How to handle the reversed letters (Devanāgarī)?

Similar Questions

• How to handle the onTriggered many ActionItem created dynamically

  Hi, I created the ActionItem dynamically using (loop)

  because data is from webservice

  How to handle the onTrigerred?

  If my code is like this:

  for (int i = 0; i)< alist.count();="">

  {

  My page page * = iRoot-->findChild ("SpecificObject");
  ActionItem * action = ActionItem::create () .title (aList [i] .name);

  bool res = QObject::connect (action, SIGNAL (triggered ()), this, SLOT (handleAction (())); what I'm confused because I don't know what action is triggered
  Q_ASSERT (res);
  Q_UNUSED (res);

  my page-> addAction (action, ActionBarPlacement:efault);

  }

  MyClass::handleAction() Sub

  {

  aFunction(); This parameter of function required of aList, said user.user aList [i]

  }

  Do I need to create handleAction() as well as added actionItem SLOT

  But I don't know how much action added because it is dynamic server

  Thank you

  There are a few options:

  Create a single location and connect all the signals. You can then call sender() into the slot to retrieve the object that sent the signal and go from there. You can also use a QSignalMap that maps each signal to a value and send this value to a single location. You can also use QSignalMap::sender() to get the sender object.

  I used the QSignalMap to do something similar for handling created dynamically successfully drop-down lists.

• How to make the menu letters more when you use Lightroom 4?

  How to make the menu letters more when you use Lightroom 4?

  Hey Lenovo W510,.

  The police of interface only option in Lightroom of sizing is in the preferences > Interface > panels > Font Size (Small/Large)

  The configuration in grand and then restarting Lightroom will increase the fonts you see in the signs that describe the functions of LR.

  If you're on Mac or Windows you might also decrease your screen/display resolution that will make everything look bigger on your screen.

  Hope this helps,

  Kind regards

  Pete

• How to handle the case of zero insert line?

  11.2.0.2, I want to insert into a table and you want to handle the case where the zero line is inserted. I use the following code and hope an exception is caught and let me have the chance to do something

  set serveroutput on
  begin
  insert into his2051 select * from his2051  where today not in ( select distinct today from his2051 );
   EXCEPTION
      WHEN NO_DATA_FOUND THEN
          DBMS_OUTPUT.PUT_LINE('NO_DATA_FOUND exception ' );       
      WHEN OTHERS THEN
          DBMS_OUTPUT.PUT_LINE('OTHERS exception ' );       
  end;

  The block runs OK, but not seen release. How to handle the case of insertion of line 0?

  This will do what you want:

  set serveroutput on
  begin
  insert into his2051 select * from his2051  where today not in ( select distinct today from his2051 );
   if SQL%ROWCOUNT = 0 THEN
          DBMS_OUTPUT.PUT_LINE('%rowcount must be  [' || SQL%ROWCOUNT || '].' );
          DBMS_OUTPUT.PUT_LINE('NO_DATA_FOUND - but won't cause an exception ' );
   END IF;
   EXCEPTION
      WHEN OTHERS THEN
          DBMS_OUTPUT.PUT_LINE('OTHERS exception ' );
  end;
  

• How to handle the null value

  Hi all

  Can someone tell me how to handle null.

  I have a radio button, I need to capture the worth and inspiring I have a search criterion.

  If I select the radio button without problem. If I did not choose the option button it gives me the error.

  	OAMessageRadioButtonBean var1 = (OAMessageRadioButtonBean) webBean.findChildRecursive ("job");
  	If (var1! = null)
  	{
  	S1 = var1.getValue (pageContext) m:System.NET.SocketAddress.ToString ();
  	}

  Please suggest.

  Kind regards

  Sangu

  S1 = (String) var1. GetValue (PageContext);

• Inactive Contacts - how you handle the?

  We currently have XXX, XXX (there is no way I'm telling you, in fact) of contacts in Eloqua, which is not just whatever be done in a VERY long time. We have recently acquired another company who does not use Eloqua and working on their integration in our system. Now I'm sure that like Eloqua me just buy more space, I work on a project to clean up the deadbeats and leave room for shiny new customers. The program that we run has three points of contact, and if a customer engages in any of the steps they got out the program and will be left in the system. In the last step we let them know that if we do not hear back from them within 10 days, we will assume that they are super busy and we will remove them from our database. Also, we are ignoring those who joined in the last 12 months, because they can always be interested in reading some of our materials and have not gotten yet around him.

  This seems to be an Amir of a program and will surely cause our stats boost then because we send is more people that never open anything.

  How you handle these kinds of people? Do you agree with our approach?

  Absolutely!  It is a perfect process.  In my life earlier as someone who was directly in the marketing of opps, we did this process manually about every 3 months.  Automating this process with a campaign and send to the PB to automatically remove contact looks a perfect nurture automated.

