How to give to all users in the domain?

Similar Questions

• How to allow access to all users of the connection on my computer?

  How to allow access to all users of the connection on my computer?

  Your question is hard to understand.  I interpret as:

  "How to allow all the users on my computer to access some files or folders?

  The answer depends somewhat on the question of whether you have XP Pro or XP Home, but a general answer is found the following article.

  "How to use file sharing Simple to share files in Windows XP"
    <>http://support.Microsoft.com/kb/304040 >

  Click on "level 3: files in shared documents available to local users"

  HTH,
  JW

• How to change the password for all users in the database

  Hi buddies!
  
  Could someone tell me how to change the password for all users in the database? I want to set the same password for all users.
  
  Thank you.
  
  Nith
  
  Published by: user645399 on March 1, 2011 14:23

  Write the file spooling
  as

  Make sure that all profiles has password_verify_function with a NULL value

  then

  Select 'edit user' | username: ' identified by ;' from dba_users;

  you will get the output... you just run.

• Why all the PDF Documents open see available to all users on the network?

  Install Adobe Acrobat for all users on the network by using the same account to actviation.  All documents pdf which have been opened by any user is now available to all users.  How can I stop this?

  If you meet all THE USERS who connect to the use of the machine the same Adobe ID, then they will have access to this Adobe ID PDF files.  If you want to stop all services feature Document Cloud, then take a look at the documentation below link and apply the registry entries that are relevant.

  Integration of services

• Disable and enable all users of the application.

  Hello.
  
  Due to some data merging activity I want to disable all users of the application except those users who will be involved in this activity then is there any option profile at the SITE level or any other way through this I have to do this.
  
  Application: Oracle Ebs R12 (12.1.2)
  DB: 11.1.0.7
  OS: Linux5 * 86 X 64
  
  with impatience.
  
  Kind regards
  Mohsin
  
  Published by: 920138 on October 12, 2012 22:41

  Mohsin,

  You can set an end_date for these users (if possible) - how end-Date/remove a user of Applications [1064798.1 ID]

  There is another way through profile options, but I can't share it here since it is not supported.

  Thank you
  Hussein

• How can I disable all tabs at the same time?

  How can I disable all tabs at the same time with the IMac?

  Ask yourself how to close Firefox with multiple tabs / windows open?
  
  Firefox menu > exit.
  
  Or, you try to do something else?

• Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer? Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Hello

  In Windows 7, the AllUsers folder is not a real file.

  It is a symbolic link that redirects to the C:\ProgramData folder.

  ProgramData is not hidden, by default.

  The correct syntax for the Attrib command would be,

  C:\>attrib h ProgramData

  You can view all files by going to the tab options\View Organize\Folder and research.

  In the section files and hidden files , place a check mark in the Show drives, folders and hidden files.

  Click Apply/OK.

  Concerning

• Error "have sufficient privileges to complete this installation for all users of the machine. "log on as an administrator and try again the installation" when you try to install iTunes

  Original title:

  I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes.

  During this process, I get the message "you don't have sufficient privileges to complete this installation for all users of the machine. log on as an administrator and try this installation again. ». but I am logged on as administrator.

  Hello

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Right click on the installer for iTunes and click Run as administrator.

  Method 2:

  Disable user account control settings and check.

  Enable or disable the User Account Control

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. Disabling it can make your compromised computer. Please make sure that enable you UAC, once you have completed troubleshooting.

  Method 3:

  Allow the default Administrator and try to install it in this user account.

  a.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  b.Type in the following command and press ENTER.

  NET user administrator / active: yes

  c.Log disable the current user account and log in to the user called Administrator account.

  d.Install iTunes in this default Administrator account.

  e.Once of that installation is complete, the default administrator is disconnected.

  f. log in to your user account.

  g.Disable the default Administrator account. Follow these steps.

  i.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  II. type the following command and press ENTER.

  NET user administrator / active: No.

• Help! How to link to information users at the user page?

