How to get you to multiple pictures at once in Flash?
I want to draw something to about 10 images, but I don't want to have to draw on all of them or to copy and paste because it forces to not be aligned with the drawing in the previous image. I watched it, but I can't seem to find someone the same question. I tried to use editing multiple frames tool, but it does not work for the things (perhaps a user error), but works for staggering things as it is supposed to be drawing. Does anyone know how to draw multiple images at the same time if this is possible?
You can copy the contents of a layer and paste in place another layer but you will have to do so at each new keyframe. The dough persist across keyframes.
Tags: Adobe Animate
Similar Questions
-
I installed vista SP2 and when I started my computer back up everything on my computer is missing... How to get back all my pictures and music files? I tried to do a system restore, and I can't go back any further, then the service pack install... so everything is still missing... Please help!
Hello
Were there any changes or updates made on the computer?
I suggest you to see link and check if it helps.
Recover lost or deleted files
http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files
See the articles and looking for the missing files.
Find a file or folder
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-file-or-folder
Tips for finding files
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files
-
How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?
How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?
Is 8.3 typo?
After which update exactly?
-
How to get the documents and pictures off dead PC with Windows XP to Windows 7?
have a computer laptop w / W7 and a pc with XP that does not work. on the laptop, I can only find documents/photos for the user of the original laptop. We use msn as our Internet service provider. can I get my documents/pictures power off the pc dead to show on the laptop. I get my mail and I know it's on the storage of Ms do not know what can be done on the other info. I have a driver to drive external but not ready to be the pc immediately. There is an icon on the desktop page original user ID but have not been able to get an icon for my log show.
Hello
1. you try to transfer data from the laptop XP to Windows 7 computer?
2. What do you mean by icon storage and user of MS?
3. what exactly happened to the XP computer?
Be more specific to help you better. Visit this link: http://support.microsoft.com/kb/555375
-
How to get you the serial number?
When I go to adobe.com/go/getserial there is no place to put in my redemption code.
Hi Timothy,.
Please follow the link below to get help on how to refund your purchase.
If you still need additional help, please follow the link to contact us.
~ UL
-
I'm trying to builld a VI where I can have an option to enable or DISABLE multiple channels depending on the modules plugged into the chassis and then acquires the data of the channels which are turned on and where other acquisition parameters do not change. Is there any specific/switch where can I do this? Please answer as soon as possible. Its quite urgent. Thank you
You use DAQmx? To change the assignment of the data acquisition channels, you must close the currently open session and then create a new session with the new channel definition. So the order of execution:
Create task or virtual channel - read - clear task of triggering and synchronization of the configuration - set new channel list and to create a task - read - clear task, etc...
-
How do get you the cell phone of Aptio Setup utility loop?
My laptop Samsung series 3, which works under windows 8, began to update something and after turning off the power. When he died I turned it back. When it was loading up a strange beep came from my laptop. After the noise he black and showed the Samsung logo. That, he went to Aptio Setup utility. I tried to get out, but it is just the same thing. I tried to change the time system, but did not. My bios version is P07ABF and my laptop model number is NP365E5C. Someone help me!
Hello
It seems that you may have to contact Samsung about this problem.
But see if that helps you.
It is information about codes of "beep".
"beep" codes normally indicate a hardware problem / failure.
Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have
Then read this on the 'beep' error codes to try to see what failed:
http://www.computerhope.com/beep.htm
http://www.pchell.com/hardware/beepcodes.shtml
http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm
If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.
If it is not under warranty, find a good repair shop premises to take.
See you soon.
-
How to get you to your adobe website muse on Google?
I have a pretty simple site and im using google webmaster and they gave me the code to verify that it is my site, and they tell me to download on my site? How do I do that?
goatciwood I apologize for the confusion, unfortunately for us, not all of us are programmers, here are the instructions will fix the problem without having to fine a million sons
In Google Webmaster Tools
If you use Muse, you will need to use the 'alternative approach' to check Google. The recommended method will not work.
