How to get the card working on Tecra M1 WLAN?

Similar Questions

• How to get LAn card work on my Satellite Pro A40?

  Hello

  I have a laptop Satellite Pro A40 series.
  My problem, I can not work LAN then I didn't install any network card.
  I try to get the Toshiba Web page LAN driver, but I have not found any exe installation inside.

  All files are installation information files and a few dll files a file any din and a Readme file reading and a uninstall files but no configuration.

  Can someone tell me how I can get my network to work please?
  Thank you very much
  Zoltan

  It is very easy.
  Download the LAN driver and run the files in the new folder created on your desktop. Go in Device Manager, and then open properties LAN card. You will find the option to install the driver. Follow the on-screen menu and navigate to this folder.

  All that s!
  Please try it out.

• How to get the opening working on El capitan

  This weekend I finally upgrade my MBP Lion to El Capitan.

  After that opening upgrade did not work. I remembered, there was a problem opening running on Yosemite and wanted to migrate to lightroom, maybe, but I have not had the time yet and already have hundreds of gigabytes of photos in Aperture.

  A magazine suggested to remove the opening of disc and reinstall via the App store to get the latest version that works apparently under El Capitan.

  Who did not work for me - I could not find in the App store opening. I initially bought Aperture for $200 on DVD, without going through app store.

  How can I get the latest version of aperture, so I can update my OS now and migrate from aperture far later?

  Probably not now - you must open 3.6 - maybe this will help you but I suspect that the time is over to get it - update to Aperture 3.6 after the release of Photos

  LN

• How to get the ripple working, config.xml is not found

  Here a load of resources for getting started, but I just can't get anything to work as stated in the documentation, or the youtube video shows.

  I have various things installed, NodeJS, JVM, BlackBerry WebWorks 2.0.0.71, ripple in Chrome.

  To begin with when you use 'create cordova' layer of the project is different, cordova 3.4.0 I get:

  hooks /...

  mergers /...

  config. XML

  www/js /...

  www/img /...

  www/css /...

  www/index.html

  But information to addresses such as https://developer.blackberry.com/bbos/html5/documentation/creating_hello_world.html don't show this provision.

  I'm supprised when I open the config.xml file in Chrome that it does not detect the XML XSD and ripple offers to launch itself.  If I navigate to file:///C:/Users/Username/RippleSites/myproject/ www/index.html can activate ripple but she complains the file config.xml in lack.  Services of ripple Start' provides no clue as to any error and no TCP server listening on port 9910.

  I guess BB10 doesn't work with a specific version of cordova, which uses a different type of layout of project that one 3.4.x uses.  How can I fix the environment to use the correct versions and also automatically prevent the upgrade within this environment?  Because I want to obviously NPM allows management version of the future module updates.

  How C:\Users\Username\WebWorks Project\project interacts with the ripple need to use a specific home project directory as well?

  See the Option #1 here for more information about enabling access to the local files for Chrome/ripple:
  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/solution-ripple-launch-is-INTERR...

  That being said, the that training has been designed to be an emulator for the WebWorks 1.0 SDK, it relies on the features that have changed in WebWorks 2.0. For example, we leverage is no longer webworks.js, but cordova.js and webworksready changed to deviceready. In the end, there may be still some differences in the APIs, if efforts have been made to minimize any impact as he.

  BlackBerry 10 works with Cordova 3.1.0 and above (it may have been a few versions ago, but I don't remember exactly). Stay up to date with Cordova and use the latest version through the Museum is my personal recommendation.

  Note that if you use Cordova, you also need to install the NDK BlackBerry properly configure your environment variables.

  Note that the link to the above documentation referred BBOS, which is the platform of the inheritance (BBOS 5, 6, 7). BlackBerry 10 documentation can be found here:
  http://developer.BlackBerry.com/HTML5/documentation/V2_0/

  The www folder is root of your project that will contain all the files of HTML5. The other files are related to Cordoba and used for packing and manage your application is built.

• How to get the plugin working in Adobe Muse Unity3D

  Hello

  I'm trying to migrate my site from Dreamweaver at Adobe Muse and I can't get the player Unity3D in Muse. Unity3D makes an HTML page and I took the code < head > of this and put it in the in the < head > Muse region using the page properties dialog box.  I also created an HTML object in the body <>the page and pasted into the content of the < body > of Unity3D HTML generation.  When I preview the page, I get the page loading of the unit, but nothing loads.  No progress bar is displayed.  Any thoughts?  Thank you.

  (Through this announcement on the forum Unity3D)

  In my view, that a change is necessary in the work of any code.