  I created the connection index, register, and sign the php pages. MySQL. Now I'm trying to create the user profile page. But I can't link their information to the user page. So, how to link to information users at the user page? @

  maniragav26 wrote:

  I created the connection index, register, and sign the php pages. MySQL. Now I'm trying to create the user profile page. But I can't link their information to the user page. So, how to link to information users at the user page? @

  Can I assume you are using Dreamweaver server behaviors (I guess if you ask this question, it is likely that you would be).

  Go to the mode code in your "login" page Find the section of code that creates the DW:

  $LoginRS__query = sprintf ("SELECT Uname, Pword OF USERS WHERE Uname = %s AND Pword = %s",

  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));

  $LoginRS = mysql_query ($LoginRS__query, $connUsers) or die (mysql_error ());

  $loginFoundUser = mysql_num_rows ($LoginRS);

  If {($loginFoundUser)

  $loginStrGroup = "";

  Declare two session variables and assign them

  $_SESSION ['MM_Username"] = $loginUsername;

  $_SESSION ["MM_UserGroup"] = $loginStrGroup;

  INSERT THE CODE in RED below: 'id' is the name of the id column in your database table - if it were 'user_id' that's what you have inserted.

  $LoginRS__query = sprintf ("SELECT users id Pword, Uname, Uname WHERE = %s AND Pword = %s",

  GetSQLValueString ($loginUsername, "text"), GetSQLValueString ($password, "text"));

  $LoginRS = mysql_query ($LoginRS__query, $connUsers) or die (mysql_error ());

  $loginFoundUser = mysql_num_rows ($LoginRS);

  $row_rsUserDetails = mysql_fetch_assoc ($LoginRS);

  If {($loginFoundUser)

  $loginStrGroup = "";

  Declare two session variables and assign them

  $_SESSION ['MM_Username"] = $loginUsername;

  $_SESSION ["MM_UserGroup"] = $loginStrGroup;

  Now to find the under section of code in the 'login' page: (this implies that you have defined a 'success' page to return IF the connection information is correct):

  If (isset($_SESSION['PrevUrl']) & false) {}

  $MM_redirectLoginSuccess = $_SESSION ["PrevUrl"];

  }

  Header ("Location:".) $MM_redirectLoginSuccess);

  }

  else {}

  Header ("Location:".) $MM_redirectLoginFailed);

  }

  INSERT THE CODE in RED below: 'id' in $row_rsUserDetails ['id']; is the name you gave the id column in your database user table, so if it was "user_id" it would read as - $row_rsUserDetails ['user_id'];

  If (isset($_SESSION['PrevUrl']) & false) {}

  $MM_redirectLoginSuccess = $_SESSION ["PrevUrl"];

  }

  $_SESSION ['id'] = $row_rsUserDetails ['id'];

  Header ("Location:".) $MM_redirectLoginSuccess);

  }

  else {}

  Header ("Location:".) $MM_redirectLoginFailed);

  }

  NOW, you create your user details page.

  Create a Recordset, select the table of database you want to gather information about the user. Select the filter to 'none '.

  Go to the view code and at the top of the page, insert:

  <>

  $userId = $_SESSION ['id'];

  ?>

  NEXT FIND THE CODE THAT SELECTS DATA FROM THE DATABASE: (your will be slightly different as you use different details of connection and recordset)

  @mysql_select_db ($database_connUsers, $connUsers);

  $query_rsUserDetails = "SELECT * FROM USERS";

  $rsUserDetails = mysql_query ($query_rsUserDetails, $connUsers) or die (mysql_error ());

  $row_rsUserDetails = mysql_fetch_assoc ($rsUserDetails);

  $totalRows_rsUserDetails = mysql_num_rows ($rsUserDetails);

  Change the second line above to: (add red code below for your SELECT string) (remember WHERE 'id' - 'id' is the name of the column in your database table.)

  $query_rsUserDetails = "SELECT * FROM users WHERE id = '". " $userId. » ' ";

  It's her!

  You can now start "liaison" details on the user Details page.

• How can I access all instances of the itemRenderer in a specific DataGridColumn?