After clicking on the "other method" tab you can see the different options, including an HTML tag
The code is generated automatically, it will be the first box on the page and it will look something like this:
Copy this code exactly
Muse opened
Right-click on your home page in the display of pages (where you can see the entire page in page mode)
Open the "Page properties" option
Click on the metadata tab (the average tab in the window)
Go to the bottom of the window under "HTML".
:"Paste the code you received for the HTML tag so that it looks exactly the same as those provided by Google. Nothing else should be in this area not to mention that Google code
Save and publish the site
In Google Webmaster Tools
Click on the box "Check" red at the bottom of the tab 'alternative approach '.
Do not remove the HTML head even once it has been verified
Here are the exact steps you need to follow for the verification of the site through Muse. I don't know why support staff could not simply state such things clearly in a progressive way.
-
HOW DO GET YOU A CD FOR M9040N PLAYER DRIVE DISABLED
I HAVE LOST THE USE OF MY CD PLAYER AND WOULD LIKE TO DO WORK AGAIN
Hello
You're welcome and good to hear it works
All the best,
DP - K
-
Help, please
Here's how to uninstall the Google toolbar: http://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=9231
-
HOW DO GET YOU A DVD MOVIE PLAYER to THE WINDOWS APPSTORE for WIN 8
WHAT IS THE BEST AND SAVE TO WIN 8. I CAN'T RECORD ANY MOVIE IN MY MEDIA PLAYER TO WINDOWS 8.
Hello Valencia,
Thanks for the reply.
I suggest you to refer to the items provided in the previous answer and let us know the status of the issue so that we can help you.
Feel free to post your request here on the Forums of Windows, we would be happy to help you.
Thank you.
-
My Acer Aspire One has error "windows\system32\config\system" How can I get a copy of windows xp original usb? When I bought the
computer laptop windows xp made & paid for. Product key is on the back. Can I download & reinstall using a flash drive?
C:\Windows\system32\config\system is one of the files that make up the system registry. Backups of the system registry files are kept in the 'C:\System Volume Information' folder under the system restore program. Probably all you need to do is copy of registry backups in the Windows\system32\config folder. A reinstall of windows may not be necessary.
To do this is to start your machine from a free "Live Linux" thumb drive. You can create a startup disk Ubuntu here:
<>http://www.Ubuntu.com/download/Ubuntu/download >Follow the instructions of "Try me" and you should be able to copy backups of registry in place. Windows has "Hidden doubling" the System Volume Information folder, but Linux doesn't seem to have any problems with it. After starting from the Thumb Drive Linux, follow the instructions in the following article from part 2, step 6, using the graphical interface of Linux to copy files (right click copy, make a right click Paste) instead of the lines of command in the article. With a little patience, you can restore the registry from a backup, and be back in operation
"How do I recover from a corrupted registry that prevents Windows XP startup"
<>http://support.Microsoft.com/kb/307545 >HTH,
JW -
Apply changes to multiple pictures at once
I'm not sure when this happened, but I just got back from vacation and I tried to apply a preset to a group of photos. It applied only to the first picture. I know that I was able to do this in the past so I was wondering if it has changed in an update or in the preferences. I had version 2.6 and it did not work and I've just updated to version 2.7 and it still does not. Does anyone have any insite? I don't want you must manually add the same settings to 800 photos! Thanks in advance.
Suggestion of Beat it's even better! (This is because he knows even better LR that I do).
It's the help doc (search help for 'sync'):
Synchronize settings with multiple photos
If you work in the development or the library module, you can use the Synchronize command to apply some development parameters of the current photo to other photos selected in the Filmstrip. (The current photo is indicated by a white border more light in the miniature of the film).
Note: When only one photo is selected in the film, the sync settings command is not available. In the develop module, the sync button becomes the back button; in the library module, the sync settings button is inactive.Shift-click to select the other pictures on the Filmstrip to synchronize with the current photo and then do one of the following:
- In the develop module, click the sync button, or choose settings > sync settings. Select the settings to copy, and then click on synchronize.
- In the module development, Ctrl + click (Windows) or Cmde (Mac OS) the sync button to change it to the Auto Sync button. Then, drag the sliders or make adjustments to the current photo, and the same adjustments are automatically made to the other selected photos. Click the Auto Sync button to exit Auto Sync.