  Thank you

  Sanjit

• How to get the print work selection

  I am unable to get select it feel working on Firefox 11.o. I can't click on select printing but nothing prints. Apart from 11.0 to downgrade uninstall, there are patches? I use a mac os x version 10.7.3. Any help would be greatly appreciated.

  This morning, I downloaded the new version and it works now! Yes!
  Thank you for this issue!

• How to get the scroll work on galaxy S pen notes 2

  I noticed that I can't scroll with the pen of view S air as I can on other Android browsers such as stock or dolphin. Any suggestion would be great.

  From now on, this does not work and I don't know when it will be implemented.

• How to get the BT works after removing the battery of BT on a Satellite A120

  Hello

  I have a new satellite A120 and it had bluetooth...
  IT HAD bluetooth.
  I clicked by mistake on the prog to install for battery bluetooth... and it UNINSTALLED.

  Now, it will not install again. It just happens to 'Setup Bluetooth device', waits, and then comes back with the message "Please plug in the bluetooth device, then click OK" and bluetooth devices are in Control Panel or the system devices.

  What can I do?

  Objects of curiosity very it is, because you can't "Uninstall" a hardware system with just disconnected from the control panel. After that, it must be recognized by the system and reinstalled. Do you have a few unknown devices in your device manager.

  It might be trying to let Device Manager looking for new material, and then your machine you might find the BT card.

  See you soon

• How to get the Bluetooth works on Satellite U300-155 and Linux Kubuntu 8.04

  I bought Toshiba Satellite U300-155 and I have Kubuntu 8.04 languages, but I don't see bluetooth when I turn it on.
  How can I use bluetooth under kububtu 8.04?

  Check if the antenna of your laptop switch is on. I think that the graphic tool should exist to manage the bluetooth. However if you're familiar with the linux console
  Then, you can also try the following command to activate bluetooth:

  sudo toshset - bluetooth module Bluetooth to connect to the USB bus
  sudo hciconfig hci0 upward
  sudo lsmod toshiba_apci-online background of access keys (+)
  sudo tail-f/var/log/acpi
  module installation sudo modprobe toshiba_acpi if not already available
  Press + to turn Bluetooth on or off. Check the acpi log output
  sudo hciconfig hci0 Bluetooth peripheral power

• How can BlackBerry Smartphones GPS on 8310 I get the card?

  Can someone please tell me how to get the cards and use them on my 8310 as a gps travel card. I use very often and that you don't really want to pay for them.

  I saw a discussion on free google maps.

  Help, please

  Ash

  Hi and welcome to the forums!

  Google maps is a free application that uses the GPS and triangulation via cell towers. If your GPS is enabled it can be very accurate. If your gps does not find a satellite, Gmaps will be triangulate your position within 3,000 metres.

  The cards are excellent, provide traffic, both in turn. Satellite image shows as well.  Allows to search for the company and displays the phone number and address. You can click on the number to call.

  Again, it is free, so you can lower the load and try it.

  Here is the link: http://www.google.com/mobile/default/maps/index.html

  Let me know if this helps or if you need more help!

• Re: How to get the Tempo to work properly?

  Hello

  I have problems with the service of Tempo.

  I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.

  When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.

  I tried to reinstall the application, but no change in the situation.

  Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.

  Any ideas on how to get the Tempo to work properly?

  Thank you.

  I saw in your other thread you have installed SP1 on your Vista laptop.
  There may be some compatibility problems between SP1 and Tempo

  And Yes, as far as I know Tempo bring all available updates!

• How to get the physical credit iTunes gift card?

  How to get the physical gift card iTunes on your iTunes store account balance?

  • You cannot buy an iTunes gift with in-store credit.

  See the link below to buy physical gift cards for iTunes.

  http://www.Apple.com/shop/gift-cards

• How to get the webcam to work?

  Hello

  As I don't have a book of instruction for this computer, can someone tell me how to get the webcam to work please?
  It is supposed to be something that appears on the side of the screen, but I left the sit of mouse here for centuries on all sides and nothing. Please help me.

  Kit_e

  Hello

  I agree with the user above. The user manual you can find on your computer because it s preinstalled.

  The webcam, you can use with programs like Skype communication. You can make a video call with friends and they see the webcam image. ;)

• Satellite L500 - how to get the keys FN works on Windows 7 64 bit?

  Hello

  I need to reinstall Windows 7 on a Satellite L500, but I can't get the FN keys to work. Someone here would be able to give ideas on how to get this to work?

  Case No.

  Hello

  It's pretty easy. Go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and download the utility of Vap and Flashcard support. Then, install Vap and restart your laptop. After that do it for the support of Flashcard.

• How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7

  Hi baldwinj,

  Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.

  HP LaserJet Color LaserJet and products of LaserJet AiO/MFP - install the driver included in the operating system Windows 7 (OS)

  Download drivers and software