  How can I access all instances of the itemRenderer in a specific DataGridColumn? Or, if I have a rowIndex and columnIndex, how do I get the itemRenderer to these clues?

  I use States to change the display of my itemRenderer of a TextField of a PopUpMenuButton. What I was trying to do was change back the display of all the other itemRenderers visible in the column of the textfield, when one of the itemRenderers displays the PopUpMenuButton.

  I tried to loop through all of the itemRenderers in the column and casting them as the class I was using and then by setting the currentState, but, it wasn't good performance wise and required too code. I simplified it listen to a change on the listData owner event (in my case a DataGrid, but any component ListBase) and by setting the currentState to null when it is triggered. Works like a charm.

• Create a scheduled task and deploy on all computers in the domain

  Hi all

  I have the following requirement:

  I need to automatically run a program of cleaning (Glary utilities) on all computers at a time as 10:30 on all computers in the domain. Also all by running the UAC program block and ask the admin domain password every time. I need only this program to be run as a domain user and run at the precise moment on all computers in the domain at a time. How can I do this? Help, please.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Grant Local Admin rights to users in the domain

  I need to grant privileges to local administrator for the users in the domain on our network. I did it through local users and groups. In groups, I go to the Administrators group and assign the Group of teachers to have local administrator rights. This works very well for the first day. Later, when a teacher says they cannot update the applications or install the software, I'm going in and finds that the privileges for the Group of teachers under managers disappeared. It continues to be. Can anyone shed some light on what's going on? I did it on the XP computers all the time and it worked fine. Thank you!

  Hello

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that you need to grant administrator privileges and it does not work as expected, rest assured that we will do our best to help you with this problem.

  You want to grant permissions on a domain network, I suggest you post this question in the TechNet forums to get help.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• machine icon has disappeared from Windows Explorer on all systems in the domain

  I have a windows xp computer in my area of the company.

  The system is fully functional (all systems within the domain can access all the resources on the system as usual. Recently, Windows Explorer of this system icon is not displayed and must manually access \\servername entering the bar of text on another machine in the field.
  Any suggestion would be appreciated! My apologies if this isn't a forum appropriate for this issue.

  Thank you

  Bill
  Hi Bill,
   
  This problem is related to the areas of work, it's more complicated than the issues normally dealt with on this forum. Therefore, I beg you to post this question on the following TechNet forums, because they are better equipped to help you:
   
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
   

  Hope this information is useful. Please get back to us with other questions you may have about Windows operating systems.

• How to make a program available to all users if the program was installed for a user

  Basically, the problem is that I created another user account, but only a few random apps appear on it and I was REALLY looking FORWARD to having to reinstall some programs + 50 so my computer can function normally on my secondary account.  I am able to find a lot of programs installed by snooping around in Explorer and have been able to run some by creating shortcuts, but many of them (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) nothing do when the .exe is open and are unusable (on this account).
  Also, I want to say there is no page support for Windows 7 that cover this topic (that I could find by using the provided search engine), and the more those (as for windows 2000) do not apply because they tell you to move files Windows has more, but it is a known problem and Microsoft should incorporate a simple way to add or remove accounts without uninstall/install programs just to be able to check a box... _ Perhaps there could even be an option for this in a very obvious place, as installed programs list of the filth or user account settings.

  Emzzey wrote:
  > Fundamentally, the problem is that I created another user account, but only a few
  > random applications appear on it and I was REALLY looking FORWARD to having to reinstall some
  > + 50 programs while my computer can run normally on my secondary account.
  > I am able to find a lot of programs installed by snooping around
  > Explore and have been able to run some by creating shortcuts, but a large number of
  > (Spybot, Itunes, Google Chrome, THE LIST GOES ON!) don't do nothing when the .exe
  endered useless (on this account).
  >
  >
  > Also, I want to say there is no page support for Windows 7, which deal with these
  > subject (that I could find using the search engine provided) and older
  > (as for windows 2000) do not apply because they tell you to move files that
  > Windows has more, but it's a known problem and Microsoft
  > should include an easy way to add/remove programs of accounts without
  > uninstall/install just to be able to check a box... _, may be
  > could even be an option for this in a very obvious place, like user account
  > settings or the bitch list installed programs!