- In the library module, click the sync settings button, or choose Photo > develop settings > sync settings. Select the settings to copy, and then click on synchronize.
If you don't want to apply the changes to all images, then select only some of them. If you want to only check the settings you want to update in the Synchronization dialog box only apply some settings to multiple images.
John
-
Hello
I'm developing a graphic clickable flash of APEX, which should be linked to a specific set of data on another page using the SeriesName (clicked several sets of cards).
(Returned by a function) sql for APEX chart is
Select distinct null link, d. DNAME label
, sum(e. SAL ) over (partition by e. ( DEPTNO salary ( )
, sum(e. Comm ) over (partition by e. DEPTNO ) comm
de d Dep. , emp e
où e. DEPTNO = d . DEPTNOCurrently I am able to disply SeriesName (e.g. salary or Comm) on the 2D chart. This is done by including {% SeriesName} Custome XML.
But I am unable to detect which series name, the user clicks on - pay is comm. for example, I am not able to enter the name of the series clicked and set it to a hidden item (called P38_SERIES_NAME). I have to use JavaScript to achieve this? If so, how?
The reason why I want to use the unique sql is due to that I will have to call a function to return the dynamic and running sql code, I don't know how many series I. i.e. could be comm, average age, salary, bonus etc...
What is the easiest way to achieve this? I use APEX 4.2 and Oracle 11 g.
Thanks for your advice.
Concerning
Susanna Su
Susanna,
What you experience is the difference between session state and the value of the element on the page. The URL you have is generated on the rendering of the page and use the value of current session state of the question right now. Then when the page is on the client side and that you set the value of the item through javascript this value is still next to the customer and not in session state. Put the value in session state would not matter, however, because the link has already been made. Your best option is to send the page, ensuring the correct value is set to session state and use a branch in present after the process to redirect the user to the correct page.
I have also described this here: https://forums.oracle.com/message/11110579#11110579
-
How to get the 'Topic' and 'Message' text the default Flash of MS Outlook mail form?
Hello
I have the following code which works fine except that I can't get the user has typed form flash for my e-mail application (MS Outlook) data. How to change the following code?
In the code:
1) for-> This field is correct since this e-mail ID does not change
2) cc-> this filed is also correct since no change will be in the identification of email
3) topic-> which may not always be as "Feedback", users might want to change the subject
Whant I would add more is here:
(1)-> this text to be retrieved from 'fromText.txt' text entry box
2) message-> this text to be retrieved from 'MessageText.txt' text entry box
1 button event listener
SendMail.addEventListener (MouseEvent.CLICK, SendEMail);2. the SendMail function open e-mail application to send e-mail.
function SendEMail(event:MouseEvent):void {}
var email: URLRequest = new URLRequest ("mailto:[email protected][email protected] & topic = Feedback");
navigateToURL (email, "_blank");
}Thanks in advance for any help.
Kind regards.
use:
var email: URLRequest = new URLRequest ("mailto:[email protected]?") [email protected]& topic = "+ subjectText.text +" & body = from: "+ fromText.text+"\n\n"+MessageText.text);
Maybe you are looking for
-
Hello I have questions see my files. Please see photo. I'm on 10.9.5. I rebooted a few times also and having the same problem. Whenever I double click on the hard disk, the Office is empty and then appears. Any help would be greatly appreciated...
-
Portege R700 stops at 90% load and stay at this level
The stop charge to 90% to stay at this level.The laptop is new, but the battery bar software indicates a level of wear of 8.5%. How can I solve the problem?
-
Applications do not install it on El Capitan
I recently managed to get rid of my old iMac to a new, but I had one of the problems is to install apps. specifically, Google Chrome and Sketch Up. Download completed successfully, but when I see the sign that says to put the new program in the Appli
-
I recently bought a Sansa Fuze and have had 2 concerns: (1) I downloaded the firmware update, but the SlotRadio icon does not come upward (2) I still have to find a store that sells slotradio cards (or even the slotradio readers) here in the Canada.
-
Windows could not search for new update error code 80070002
80070002 error code when you try to update windows