  You can even include the verbiage in the last email, if they "do not" provide this mail they will be removed from the system.

• How to handle the task of automation without connection SGD-Automation

  Hello
  
  I have created an Automation task, the task performs the work, but after completing the work, I need to connect SGD-automation user and update the status of the task to move to the next step. How to avoid manual handling in the task of automation? How to do the task to go to the next manual task without connection with CMS-automation.
  
  
  Kind regards
  Marg

  In your Xquery use the syntax "context: completeTaskOnExit ($context, $exitStatus).

  Set these two variables ($context, $exitStatus) according to your required exit status.

  Hope this has helped.

  Thank you

• How to handle the no_data_found exception

  Hi all
  
  How to treat no_data_found exception in the procedure. I created a procedure with the cursor, the cursor loop and passing the value to the select statement (in the where clause). It works fine if the select statement returns one other wise he throws exception no_data_found, but I want to continue execution after the statement select returns no ecor. Please let me know how to handle this.
  
  
  Thank you and best regards,
  Rajasekhar

  Hello
  Assuming it's the syntax of your procedure:

  create or replace procedure XXXXXX as
  .
  .
  
  .
  .
  
  for cur_rec in 
  loop
  .
  .
  .
  
  .
  .
  .
  begin
  
  exception
  when no_data_found then
  
  end;
  .
  .
  
  .
  .
  end loop;
  .
  .
  end procedure;
  

• How to stop the reversal of colors in iBooks on iPad Pro

  What setting should I use to stop the reversal of colors in iBooks on iPad Pro?

  I use on my Pro iPad iBooks.  I only got the iPad Pro for 2 weeks and for the first time, last night, I opened iBooks in a low light situation and the colors were reversed (white text on black background).  I can't remember can adjust any setting to cause this.

  I know that you can go into the settings and specifically to invert the colors which causes all the colors, in and out of apps, reversal, but I did not do this.

  I know that you can set the accessibility shortcut to allow the reversal of colors by triple clicking on the home button, but I had not done that.

  I called Apple Support earlier, explained the problem and to enter iBooks was surprised to see no reversal of colors.  I ended up thinking of appeal that I have to wait until the evening to see if the problem occurs.

  Because now we have storms and no sun, levels of brightness inside the House are very low, and a piece in particular is extremely dark.  So, I entered my normally lit room in iBooks.  There was no reversal of colors.  Then I walked into the dark room, and as soon as I did, the colors reversed!  When I came back, they reversed back to normal.

  Of course, there is some kind of sensor that is the cause.  I was not able to find any other application where this happens.

  I realize that there could be some thinking that Apple put in place iBooks for this operation to reduce eye fatigue in low light conditions, and that's fine.  But if that's true, then why not do it for all applications?

  In any case, I prefer to control when and where to invert the colors.

  What setting should I use to stop the reversal of colors in iBooks on my iPad Pro?

  I don't think it's user controlled - it's similar to Apple (Apple) cards - I did some research when a user has a question about the reversal of the colours in the cards of Apple and did not set a user active

• How to handle the larger size than the movie disc?

  I couldn't see a razor tool, or something like that in yet that I can use to cut the video if it is larger that the DVD could hold.  What could I do if I am OK to remove some content in order to fit into the drive?

  Thank you!

  How to cut the timeline?  This is the part that I don't understand.

  I don't know that you can. And if you can, I'm not saying that it is a bad idea.

  Drag the end to the beginning. This makes it shorter.

  Drag the beginning to the end; then drag the element remaining in the beginning (do not leave any space empty).

• How to handle the OAMessageLovInputBean Action?

  Hello
  
  Can someone help me on how to manage the activity or action of OAMessageLOVInputBean?
  
  Thank you.
  
  Jon

  Jon,

  If (pageContext.isLovEvent ())
  {
  Form has been sent because the user has selected a value from the LOV modal window, either because the user tabs to the LOV of entry.
  Find out what entry LOV triggered the event.

  String lovInputSourceId = pageContext.getLovInputSourceId ();

  At this point, all data are available in the VO base, just like regular events of PPR. Call AM an method for updating application VO properties.

  If ("myLovInput".equals (lovInputSourceId))
  {
  am.invokeMethod ("handleMyLovInputEvent"); Invoking method here AM
  }
  }

  Thank you
  -Anil

• How to keep the drive letters between the BONES of switching?

  1 HARD drive contains C: for OS + q: for the backup + w: for backup

  Drive HARD 2 door V: for OS + D: data + T: for backup

  3 HARD drive contains X: for OS + Y: for Backup + z: for backup

  When I put HDD1 active drive for operating system in the BIOS, and before drive letter, which works fine when I start window, but

  When I put HDD2 active disk for OS within the BIOS and above randomly changed drive letters.

