)

• How to get around a fake "cannot read itunes library.itl?

  I have a Windows 7 laptop I want to back up the same on a Windows laptop 8.  Should I bring all the files on the Windows 7 laptop to Windows 8 laptop computer including my music/itunes and program/itunes files.  It has worked for years.  All of a sudden I get a message when you go to itunes on the laptop computer of Windows 8 that say 'cannot read itunes library.itl because it was created by a different version.'  This is different from the case referred to the support forum where people want to deliberately use an earlier version of itunes.  I want to use on the laptop Windows 7 and Windows 8 for the latest version of itune laptop.  To make sure that I have request for updates on two laptops from itunes and received responses that I already have the latest version installed on two laptops.  I can access itunes on the Windows 7 laptop, but not Windows Mobile, 8.  How to get around this indication false error on my laptop Windows 8?   I have the latest version and the itunes and all files have been created using the most recent version.

  You have identical versions of iTunes on both machines?  The two latest updates of iTunes (12.3.3, 12.4.0) have included both updates of database for the latest library files can only be read by older versions.

  How are you "Portage" your library data?  The error message may indicate a corrupt library file.

  Also note that you should not try to replicate the folder iTunes program between computers - there is a high risk that the results will be unpredictable, especially since you're moving between two different editions of Windows.  There is really no need to do this - there is no data stored within the hierarchy of program files, who wanted to be replicated on several PC.

• How to get the card working on Tecra M1 WLAN?

  I just bought a 2nd hand Tecra M1. Great! It has installed XP but no Toshiba tool. I can't access my WLAN router. Seems like if WIFI connection is not yet installed. As I know from my Satellite Pro M30, there are Toshiba tools for this, they work smarter.

  Maybe I need drivers - WXP is material unknown when starting up - might be the WLAN device - who knows.
  When I check the network connections, I find 1934 and LAN adapter, but no WLAN device. I have already run the XP Wizard for WLAN connections, SSID and hexagonal key; but no WLAN device presents itself.

  Then, someone a idea how to get the job of WLAN?
  Is it possible to get the Toshiba M1 software or can I use my software SatPro?

  Thank you Jan so far

  It's good that you will find yourself, I think most of us would point on your ad when you have users with a similar problem. Sometimes it s really useful to have users like you who will investigate their cases.

  I'm now long enough a Member here, but every time I have met people who have solved problems like that, then I must say how much I appreciate it. :)

  Welcome and good weekend

• Satellite L500 - how to get the keys FN works on Windows 7 64 bit?

  Hello

  I need to reinstall Windows 7 on a Satellite L500, but I can't get the FN keys to work. Someone here would be able to give ideas on how to get this to work?

  Case No.

  Hello

  It's pretty easy. Go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and download the utility of Vap and Flashcard support. Then, install Vap and restart your laptop. After that do it for the support of Flashcard.

• Satellite M30X: Motherboard is dead - how to get a cheaper solution

  Hello world.

  Two days ago, I turned off my satellite m30x in the evening. The next morning, when I tried to turn it on, the fan was running and audible. After that nothing more happened. No access to the hard drive, no activity of DVD. Nothing.

  Giving the laptop to a local dealer, he had the same opinion I got first-> Mainboardproblem.

  Asking a Toshiba dealer for a new Mainboard for my system came to the conclusion, that it is cheaper to buy a new laptop than the repair of it.

  I decided to take a look on ebay first, and would'nt believe my eyes, I saw, that 3 out of 4 offered M30x had the same trouble that my only.
  Anyway, since my only is no longer usable, anyone of you have an idea how to get a less expensive solution, since there is no guarantee more?

  Thank you very much.

  You have some many possibilities.
  You sell this M30X and add a difference to buy a new or a second or you buy a new------card mother second hand to repair the laptop.

  Maybe you are a lucky man and find a cheap compatible MB. If this is not the case, well well maybe you know an electronics in the city of you who could fix this Board.
  But I think that it of not easy to fix this motherboard with no additional experience.

  concerning

• How to get TS::SequenceContextPtr to customize the user interface

  I want the file of the custom, user interface sequence value therefore need to take stock of the TS:equenceContextPtr, anyone know how to get this point.

  Is there a reason that UIMessages are not enough?

  Just off the top of my head, here are a few concerns with the not not using UIMessages:

  1. How the user interface is unknown when the file of the sequence is developed to set the value.  Without an event or some sort of synchronization you can do exactly that.  UIMessages not only to ensure the right information, but they help also with synchronization.
  
  
  2. The engine does not know this information, and view of execution manager knows that the information for the current execution it is linked to (which changes throughout the life of a series of tests).  Basically, recall of front end, model, and other factors may spawn short executions briefly related to the Manager view of execution.  So if you take the context of the sequence of the current run is perhaps not the right one.
  
  
  3. Writing a user interface will be couple the user interface to your specific sequence file.  At this point, you can use the network variables or global variables or global queues as well.  It might even be better options.

  The situation you describe is exactly why the UIMessages were created.  Maybe you can help me understand why you are set on the use of pointers, you already have?  There might be a better solution for your case if I'm misunderstanding you.

  Thank you

• Application Builder-how to get rid of the savings going to project after generation?

  Hello

  I'm using LabView to project continuous integration with Jenkins. I have a vi that runs test cases is build of the project, then bed information on the results of Jenkins.

  After a success, there is a warning that I have unsaved changes in the project that I wanted to build. This message is to close labview and jenkins of the display of the results

  Here I found information about this warning at the first "Note".

  http://FTP.datx.com/public/DataAcq/LV-link/LVLinkWebHelp/Building_and_Distributing_an_Application.ht...

  How to get rid of this warning, or save changes automatically, so that I don't have to click 'Save' after each generation?

  Thank you

  Karol

  First of all, you don't want to get rid of this warning. It is this backup which makes the work number version auto-incrémentées. LV has to save the new version number in the project.

  Yes, you can make a backup. Somewhere, to do the code LV, who runs a program generation. At the end of this process, you need to save the project. There is a method to do project.

  I wrote a small program for me to open a project, perform the selected builds and copy the installer resulting in a USB key.

  Mike...