How to give users a change log?

Similar Questions

• How to give users the ability to select the rate based on HSP_Begin, HSP_Average or HSP_ending

  Hello

  We wanted to give users the ability to select the rate based on HSP_Begin, HSP_Average or HSP_ending.  How you would achieve this?

  I have some ideas:

  (1) a less optimal solution is to create a user variable called FX_Beg_Ave_End, and then run a HBR script to perform the conversion of FX before completing the form.  The HBR will prompt the user to enter "HSP_Begin, HSP_Average or HSP_ending.  He's going to calc and display the converted data in the form based on the user input.  It's embarrassing because users must type in 'HSP_Begin, HSP_Average or HSP_ending' to all forms.  It is also better to pull data directly from one of the members: 'HSP_Begin, HSP_Average or HSP_ending'.

  (2) a better alternative is to put the POV of the form points to the variable user FX_Beg_Ave_End.  When the form appears, it will draw the name of the FX_Beg_Ave_End member variable and display the data of the Member (for example 'HSP_Begin, HSP_Average or HSP_ending') stored in FX_Beg_Ave_End.

  Thanks for your ideas.
  

  Hello

  In fact for your option, so you could make a selection of members would not have users typing the name.

• How to give users access to the database schema?

  I have the following databases:
  
  Running test of Oracle9i Enterprise Edition Release 9.2.0.6.0
  Production is currently running Oracle9i Enterprise Edition Release 9.2.0.7.0
  
  I created a user at the same time and on the production side, it works fine, but on the side of test, I get ORA-1017: name of user and password invalid. connection refused when I try to connect via my web application or when I try through sql more is not log to the side test but does for the Pb of the production.
  
  How can I compare two users?
  During the creation of my table, procedure, etc. scripts, I have granted access this even sure if the user has rights to the tables and other objects.
  
  There is another main user account that is able to do everything that I need so I know it's possible, but need me something to allow my new user to connect.
  
  Thanks for any help you can give me.
  
  Published by: jerry8989 on March 16, 2012 08:10

  jerry8989 wrote:
  I have the following databases:

  Running test of Oracle9i Enterprise Edition Release 9.2.0.6.0
  Production is currently running Oracle9i Enterprise Edition Release 9.2.0.7.0

  I created a user at the same time and on the production side, it works fine, but on the side of test, I get ORA-1017: name of user and password invalid. connection refused when I try to connect via my web application or when I try through sql more is not log to the side test but does for the Pb of the production.

  How can I compare two users?
  During the creation of my table, procedure, etc. scripts, I have granted access this even sure if the user has rights to the tables and other objects.

  There is another main user account that is able to do everything that I need so I know it's possible, but need me something to allow my new user to connect.

  Thanks for any help you can give me.

  Published by: jerry8989 on March 16, 2012 08:10

  "ORA-1017: name of user and password invalid; connection refused '.

  Oracle is too easy to lie about it. It has noting to do with what privileges you have given to the user. There is never far enough to worry about privileges. Either you provide a user name does not exist, or you provide the wrong password for this user name. Period.

• How to prevent users from changing the network connection?

  Hi all

  I have a weird problem. I set up my HP ThinPro T610, I have to say is simple enough. I want users just to turn on the computer, wait a few minutes and log into the Terminal Server Services on the Server RDP connection, so I basically blocked every user of things could possibly click - they have no taskbar, etc. Connection Manager.

  Now, there's one thing I can't block - 10 seconds, users can see "Network connection" pop up, in which they can - at my enormous disbelief -change the connection settings.

  I can't find a way to block this... everyone can share their experience with this issue?

  Hello

  Hope you use thinpro 5 OS

  Could you please try these step

  1 log in administrator mode

  2 Goto advanced - Xterminal regeditor and type

  3. go in config wizard

  4. change the value to enablenetworkcheck and save and reboot

  ====================================================
  
  Although I am an employee of HP, I speak for myself and not for HP. ===
  
  * Click on the star of CONGRATULATIONS on the left say "thank you."

• How to give users a group of line access to a voice mailbox using Cisco CM 8.5?

  Users who are part of the group line not to see when a message is left on the phone. Is there a way to associate the Group of curves with their voicemails?

  In the unit, it is called replacement extension.  This is the same problem solved by someone else

  https://supportforums.Cisco.com/discussion/11527831/MWI-alternate-extension

• How to give permissions to the user for the administrator.

  I work in an organization. We use Windows XP with SP2. I delete the administrator user rights. At that time, some user systems have it problems.that's files and folders are not able to move, copy, cut, delete, all permissions are deleted. Please tell me how to give these permissions (move, copy, cut, delete) for the user's systems.

  This article explains how to set file access permissions:

  "How to set, view, change, or remove special permissions for files and folders in Windows XP"
    <>http://support.Microsoft.com/kb/308419 >

  HTH,
  JW

• Account name My Vista "a name of the user [name] account log does not exist on Windows Home Server" is not, despite the change.