  I would like to know when I put HDD2 active disk, will the letter v: replace C:? How the handle of the window of the drive letter when changing OS disk from HDD1 to HDD2?

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  If Windows was installed on a partition C: drive and cloned the drive with two partition v.

  Windows must change the letters if a player is off arrangement.

  the clone is an exact copy from where it comes.

  try to put two in the car which was driving one and then change the letters for all that.

• How to handle the case end good app?

  Hello

  I'm creating an application for BB Storm2 5.0 device. I have a function to maintain a custom in app menu item native contacts, and clicking from there, brings to my screen of the application. It works very well.

  Problem occurs in the following steps:

  Steps to follow:

  1. start my native element menu contacts application, launch my app successfully screen.

  2. then if I press the red button, launching the device home screen.

  3 then run on the native Contacts application once again, throw my request directly instead of native contacts.

  Because in step 1, I launched my application screen in the menu contacts native. Because it does not have closed earlier, lance on native contacts spear my request.

  Anyone explain how can I handle this situation?

  Thank you.

  What amrishodiq said, this isn't 100% correct.  Let me correct that, then explain what you see:

  You can add the ApplicationMenuItems without even starting your Application, by doing this in the treatment of hand (.).  If your application is present or not is irrelevant.  In fact, if you add them to the start of your application, you can get several added entries, must be careful about this.

  What amrishodiq said about the red button and the usual methods of closing an Application is correct.  If you really want to exit your Application, is to call System.exit (.).  This happens automatically if you use the screen and you close the last screen in the stack to display.

  That said, you're doing something completely different here.

  You run in a Menu of Application element.  This menu item runs your code, but it is actually run by the Contact Application.  That's why, when press the red button and then relaunch the application contact, you view your screen.  If you had an icon for your Application and you have clicked on that right now, you will see a different screen.

  In this case, if your screen called System.exit (.), he was closing the Contacts Application.

  The problem of the listeners and ApplicationMenuItems running in the Application they are related is something that comes up quite often on this forum.  You really need move on to your own application and process the contact in there.  There are complications with it, make it seem easier to do what you're doing, that is just run your screens under enforcement Contacts.  However, I would recommend that you look at putting in a global events in the context of switch for your application, I think it's a better long-term solution.

• How to handle the UAC to run the file?

  Get a weather app to run each time that the boot of win7, but it always pop up to alert security of the UAC.

  I would like to know any approach to handle this situation:

  (1) add known run the file in the lists of confidence, so he would not jump to the top once again

  (2) turn off UAC

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  There is no "trust list" for UAC because that would be a weakness that hackers could exploit immediately. You have these options:

  • Download a compatible version of Windows 7 software.
  • Ask the supplier, how it can be changed to be compatible Windows 7.
  • Turn off UAC (not recommended)

• How to handle the end makes arriving in OWB

  Hello everyone

  I have a table of facts related to a dimension with SCD type2. My problem comes when I files in fact arrive late (a few documents that belong to the past are coming now and I have to connect them to records in dimension to this date in the past). I created a card and fill in the ACTIVE_DATE field in effect at the relevant date (INFO_DATE). The query that is generated from this map is like this:

  SELECT * s "STG" JOIN "DIM" d "" "ON s." CRNC_CD "= d." DETAIL_BUSINESS ". WHERE (d."DIMENSION_KEY" (= d."DETAIL_PK") AND (d."DETAIL_PK" IS NOT NULL) AND ( ( d." Correspondents' is null) OR ( d." ("" "" ' Correspondents' IS NOT NULL AND s."INFO_DATE" BETWEEN d. "EFFECTIVE_DATE" AND d. ' correspondents ' ) )

  Let's say we have an element with 2 revisions in my dimension table:

  CORRESPONDENTS	EFFECTIVE_DATE	CRNC_CD
  29 SEP-14	JUNE 10, 14	02
  NULL VALUE

  29 SEP-14

  02

  Now, if a recording made happen with his return date to the "request" 28-SEP-14, in the foregoing conditions highlighted are correct and the two dimension rows are returned, which isn't what I want. How can I handle this?

  What I did as a solution was to modify the generated code and run this as a package, instead of executing the plan:

  SELECT * s "STG" JOIN "DIM" d

  "" "ON s." CRNC_CD "= d." DETAIL_BUSINESS ".

  WHERE

  (d."DIMENSION_KEY" (= d."DETAIL_PK") AND (d."DETAIL_PK" IS NOT NULL) AND

  (

  ( d." (' ' ' Correspondents' IS NULL AND s.' INFO_DATE ' > = d. "EFFECTIVE_DATE") OR

  ( d." (' "'" ' Correspondents' IS NOT NULL AND s."INFO_DATE" BETWEEN d. "EFFECTIVE_DATE" AND d. "CORRESPONDENTS")

  )