  Any application that is properly designed to work on Windows 7
  either would give the person making the installation option to
  make the application available to all users, or do it automatically.
  by default. It is entirely the responsibility of an application
  programmers and out of Microsoft's control. Thus, the easiest way, of
  of course, is to use an application that is designed for a multi-user operating system.
  But, unfortunately, this is not always an option, where companies must rely on
  existing proprietary applications.

  If you install the legacy application places its shortcuts
  only in the start of the person performing the installation, all the
  You may need to do is to move these Start Menu entries to the same
  location in the C:\ProgramData\Microsoft\Windows\Start start\program
  folder and/or the C:\Users\Public\Public Desktop folder.

  In addition, such an incompatible application can offer additional
  "challenges:

  You may experience problems if the software has been designed to
  Win9x / Me, or if it was intended for Windows NT / 2 K/XP, Vista/Win7, but was
  poorly designed. Quite simply, the application 'knows' how
  manage individual user with different security permissions profiles
  e going to
  'banned' sections of the Windows registry or Windows protected
  system folders.

  For example, the saved data is often stored in a subfolder under the
  folder of the application in C:\Program Files - a place where it doesn't
  the inexperienced user or limited should never have write permissions.

  It may even be that the software requires 'write' access to the parties
  the registry or the files/folders to systems protected are not normally
  accessible to regular users. (He * didn't * happen if the application is)
  correctly written.) If this does not prove that that is the case, however, you
  often left with three options: either grant the required users
  privileges of senior access (either as users with power or local
  Administrators), explicitly grant privileges for normal users
  the relevant records and/or parts or the registry or replace the
  request by another who has been properly designed especially for
  WinNT / 2 K/XP/Vista/Win7.

  Some programs do not work if you connect limited account
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; q307091

  In addition, here are some tips suggested, in response to a
  another post, MS - MVP Kent W. England:

  "If your game or your application works with administrator accounts, but not with."
  limited accounts, you can set it to allow limited users to access to the
  folder Program files with 'change' ability rather than 'read' that
  is the default value.

  C:\>Cacls "Program Files\appfolder" /e /t /p user: c

  where "appfolder" is the folder where the application is installed.

  If you want to undo these changes, then run

  C:\>Cacls "Program Files\appfolder" /e /t /p user: r

  NOTE: On Win7 Icacls.exe gives more control.

  If you still have a problem with the delivery of the program or save the settings
  on limited accounts, you may need to change the permissions in the registry
  keys. Run regedit.exe and go to HKLM\Software\vendor\app, where
  the key of the Publisher of the software used to your own
  program. Change the permissions on this key to allow users full control. »

  --

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty for a little temporary
  safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest was
  has killed a large number of philosophers.
  ~ Denis Diderot

• How to give read, write permission to the directory from one user to another user in oracle 10g

  Hello

  I have a database in two. key is the source database and Board of Directors is the target database. Now I want a (single) create these two database directory to put the dump file. How can he give permission to READ, WRITE access to this directory both of database? Someone help me.

  Hello

  I think that first create a level of operating system directory, and then try Mr.Kar k steps

  OF DATABASE1 (KEY)

  SQL >dir1 CREATE or REPLACE a DIRECTORY as "/ opt/oracle / ';

  SQL >GRANT READ, WRITE on dir1 to the PUBLIC; (if you want to give access to all users then give public access)

  SQL >GRANT READ, WRITE on rep1 to ; (if you want to give access to the particular user)

  OF BASE2 (COUNCIL)

  SQL >CREATE Or REPLACE rep1 as DIRECTORY "/ opt/oracle / ';

  SQL >GRANT READ, WRITE on dir1 to the PUBLIC; (if you want to give access to all users then give public access)

  SQL >GRANT READ, WRITE on rep1 to ; (if you want to give access to the particular user)