  My Windows Home Server (WHS) prefer the same name of user account on all computers that I use - for the connection and easier access to the files. So to my Vista computer, I changed my account [ancien_nom] name [name]. Vista indicates the name of the new account everywhere but the server after a while (!) stopped recognizing my account and complains about "a name of the user [name] account log does not exist on Windows Home Server" suggesting I should change the name of the account on the ESM. Since I have other computers where I can't change the name of the account (work computer), for this purpose I changed the name of the account on my Vista computer.

  The reason why the WHS could work properly at the beginning maybe I can connect to the WHS folders in a separate process by using the new account name. Choose to save the password - which might have worked for a while, but no more. I also tried to connect as a network device, but I do not correctly reconnect with the identification information data (and saved).

  1 is the name of initial account stored anywhere even if I changed and the reason why it can pop as in this case?

  2. any ideas on how to solve this problem?

  3. or is the problem only on the side WHS - then I might have to turn to a WHS forum

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  They will help you in the above Windows Home Server Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• How to give a limitation of internet access to users via gpedit.msc?

  How to give a limitation of internet access to users via gpedit.msc

  Hello

  Follow the below mentioned article:

  How to use the Group Policy Editor to manage the Local computer policy in Windows XP: http://support.microsoft.com/kb/307882

• How to give administrative rights for the domain users (user is outside organization).

  Hello

  How to give administrative rights for the domain users (user is outside organization).

  If the employee works in the company of xxxx but it supports the client project and is located on the place of the customer, but it does not use the client computer and not on the client domain as well, but the employee is in the company of xxxx must be given administrative rights to the computer. can someone help me on this ASAP.

  Thank you

  MURUGESAN Rudy,

  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• How do you assign the user who has logged in to the current session?

  Hello

  in oracle forms, you might affected the user who is logged on any field, for example field_name: = USER_ID;

  I need assign the user that has connected to a field in jdeveloper 12. How do you do that please?

  Thank you.

  Try this: https://www.google.com/search?q=adf+get+current+user

  CM.

• How to give the user ONLY views all SYS?

  My DBA cannot give me all s/n priveligies, but does not know how to give me ONLY priveligies all SYS views (v$ sql, v$ sqltext, process$ v, dba_scheduler_jobs,...)
  
  How to give the user to display all VIEWS SYS?

  in my case should be 1)? Right?

  The privilege or role will provide the desired access.

• How to prevent from being changed by the user or: SliderDouble ranges

  Hello

  I have a slider in WPF / c#

  <>liderDouble height = "60" Name = 'updateRate"ValueChanged ="OnUpdateRateValueChanged"range ="0.05,1"Value ="0.05"/ >

  When the application runs in user can change min or max value of the range by clicking on the lable of ticks and changing the value.

  Need a way to prevent/protect, make unmodifiable.

  Thank you

  Yuri

  Range scale of editing is controlled by the InteractionMode property to the cursor. To turn off the EditRange , you can assign a different set of indicator values, such as InteractionMode="ArrowKeys,Drag,Snap,ScrollWheel" .

• IOM 9 - How can I disable the user profile change email?

  I disabled the approval process for user profile change (subordinate tasks in this process task), but whenever a user edits their own profile, they always get an email from [email protected] with "Edit profile application received.
  
  I can't know what process is sending this e-mail. Someone at - it indexes?
  
  Thank you

  Change the defintion of e-mail not to include an e-mail address to send from. Or rename the definition of e-mail. It could be a setting in the configuration of the system as well.

  -Kevin

• How to give Admin rights for specific applications in windows 7 Stater

  How to give Admin rights for specific applications in windows 7 Stater

  I have a problem in Windows 7 Stater Pack

  I do not know where to place the issue or create the question

  My problem is that I can give admin access to application specific to Windows 7 stater

  in fact I use photon AUNTIE I want to be accessed by a Local user Standard user is not an admin user

  Once I click on the icon of Photon to connect it always ask for admin password.

  I want to work on a local user without admin password

  Please help about this.

  Thank you.

  Hello

  Note: To be logged in as an administrator or enter creditionals administrator account to make changes

  Method 1:

  The prompt that you get is the setting on your computer user account control. You can change the setting and use them according to your requirements and run programs in the standard account. See the below links for more details-

  http://Windows.Microsoft.com/en-us/Windows7/what-is-user-account-control

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  http://Windows.Microsoft.com/en-us/Windows7/what-are-user-account-control-settings

  WARNING: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  You can even use the steps below and check-

  1. right click on the program file , click on Properties.

  2. now click on compatibility and select run the program as administrator.

  3. now click on change settings for all users and click ok. Now, check to see if the problem resolves.

  I hope this helps. Let us know the results

  It may be useful